Article

Ramognino, Federico ; Sforza, Lorenzo ; Lucchini, Tommaso ; Welch, Cooper ; Böhm, Benjamin ; Onorati, Angelo (2025)
A CFD ignition model to predict average-cycle combustion in SI engines with extreme EGR levels.
In: International Journal of Engine Research, 2024, 25 (5)
doi: 10.26083/tuprints-00027273
Article, Secondary publication, Publisher's Version

Lien, Hao-Pin ; Welch, Cooper ; Li, Yongxiang ; Pati, Andrea ; Hasenzahl, Max ; Sadiki, Amsini ; Böhm, Benjamin ; Hasse, Christian (2025)
Spray formation and spray-wall-flow interaction in a gasoline direct-injection (GDI) engine under early-injection conditions: A flow bench study.
In: International Journal of Engine Research, 2024, 25 (8)
doi: 10.26083/tuprints-00027895
Article, Secondary publication, Publisher's Version

Broese, Carsten ; Tsakmakis, Charalampos ; Üngör, Özer (2025)
Consistent Euler–Bernoulli beam theory in statics for gradient elasticity based on Laplacians of stress and strain.
In: Mathematics and Mechanics of Solids, 2024, 29 (1)
doi: 10.26083/tuprints-00027141
Article, Secondary publication, Publisher's Version

Karev, Artem ; Hagedorn, Peter (2024)
Asynchronous parametric excitation: validation of theoretical results by electronic circuit simulation.
In: Nonlinear Dynamics : An International Journal of Nonlinear Dynamics and Chaos in Engineering Systems, 2020, 102 (1)
doi: 10.26083/tuprints-00023894
Article, Secondary publication, Publisher's Version

Franceschi, Alessandro ; Jaeger, Fabian ; Hoche, Holger ; Oechsner, Matthias ; Groche, Peter (2024)
Calibration of the residual stresses with an active die during the ejection phase of cold extrusion.
In: International Journal of Material Forming, 2021, 14 (2)
doi: 10.26083/tuprints-00024004
Article, Secondary publication, Publisher's Version

Trabold, J. ; Hartl, S. ; Walther, S. ; Johchi, A. ; Dreizler, A. ; Geyer, D. (2024)
Fuel Effects in Turbulent Premixed Pre-vaporised Alcohol/Air Jet Flames.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023887
Article, Secondary publication, Publisher's Version

Sun, Z. ; Hasse, C. ; Scholtissek, A. (2024)
Ignition Under Strained Conditions: A Comparison Between Instationary Counterflow and Non-premixed Flamelet Solutions.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (4)
doi: 10.26083/tuprints-00023885
Article, Secondary publication, Publisher's Version

Dressler, L. ; Sacomano Filho, F. L. ; Sadiki, A. ; Janicka, J. (2024)
Influence of Thickening Factor Treatment on Predictions of Spray Flame Properties Using the ATF Model and Tabulated Chemistry.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023920
Article, Secondary publication, Publisher's Version

Mariño-Salguero, Jessica ; Schäfer, Michael (2024)
A Modified Normalized Weighting Factor method for improving the efficiency of the blended high-resolution advection schemes in the context of multiphase flows.
In: Experimental and Computational Multiphase Flow, 2021, 3 (3)
doi: 10.26083/tuprints-00024025
Article, Secondary publication, Publisher's Version

Schmidt, Marius ; Ding, Carl-Philipp ; Peterson, Brian ; Dreizler, Andreas ; Böhm, Benjamin (2024)
Near-Wall Flame and Flow Measurements in an Optically Accessible SI Engine.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023922
Article, Secondary publication, Publisher's Version

Steinhausen, M. ; Luo, Y. ; Popp, S. ; Strassacker, C. ; Zirwes, T. ; Kosaka, H. ; Zentgraf, F. ; Maas, U. ; Sadiki, A. ; Dreizler, A. ; Hasse, C. (2024)
Numerical Investigation of Local Heat-Release Rates and Thermo-Chemical States in Side-Wall Quenching of Laminar Methane and Dimethyl Ether Flames.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023921
Article, Secondary publication, Publisher's Version

Zirwes, Thorsten ; Häber, Thomas ; Zhang, Feichi ; Kosaka, Hidemasa ; Dreizler, Andreas ; Steinhausen, Matthias ; Hasse, Christian ; Stagni, Alessandro ; Trimis, Dimosthenis ; Suntz, Rainer ; Bockhorn, Henning (2024)
Numerical Study of Quenching Distances for Side-Wall Quenching Using Detailed Diffusion and Chemistry.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023883
Article, Secondary publication, Publisher's Version

Luo, Yujuan ; Strassacker, Christina ; Wen, Xu ; Sun, Zhen ; Maas, Ulrich ; Hasse, Christian (2024)
Strain Rate Effects on Head-on Quenching of Laminar Premixed Methane-air flames.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023886
Article, Secondary publication, Publisher's Version

Friedrich, Jonas ; Schäfer, Michael (2024)
Towards an Acoustic Simulation of a Water Drop Impacting in a Water Pool.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2020, 105 (4)
doi: 10.26083/tuprints-00023923
Article, Secondary publication, Publisher's Version

Ries, Florian ; Li, Yongxiang ; Nishad, Kaushal ; Dressler, Louis ; Ziefuss, Matthias ; Mehdizadeh, Amirfarhang ; Hasse, Christian ; Sadiki, Amsini (2024)
A Wall-Adapted Anisotropic Heat Flux Model for Large Eddy Simulations of Complex Turbulent Thermal Flows.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023884
Article, Secondary publication, Publisher's Version

Esser, Arved ; Eichenlaub, Tobias ; Schleiffer, Jean-Eric ; Jardin, Philippe ; Rinderknecht, Stephan (2024)
Comparative evaluation of powertrain concepts through an eco-impact optimization framework with real driving data.
In: Optimization and Engineering : International Multidisciplinary Journal to Promote Optimization Theory & Applications in Engineering Sciences, 2021, 22 (2)
doi: 10.26083/tuprints-00023896
Article, Secondary publication, Publisher's Version

Kubik, Christian ; Hohmann, Johannes ; Groche, Peter (2024)
Exploitation of force displacement curves in blanking—feature engineering beyond defect detection.
In: The International Journal of Advanced Manufacturing Technology, 2021, 113 (1-2)
doi: 10.26083/tuprints-00023456
Article, Secondary publication, Publisher's Version

Franz, Benjamin ; Sielaff, Axel ; Stephan, Peter (2024)
Numerical Investigation of Successively Nucleating Bubbles During Subcooled Flow Boiling of FC-72 in Microgravity.
In: Microgravity Science and Technology : An International Journal for Microgravity and Space Exploration Related Research, 2021, 33 (2)
doi: 10.26083/tuprints-00023543
Article, Secondary publication, Publisher's Version

Attili, Antonio ; Farmand, Pooria ; Schumann, Christoph ; Farazi, Sima ; Böhm, Benjamin ; Li, Tao ; Geschwindner, Christopher ; Köser, Jan ; Dreizler, Andreas ; Pitsch, Heinz (2024)
Numerical Simulations and Experiments of Ignition of Solid Particles in a Laminar Burner: Effects of Slip Velocity and Particle Swelling.
In: Flow, Turbulence and Combustion : An International Journal published in association with ERCOFTAC, 2021, 106 (2)
doi: 10.26083/tuprints-00023881
Article, Secondary publication, Publisher's Version

Müller, Tim M. ; Leise, Philipp ; Lorenz, Imke-Sophie ; Altherr, Lena C. ; Pelz, Peter F. (2024)
Optimization and validation of pumping system design and operation for water supply in high-rise buildings.
In: Optimization and Engineering : International Multidisciplinary Journal to Promote Optimization Theory & Applications in Engineering Sciences, 2021, 22 (2)
doi: 10.26083/tuprints-00023895
Article, Secondary publication, Publisher's Version

Drewing, Nadine ; Ahmadi, Arjang ; Xiong, Xiaofeng ; Sharbafi, Maziar Ahmad (2024)
Comparison of Empirical and Reinforcement Learning (RL)-Based Control Based on Proximal Policy Optimization (PPO) for Walking Assistance: Does AI Always Win?
In: Biomimetics, 2024, 9 (11)
doi: 10.26083/tuprints-00028848
Article, Secondary publication, Publisher's Version

Abraham, Tim ; Bialuch, Ingmar ; Bräuer, Günter ; Flegler, Felix ; Groche, Peter (2024)
Deposition of Nanoscopically Smooth DLC Tool Coatings for Dry Forming of Aluminum Sheets.
In: JOM : The Journal of The Minerals, Metals & Materials Society (TMS), 2020, 72 (7)
doi: 10.26083/tuprints-00023959
Article, Secondary publication, Publisher's Version

Flegler, Felix ; Groche, Peter ; Abraham, Tim ; Bräuer, Günter (2024)
Dry Deep Drawing of Aluminum and the Influence of Sheet Metal Roughness.
In: JOM : The Journal of The Minerals, Metals & Materials Society (TMS), 2020, 72 (7)
doi: 10.26083/tuprints-00023960
Article, Secondary publication, Publisher's Version

Groche, Peter ; Schmidt, Wilhelm (2024)
Wear Prediction in Oscillating Cold Forging Processes.
In: Tribology Letters, 2020, 68 (4)
doi: 10.26083/tuprints-00023940
Article, Secondary publication, Publisher's Version

Harries, Leandro ; Kempf, David ; Scheidig, Matthias ; Schütz, Maximilan ; Middendorf, Moritz ; Uzar, Kazim ; Su, Xiaohui ; Böhm, Stefan ; Liu, Jia (2024)
Assessing Asphalt Pavement Pre-Compaction with Paver Screed Frequency Measurements.
In: Procedia Structural Integrity, 2024, 64
doi: 10.26083/tuprints-00028822
Article, Secondary publication, Publisher's Version

Scheidig, Matthias ; Uzar, Kazim ; Kempf, David ; Harries, Leandro ; Böhm, Stefan ; Liu, Jia (2024)
Load-Bearing Capacity Assessment of Traffic Superstructures for Roads and Tramways.
In: Procedia Structural Integrity, 2024, 64
doi: 10.26083/tuprints-00028823
Article, Secondary publication, Publisher's Version

Gazenbiller, Eugen ; Arya, Visheet ; Reitz, Rüdiger ; Oechsner, Matthias ; Zheludkevich, Mikhail L. ; Höche, Daniel (2024)
Mechanistic insights into chemical corrosion of AA1050 in ethanol‐blended fuels with water contamination via phase field modeling.
In: Materials and Corrosion = Werkstoffe und Korrosion, 2024, 75 (9)
doi: 10.26083/tuprints-00028270
Article, Secondary publication, Publisher's Version

Ahmels, Laura ; Bruns, Sebastian ; Durst, Karsten ; Bruder, Enrico (2024)
Observation of Grain Boundary Sliding in a Lamellar Ultrafine‐Grained Steel.
In: Advanced Engineering Materials, 2024, 26 (19)
doi: 10.26083/tuprints-00028271
Article, Secondary publication, Publisher's Version

Hesseler, Jan ; Baumgartner, Jörg ; Bleicher, Christoph (2024)
Consideration of the transient material behavior under variable amplitude loading in the fatigue assessment of nodular cast iron using the strain‐life approach.
In: Fatigue & Fracture of Engineering Materials & Structures, 2021, 44 (10)
doi: 10.26083/tuprints-00028123
Article, Secondary publication, Publisher's Version

Fass, Markus ; Hecht, Matthias ; Baumgartner, Jörg ; Bauer, Niklas (2024)
Evaluation of the approach based on the maximum principal stress from the IIW-Recommendation for welded joints under proportional, multiaxial stress states.
In: Welding in the World, 2023, 67 (10)
doi: 10.26083/tuprints-00028121
Article, Secondary publication, Publisher's Version

Bauer, N. M. ; Baumgartner, J. ; Fass, M. (2024)
Fatigue life evaluation of welded joints under multiaxial loading for different stress concepts using an extended Gough-Pollard criterion.
In: Welding in the World, 2024, 68 (8)
doi: 10.26083/tuprints-00028120
Article, Secondary publication, Publisher's Version

Baumgartner, Jörg ; Tillmann, Wolfgang ; Bobzin, Kirsten ; Öte, Mehmet ; Wiesner, Stefanie ; Sievers, Norman (2024)
Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches.
In: Welding in the World : The International Journal of Materials Joining, 2020, 64
doi: 10.26083/tuprints-00028118
Article, Secondary publication, Publisher's Version

Hensel, J. ; Köhler, M. ; Uhlenberg, L. ; Castro, J. Diniz e ; Dilger, K. ; Faß, M. ; Baumgartner, J. (2024)
Laser welding of 16MnCr5 butt welds with gap: resulting weld quality and fatigue strength assessment.
In: Welding in the World, 2022, 66 (9)
doi: 10.26083/tuprints-00028122
Article, Secondary publication, Publisher's Version

Hofmann, Marius ; Faß, Markus ; Eberhard, Andrea ; Klein, Macus ; Baumgartner, Jörg ; Oechsner, Matthias ; Melz, Tobias (2024)
Method of accumulation of preload loss of bolted joints due to rotational self-loosening caused by cyclic, transversal excitation.
In: Engineering Failure Analysis, 2024, 162
doi: 10.26083/tuprints-00028114
Article, Secondary publication, Publisher's Version

Puchtler, Steffen ; Kuip, Julius van der ; Becker-Dombrowsky, Florian Michael ; Kirchner, Eckhard (2024)
Impedance measurement of rolling bearings using an unbalanced AC wheatstone bridge.
In: Frontiers in Mechanical Engineering, 2024, 10
doi: 10.26083/tuprints-00028785
Article, Secondary publication, Publisher's Version

Lenchuk, Olena ; Rohrer, Jochen ; Albe, Karsten (2024)
Mo–Si Alloys Studied by Atomistic Computer Simulations Using a Novel Machine‐Learning Interatomic Potential: Thermodynamics and Interface Phenomena.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028276
Article, Secondary publication, Publisher's Version

Arya, V. ; Gazenbiller, E. ; Reitz, R. ; Oechsner, M. ; Höche, D. (2024)
Evaluation of innovative microreactor for examination of alkoxide pitting corrosion and data generation for numerical transient model.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2024, 55 (3)
doi: 10.26083/tuprints-00028283
Article, Secondary publication, Publisher's Version

Bernauer, Jan ; Kredel, Samuel Aeneas ; Ionescu, Emanuel ; Riedel, Ralf (2024)
Polymer‐Derived Ceramic Coatings with Excellent Thermal Cycling Stability.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028280
Article, Secondary publication, Publisher's Version

Fathidoost, Mozhdeh ; Yang, Yangyiwei ; Thor, Nathalie ; Bernauer, Jan ; Pundt, Astrid ; Riedel, Ralf ; Xu, Bai‐Xiang (2024)
Thermal Conductivity Analysis of Polymer‐Derived Nanocomposite via Image‐Based Structure Reconstruction, Computational Homogenization, and Machine Learning.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028282
Article, Secondary publication, Publisher's Version

Kuhn, Carola ; Knapp, Anna ; Deutschmann, Max P. ; Spielmann, Jonas ; Tischer, Steffen ; Kramm, Ulrike I. ; Nirschl, Hermann ; Deutschmann, Olaf (2024)
Iron as Recyclable Metal Fuel: Unraveling Oxidation Behavior and Cyclization Effects Through Thermogravimetric Analysis, Wide‐Angle X‐ray Scattering and Mössbauer Spectroscopy.
In: ChemSusChem, 2024, 17 (15)
doi: 10.26083/tuprints-00028287
Article, Secondary publication, Publisher's Version

Filipovic, Jurica ; Beck, Katharina ; Kontermann, Christian ; Galetz, Mathias ; Oechsner, Matthias (2024)
Mechanical Characterization Potentials of Aluminide Diffusion Coatings on Molybdenum Substrates.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028290
Article, Secondary publication, Publisher's Version

Kannapinn, Maximilian ; Köhler, Felix ; Schäfer, Michael (2024)
A Validated Thermal Computational Fluid Dynamics Model of Wine Warming in a Glass.
In: Applied Sciences, 2024, 14 (19)
doi: 10.26083/tuprints-00028670
Article, Secondary publication, Publisher's Version

Pondrom, P. ; Sessler, G. M. ; Bös, J. ; Melz, T. (2024)
Compact electret energy harvester with high power output.
In: Applied Physics Letters, 2016, 109 (5)
doi: 10.26083/tuprints-00028667
Article, Secondary publication, Publisher's Version

Hillenbrand, J. ; Pondrom, P. ; Sessler, G. M. (2024)
Electret transducer for vibration-based energy harvesting.
In: Applied Physics Letters, 2015, 106 (18)
doi: 10.26083/tuprints-00028663
Article, Secondary publication, Publisher's Version

Stender, Merten ; Adams, Christian ; Wedler, Mathies ; Grebel, Antje ; Hoffmann, Nobert (2024)
Explainable machine learning determines effects on the sound absorption coefficient measured in the impedance tube.
In: The Journal of the Acoustical Society of America, 2021, 149 (3)
doi: 10.26083/tuprints-00028662
Article, Secondary publication, Publisher's Version

Pondrom, P. ; Hillenbrand, J. ; Sessler, G. M. ; Bös, J. ; Melz, T. (2024)
Vibration-based energy harvesting with stacked piezoelectrets.
In: Applied Physics Letters, 2014, 104 (17)
doi: 10.26083/tuprints-00028666
Article, Secondary publication, Publisher's Version

Neubauer, Philipp ; Tschesche, Johannes ; Bös, Joachim ; Melz, Tobias ; Hanselka, Holger (2024)
An active-system approach for eliminating the wolf note on a cello.
In: The Journal of the Acoustical Society of America, 2018, 143 (5)
doi: 10.26083/tuprints-00028668
Article, Secondary publication, Publisher's Version

Fang, Xufei ; Zhang, Jiawen ; Frisch, Alexander ; Preuß, Oliver ; Okafor, Chukwudalu ; Setvin, Martin ; Lu, Wenjun (2024)
Room‐temperature bulk plasticity and tunable dislocation densities in KTaO₃.
In: Journal of the American Ceramic Society, 2024, 107 (11)
doi: 10.26083/tuprints-00028296
Article, Secondary publication, Publisher's Version

Sattler, Bernhard Jonathan ; Tundis, Andrea ; Friesen, John ; Pelz, Peter F. (2024)
Modeling Water Availability during a Blackout under Consideration of Uncertain Demand Response.
In: Engineering Proceedings, 2024, 69 (1)
doi: 10.26083/tuprints-00028216
Article, Secondary publication, Publisher's Version

Walther, Steffen ; Li, Tao ; Geyer, Dirk ; Dreizler, Andreas ; Böhm, Benjamin (2024)
Soot and Flame Structures in Turbulent Partially Premixed Jet Flames of Pre-Evaporated Diesel Surrogates with Admixture of OMEₙ.
In: Fluids, 2024, 9 (9)
doi: 10.26083/tuprints-00028215
Article, Secondary publication, Publisher's Version

Liu, Jia ; Böhm, Stefan ; Middendorf, Moritz (2024)
Erweiterte Schienenkompetenz an der Technischen Universität Darmstadt.
In: Deine Bahn, 2022, 50 (5)
doi: 10.26083/tuprints-00028562
Article, Secondary publication, Publisher's Version

Grammes, Thilo ; Limbach, René ; Bruns, Sebastian ; Wüllen, Leo van ; Ligny, Dominique de ; Kamitsos, Efstratios I. ; Durst, Karsten ; Wondraczek, Lothar ; Brauer, Delia S. (2024)
Tailoring the Mechanical Properties of Metaluminous Aluminosilicate Glasses by Phosphate Incorporation.
In: Frontiers in Materials, 2020, 7
doi: 10.26083/tuprints-00026699
Article, Secondary publication, Publisher's Version

Heider, B. ; Oechsner, M. ; Reisgen, U. ; Ellermeier, J. ; Engler, T. ; Andersohn, G. ; Sharma, R. ; Gonzalez Olivares, E. ; Zokoll, E. (2024)
Corrosion Resistance and Microstructure of Welded Duplex Stainless Steel Surface Layers on Gray Cast Iron.
In: Journal of Thermal Spray Technology, 2020, 29 (4)
doi: 10.26083/tuprints-00024005
Article, Secondary publication, Publisher's Version

Recio Balmaseda, Sandra ; Karpowski, Tim Jeremy Patrick ; Nicolai, Hendrik ; Koob, Philipp ; Greifenstein, Max ; Dreizler, Andreas ; Hasse, Christian (2024)
Numerical Invenstigation of Effusion Cooling Air Influence on the CO Emissions for a Single-Sector Aero-Engine Model Combustor.
In: Journal of Engineering for Gas Turbines and Power, 2024, 146 (12)
doi: 10.26083/tuprints-00028126
Article, Secondary publication, Postprint

Middendorf, Moritz ; Umbach, Cristin ; Liu, Jia ; Koenders, Eduardus A. B. (2024)
Contact area analysis of an asphalt-concrete boundary layer with X-ray computed tomography imaging.
In: Construction and Building Materials, 2024, 430
doi: 10.26083/tuprints-00028163
Article, Secondary publication, Publisher's Version

Brötz, Johannes ; Schänzle, Christian ; Pelz, Peter F. (2024)
Exergy-Based Efficiency Assessment of Fans vs. Isentropic Efficiency.
In: International Journal of Turbomachinery, Propulsion and Power, 2023, 8 (4)
doi: 10.26083/tuprints-00026556
Article, Secondary publication, Publisher's Version

Nitsch, Antonia ; Leuthold, Julia ; Machaček, Jan ; Grandas Tavera, Carlos Eduardo (2024)
Experimental Investigations on Hydro-mechanical Processes in Reconstituted Clay Shale and Their Significance for Constitutive Modelling.
In: Rock Mechanics and Rock Engineering, 2023, 56 (4)
doi: 10.26083/tuprints-00026467
Article, Secondary publication, Publisher's Version

Kircher, Magnus ; Schneider, Jonathan ; Popp, Sebastian ; Gierth, Sandro ; Günther, Marco ; Hasse, Christian (2024)
Experimental and model-based analysis of combustion and auto-ignition of gasoline and three surrogate fuels in a single-cylinder research engine operated under knocking conditions.
In: International Journal of Engine Research, 2023, 24 (6)
doi: 10.26083/tuprints-00024040
Article, Secondary publication, Publisher's Version

Liu, Jia ; Freudenstein, Stephan (2024)
Investigations on ballastless tracks in tunnel without reinforcement.
In: Electronic Journal of Structural Engineering, 2013, 13 (1)
doi: 10.26083/tuprints-00028162
Article, Secondary publication, Publisher's Version

Harries, Leandro ; Schütz, Maximilian ; Kempf, David ; Liu, Jia (2024)
Methods of Asphalt Petrology: Determination of Permeability.
In: International Journal of Civil Infrastructure, 2023, 6
doi: 10.26083/tuprints-00028160
Article, Secondary publication, Publisher's Version

Noll, Dennis ; Hönicke, Philipp ; Kayser, Yves ; Wagner, Stefan ; Beckhoff, Burkhard ; Schwalke, Udo (2024)
Transfer-Free In Situ CCVD Grown Nanocrystalline Graphene for Sub-PPMV Ammonia Detection.
In: ECS Journal of Solid State Science and Technology, 2018, 7 (7)
doi: 10.26083/tuprints-00020384
Article, Secondary publication, Publisher's Version

Kuhr, Maximilian M. G. ; Pelz, Peter F. (2024)
Experimental identification of the force and moment characteristic of symmetrically and non-symmetrically profiled annular seals.
In: Bulletin of the Polish Academy of Sciences Technical Sciences, 2023, 71 (6)
doi: 10.26083/tuprints-00026557
Article, Secondary publication, Publisher's Version

Pelz, Peter F. ; Lemmer, Jan ; Schmitz, Christian B. (2024)
Misled by Betz and unsteady flow – review on turbine arrays falsely deemed ‘optimal’.
In: International Marine Energy Journal, 2022, 5 (3)
doi: 10.26083/tuprints-00026558
Article, Secondary publication, Publisher's Version

Schmidt, J. Benedikt ; Hofmann, Julian ; Tenzer, Fabian M. ; Breitenbach, Jan ; Tropea, Cameron ; Roisman, Ilia V. (2024)
Thermosuperrepellency of a hot substrate caused by vapour percolation.
In: Communications Physics, 2021, 4 (1)
doi: 10.26083/tuprints-00023621
Article, Secondary publication, Publisher's Version

Dietrich, Maximilian ; Ling, Kunxiong ; Schmid, Roland ; Song, Zhao ; Beidl, Christian (2024)
Design and evaluation of an engine-in-the-loop environment for developing plug-in hybrid electric vehicle operating strategies at conventional test benches.
In: Automotive and Engine Technology, 2021, 6 (3-4)
doi: 10.26083/tuprints-00023556
Article, Secondary publication, Publisher's Version

Götzinger, Robert ; Hill, Maximillian ; Schabel, Samuel ; Schneider, Jens (2024)
Glass-paper-laminates: examination of manufacturing methods, properties and discussion of potentials.
In: Glass Structures & Engineering, 2021, 6 (1)
doi: 10.26083/tuprints-00023554
Article, Secondary publication, Publisher's Version

Khadke, Prashant ; Tichter, Tim ; Boettcher, Tim ; Muench, Falk ; Ensinger, Wolfgang ; Roth, Christina (2024)
A simple and effective method for the accurate extraction of kinetic parameters using differential Tafel plots.
In: Scientific Reports, 2021, 11 (1)
doi: 10.26083/tuprints-00023589
Article, Secondary publication, Publisher's Version

Kaltenbacher, Manfred ; Gschwentner, Andreas ; Kaltenbacher, Barbara ; Ulbrich, Stefan ; Reinbacher-Köstinger, Alice (2024)
Inverse Scheme to Locally Determine Nonlinear Magnetic Material Properties: Numerical Case Study.
In: Mathematics, 2024, 12 (10)
doi: 10.26083/tuprints-00027494
Article, Secondary publication, Publisher's Version

Askarizadeh, Hossein ; Pielsticker, Stefan ; Nicolai, Hendrik ; Kneer, Reinhold ; Hasse, Christian ; Maßmeyer, Anna (2024)
Investigation of the Coupling Schemes between the Discrete and the Continuous Phase in the Numerical Simulation of a 60 kWth Swirling Pulverised Solid Fuel Flame under Oxyfuel Conditions.
In: Fire, 2024, 7 (6)
doi: 10.26083/tuprints-00027496
Article, Secondary publication, Publisher's Version

Kilian, Nicklas ; Klausmann, Fabian ; Spieker, Daniel ; Schiffer, Heinz-Peter ; Gutiérrez Salas, Mauricio (2024)
Numerical Investigation of Forced Response in a Transonic Compressor Stage — Highlighting Challenges Using Experimental Validation.
In: International Journal of Turbomachinery, Propulsion and Power, 2024, 9 (2)
doi: 10.26083/tuprints-00027829
Article, Secondary publication, Publisher's Version

Bossler, Lukas Florian ; Rogalski, Timo ; Stanula, Patrick ; Lang, Enno ; Kohn, Oliver ; Metternich, Joachim ; Weigold, Matthias ; Krönung, Julia ; Buchwald, Arne (2024)
Pay-per-Stress – Belastungsorientierte Leasingmodelle im Maschinenbau.
In: Wirtschaftsinformatik & Management, 2021, 13 (6)
doi: 10.26083/tuprints-00023601
Article, Secondary publication, Publisher's Version

Knüppel, Finn ; Malchow, Sasha ; Sun, Ang ; Hussong, Jeanette ; Hartmann, Alexander ; Wurm, Frank-Hendrik ; Torner, Benjamin (2024)
Viscosity Modeling for Blood and Blood Analog Fluids in Narrow Gap and High Reynolds Numbers Flows.
In: Micromachines, 2024, 15 (6)
doi: 10.26083/tuprints-00027826
Article, Secondary publication, Publisher's Version

Becker-Dombrowsky, Florian Michael ; Kirchner, Eckhard (2024)
Electrical impedance based condition monitoring of machine elements – a systematic review.
In: Frontiers in Mechanical Engineering, 2024, 10
doi: 10.26083/tuprints-00027843
Article, Secondary publication, Publisher's Version

Vatter, J. M. ; Jung, B. ; Oechsner, M. (2024)
Electrochemical hydrogen permeation measurement during cyclic stress testing of a ferritic chromium steel.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2024, 55 (6)
doi: 10.26083/tuprints-00027690
Article, Secondary publication, Publisher's Version

Fritschen, Anna ; Lindner, Nils ; Scholpp, Sebastian ; Richthof, Philipp ; Dietz, Jonas ; Linke, Philipp ; Guttenberg, Zeno ; Blaeser, Andreas (2024)
High‐Scale 3D‐Bioprinting Platform for the Automated Production of Vascularized Organs‐on‐a‐Chip.
In: Advanced Healthcare Materials, 2024, 13 (17)
doi: 10.26083/tuprints-00027693
Article, Secondary publication, Publisher's Version

Deckenbach, Daniel ; Schneider, Jörg J. (2024)
Toward a Metal Anode‐Free Zinc‐Air Battery for Next‐Generation Energy Storage.
In: Small : nano micro, 2024, 20 (22)
doi: 10.26083/tuprints-00027692
Article, Secondary publication, Publisher's Version

Koetz, Florian ; Schmitt, Florian ; Kirchner, Eckhard ; Zancul, Eduardo (2024)
Visualising the lubrication condition in hydrodynamic journal bearings using impedance measurement.
In: Frontiers in Mechanical Engineering, 2024, 10
doi: 10.26083/tuprints-00028051
Article, Secondary publication, Publisher's Version

Stasica, Maximilian ; Honekamp, Celine ; Streiling, Kai ; Penacchio, Olivier ; Dam, Loes van ; Seyfarth, André (2024)
Walking on Virtual Surface Patterns Leads to Changed Control Strategies.
In: Sensors, 2024, 24 (16)
doi: 10.26083/tuprints-00028071
Article, Secondary publication, Publisher's Version

Samkhaniani, Nima ; Marschall, Holger ; Stroh, Alexander ; Frohnapfel, Bettina ; Wörner, Martin (2024)
Numerical simulation of drop impingement and bouncing on a heated hydrophobic surface.
In: Journal of Physics: Conference Series, 2021, 2116
doi: 10.26083/tuprints-00021351
Article, Secondary publication, Publisher's Version

Bulakh, Iryna (2024)
Sustainable Development in the Context of the Architecture of Environmental Friendly Medical Centers in Rural Areas (Case for Ukraine).
In: IOP Conference Series: Earth and Environmental Science, 2022, 1111
doi: 10.26083/tuprints-00023097
Article, Secondary publication, Publisher's Version

Zhang, Shuyue ; Wu, Jihao ; Jungblut, Jens ; Rinderknecht, Stephan (2024)
Vibration Control for the Flexible Rotor with Piezoelectric Bearings Based on the Mixed Sensitivity Robust Controller.
In: Journal of Physics: Conference Series, 2021, 1905
doi: 10.26083/tuprints-00021367
Article, Secondary publication, Publisher's Version

Sos, Marcel ; Tiphene, Gabrielle ; Loubet, Jean-Luc ; Bruns, Sebastian ; Bruder, Enrico ; Durst, Karsten (2024)
Mechanical softening of CuX alloys at elevated temperatures studied via high temperature scanning indentation.
In: Materials & Design, 2024, 240
doi: 10.26083/tuprints-00027666
Article, Secondary publication, Publisher's Version

Parmar, Devang ; Dehm, Simone ; Peyyety, Naga Anirudh ; Kumar, Sandeep ; Krupke, Ralph (2024)
Enhanced Broadband Photodetection with Geometry and Interface Engineered Nanocrystalline Graphite.
In: Advanced Sensor Research, 2024, 3 (2)
doi: 10.26083/tuprints-00027103
Article, Secondary publication, Publisher's Version

Hoche, Holger ; Ulrich, Thomas ; Kaestner, Peter ; Oechsner, Matthias (2024)
Empowering PVD for corrosion protection : TiMgGdN coatings with game‐changing corrosion performance: A genuine competitor to electroplated chromium.
In: Vakuum in Forschung und Praxis, 2024, 36 (2)
doi: 10.26083/tuprints-00027122
Article, Secondary publication, Publisher's Version

Blug, Andreas ; Conrad, Fabian ; Bertz, Alexander ; Kontermann, Christian ; Carl, Daniel ; Oechsner, Matthias (2024)
Application of high‐performance DIC for a comprehensive evaluation of biaxial fatigue crack growth experiments.
In: Strain : An International Journal for Experimental Mechanics, 2023, 59 (6)
doi: 10.26083/tuprints-00027173
Article, Secondary publication, Publisher's Version

Zhou, Li ; Yang, Jingtao ; Strampe, Tilman ; Klingauf, Uwe (2024)
Incremental nonlinear dynamic inversion based path‐following control for a hybrid quad‐plane unmanned aerial vehicle.
In: International Journal of Robust and Nonlinear Control, 2023, 33 (17)
doi: 10.26083/tuprints-00027178
Article, Secondary publication, Publisher's Version

Wester, T.T.B. ; Kampers, G. ; Gülker, G. ; Peinke, J. ; Cordes, U. ; Tropea, C. ; Hölling, M. (2024)
High speed PIV measurements of an adaptive camber airfoil under highly gusty inflow conditions.
In: Journal of Physics: Conference Series, 2018, 1037 (7)
doi: 10.26083/tuprints-00021062
Article, Secondary publication, Publisher's Version

Hol, J. ; Wiebenga, J.H. ; Hörning, M. ; Dietrich, F. ; Dane, C. (2024)
Advanced friction simulation of standardized friction tests: a numerical and experimental demonstrator.
In: Journal of Physics: Conference Series, 2016, 734 (3)
doi: 10.26083/tuprints-00020974
Article, Secondary publication, Publisher's Version

Schilling, Jakob Christian ; Mittelstedt, Christian (2024)
Approximate postbuckling analysis of shear deformable laminates.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (4)
doi: 10.26083/tuprints-00027195
Article, Secondary publication, Publisher's Version

Keszler, Monica ; Grosswendt, Felix ; Assmann, Anna-Caroline ; Krengel, Martin ; Maccari, Fernando ; Gutfleisch, Oliver ; Sebold, Doris ; Guillon, Olivier ; Weber, Sebastian ; Bram, Martin (2024)
Direct Recycling of Hot‐Deformed Nd–Fe–B Magnet Scrap by Field‐Assisted Sintering Technology.
In: Advanced Energy and Sustainability Research, 2024, 5 (1)
doi: 10.26083/tuprints-00027221
Article, Secondary publication, Publisher's Version

Humbert, Angelika ; Gross, Dietmar ; Sondershaus, Rabea ; Müller, Ralf ; Steeb, Holger ; Braun, Matthias ; Brauchle, Jörg ; Stebner, Karsten ; Rückamp, Martin (2024)
Fractures in glaciers — Crack tips and their stress fields by observation and modeling.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (3)
doi: 10.26083/tuprints-00027197
Article, Secondary publication, Publisher's Version

Reichel, Maximilian ; Groche, Peter ; Gutfleisch, Oliver ; Schröder, Jörg (2024)
Impact of soft magnetic α‐Fe in hard Nd₂Fe₁₄B magnetic materials: A micromagnetic study.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027212
Article, Secondary publication, Publisher's Version

Schreiber, Philip ; Mittelstedt, Christian (2024)
Lévy‐type solutions for buckling of shear deformable unsymmetrically laminated plates with rotational restraints.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (3)
doi: 10.26083/tuprints-00027209
Article, Secondary publication, Publisher's Version

Fang, Xufei (2024)
Mechanical tailoring of dislocations in ceramics at room temperature: A perspective.
In: Journal of the American Ceramic Society, 2024, 107 (3)
doi: 10.26083/tuprints-00027189
Article, Secondary publication, Publisher's Version

Kunz, Jana ; Rutz, Xenia ; Stephan, Simon ; Hasse, Hans ; Müller, Ralf (2024)
Simulation of vibrating droplets using a phase field approach.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027210
Article, Secondary publication, Publisher's Version

Zhao, Tian ; Schneider‐Jung, Fabio ; Linn, Joachim ; Müller, Ralf (2024)
Towards realistic nonlinear elastic bending behavior for cable simulation.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (4)
doi: 10.26083/tuprints-00027194
Article, Secondary publication, Publisher's Version

Sajadifar, Seyed Vahid ; Baumgartner, Jörg ; Krochmal, Marcel ; Maciolek, Andreas ; Klein, Marcus ; Rößer, Moritz ; Graß, Markus ; Fröck, Hannes ; Fehlbier, Martin ; Kessler, Olaf ; Böhm, Stefan ; Oechsner, Matthias ; Melz, Tobias ; Niendorf, Thomas (2024)
On the Monotonic and Cyclic Behavior of an Al‐Mg‐Zn‐Cu‐Si Compositionally Complex Alloy.
In: Advanced Engineering Materials, 2023, 25 (21)
doi: 10.26083/tuprints-00027253
Article, Secondary publication, Publisher's Version

Zambotti, Andrea ; Qu, Fangmu ; Costa, Giacomo ; Graczyk-Zajac, Magdalena ; Sorarù, Gian Domenico (2024)
Polymer‐Derived Ceramic Aerogels to Immobilize Sulfur for Li‐S Batteries.
In: Energy Technology : Generation, Conversion, Storage, Distribution, 2023, 11 (12)
doi: 10.26083/tuprints-00027234
Article, Secondary publication, Publisher's Version

Aghel, Babak ; Alobaid, Falah ; Graf, Christoph ; Epple, Bernd (2024)
Efficiency Analysis of the Discrete Element Method Model in Gas‐Fluidized Beds.
In: Chemical Engineering & Technology, 2024, 47 (1)
doi: 10.26083/tuprints-00027243
Article, Secondary publication, Publisher's Version

Fach, Christian ; Rödel, Nico ; Schorr, Jürgen ; Krüger, Christian ; Dreizler, Andreas ; Böhm, Benjamin (2024)
Investigation of in-cylinder soot formation in a DISI engine during transient operation by simultaneous endoscopic PIV and flame imaging.
In: International Journal of Engine Research, 2022, 24 (3)
doi: 10.26083/tuprints-00023255
Article, Secondary publication, Publisher's Version

Hanuschkin, Alexander ; Schober, Steffen ; Bode, Johannes ; Schorr, Jürgen ; Böhm, Benjamin ; Krüger, Christian ; Peters, Steven (2024)
Machine learning–based analysis of in-cylinder flow fields to predict combustion engine performance.
In: International Journal of Engine Research, 2021, 22 (1)
doi: 10.26083/tuprints-00016051
Article, Secondary publication, Publisher's Version

Pati, Andrea ; Paredi, Davide ; Welch, Cooper ; Schmidt, Marius ; Geschwindner, Christopher ; Böhm, Benjamin ; Lucchini, Tommaso ; D’Errico, Gianluca ; Hasse, Christian (2024)
Numerical and experimental investigations of the early injection process of Spray G in a constant volume chamber and an optically accessible DISI engine.
In: International Journal of Engine Research, 2022, 23 (12)
doi: 10.26083/tuprints-00022554
Article, Secondary publication, Publisher's Version

Kircher, Magnus ; Meindl, Emmeram ; Hasse, Christian (2024)
Numerical and experimental study on knocking combustion in turbocharged direct-injection engines for a wide range of operating conditions.
In: International Journal of Engine Research, 2023, 24 (2)
doi: 10.26083/tuprints-00023174
Article, Secondary publication, Publisher's Version

Maliha, Malki ; Stumpf, Bastian ; Beyer, Felix ; Kühnert, Marius ; Kubach, Heiko ; Roisman, Ilia ; Hussong, Jeanette ; Koch, Thomas (2024)
Optical investigation on the interaction between a fuel-spray and an oil wetted wall with the focus on secondary droplets.
In: International Journal of Engine Research, 2022, 24 (4)
doi: 10.26083/tuprints-00023666
Article, Secondary publication, Publisher's Version

Kumar, Anuruddh ; Kumar, Sidhant ; Patel, Satyanarayan ; Sharma, Moolchand ; Azad, Puneet ; Vaish, Rahul ; Kumar, Rajeev ; Srikanth, KS (2024)
Pyroelectric energy conversion using Ba₀.₈₅Sr₀.₁₅Zr₀.₁Ti₀.₉O₃ ceramics and its cement-based composites.
In: Journal of Intelligent Material Systems and Structures, 2019, 30 (6)
doi: 10.26083/tuprints-00016988
Article, Secondary publication, Publisher's Version

Welch, Cooper ; Schmidt, Marius ; Geschwindner, Christopher ; Wu, Shengqi ; Wooldridge, Margaret S. ; Böhm, Benjamin (2024)
The influence of in-cylinder flows and bulk gas density on early Spray G injection in an optical research engine.
In: International Journal of Engine Research, 2023, 24 (1)
doi: 10.26083/tuprints-00023015
Article, Secondary publication, Publisher's Version

Kirchner, Eckhard ; Bartz, Marcel ; Becker-Dombrowsky, Florian (2024)
Behavior of Lubricated Bearings in Electric Circuits.
In: Lubricants, 2024, 12 (3)
doi: 10.26083/tuprints-00027127
Article, Secondary publication, Publisher's Version

Silva, Alessandro Brugnera ; Murcia, Marc ; Mohseni, Omid ; Takahashi, Ryu ; Forner-Cordero, Arturo ; Seyfarth, Andre ; Hosoda, Koh ; Sharbafi, Maziar Ahmad (2024)
Design of Low-Cost Modular Bio-Inspired Electric–Pneumatic Actuator (EPA)-Driven Legged Robots.
In: Biomimetics, 2024, 9 (3)
doi: 10.26083/tuprints-00027138
Article, Secondary publication, Publisher's Version

Frick, Nicholas ; Terwolbeck, Jan ; Seibel, Benjamin ; Metternich, Joachim (2024)
Design Model for the Digital Shadow of a Value Stream.
In: Systems, 2024, 12 (1)
doi: 10.26083/tuprints-00027165
Article, Secondary publication, Publisher's Version

Haeckel, Tobias ; Paul, Dominik ; Leichtfuß, Sebastian ; Schiffer, Heinz-Peter ; Eißler, Werner (2024)
Determination of a Numerical Surge Limit by Means of an Enhanced Greitzer Compressor Model.
In: International Journal of Turbomachinery, Propulsion and Power, 2023, 8 (4)
doi: 10.26083/tuprints-00027183
Article, Secondary publication, Publisher's Version

Spielmann, Jonas ; Braig, Daniel ; Streck, Antonia ; Gustmann, Tobias ; Kuhn, Carola ; Reinauer, Felix ; Kurnosov, Alexandr ; Leubner, Oliver ; Potapkin, Vasily ; Hasse, Christian ; Deutschmann, Olaf ; Etzold, Bastian J. M. ; Scholtissek, Arne ; Kramm, Ulrike I. (2024)
Exploring the oxidation behavior of undiluted and diluted iron particles for energy storage: Mössbauer spectroscopic analysis and kinetic modeling.
In: Physical Chemistry Chemical Physics, 2024, 26 (17)
doi: 10.26083/tuprints-00027310
Article, Secondary publication, Publisher's Version

Fett, Michel ; Wilking, Fabian ; Goetz, Stefan ; Kirchner, Eckhard ; Wartzack, Sandro (2024)
A Literature Review on the Development and Creation of Digital Twins, Cyber-Physical Systems, and Product-Service Systems.
In: Sensors, 2023, 23 (24)
doi: 10.26083/tuprints-00027168
Article, Secondary publication, Publisher's Version

Georges, Hussam ; García Solera, Diego ; Aguilar Borasteros, Carlos ; Metar, Mohmad ; Song, Gyeongseob ; Mandava, Rahul ; Becker, Wilfried ; Mittelstedt, Christian (2024)
Mechanical Performance Comparison of Sandwich Panels with Graded Lattice and Honeycomb Cores.
In: Biomimetics, 2024, 9 (2)
doi: 10.26083/tuprints-00027163
Article, Secondary publication, Publisher's Version

Fett, Michel ; Kraft, Marcel ; Wilking, Fabian ; Goetz, Stefan ; Wartzack, Sandro ; Kirchner, Eckhard (2024)
Medium-Level Architectures for Digital Twins: Bridging Conceptual Reference Architectures to Practical Implementation in Cloud, Edge and Cloud–Edge Deployments.
In: Electronics, 2024, 13 (7)
doi: 10.26083/tuprints-00027333
Article, Secondary publication, Publisher's Version

Hausmann, Maximilian ; Schirra, Tobias ; Kirchner, Eckhard (2024)
Analysis of the Electrical Impedance of Graphite and Silver Graphite Carbon Brushes for Use in the Impedance Measurement of Sensory Utilizable Machine Elements.
In: Machines, 2023, 11 (11)
doi: 10.26083/tuprints-00027207
Article, Secondary publication, Publisher's Version

Puchtler, Steffen ; Maier, Robert ; Kuhn, Martin ; Burkhardt, Yves (2024)
The Influence of Load and Speed on the Initial Breakdown of Rolling Bearings Exposed to Electrical Currents.
In: Lubricants, 2023, 12 (1)
doi: 10.26083/tuprints-00027208
Article, Secondary publication, Publisher's Version

Fischer, A. ; Lutz, T. ; Krämer, E. ; Cordes, U. ; Hufnagel, K. ; Tropea, C. ; Kampers, G. ; Hölling, M. ; Peinke, J. (2024)
Numerical and experimental investigation of an airfoil with load control in the wake of an active grid.
In: Journal of Physics: Conference Series, 2016, 753 (2)
Article, Secondary publication, Publisher's Version

Kramat, Janice ; Kraus, Leon ; Gunawan, Vincent J. ; Smyej, Elias ; Froehlich, Philipp ; Weber, Tim E. ; Spiehl, Dieter ; Koeppl, Heinz ; Blaeser, Andreas ; Suess, Beatrix (2024)
Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor.
In: Biosensors, 2024, 14 (1)
doi: 10.26083/tuprints-00027255
Article, Secondary publication, Publisher's Version

Wacławczyk, M. ; Oberlack, M. (2024)
Symmetry analysis and invariant solutions of the multipoint infinite systems describing turbulence.
In: Journal of Physics: Conference Series, 2016, 760 (1)
doi: 10.26083/tuprints-00020877
Article, Secondary publication, Publisher's Version

Hasan, Lamyaa Khaleel ; Jiaad, Suaad Makki ; Salman, Khansaa Dawood ; Al-Maliki, Wisam Abed Kattea ; Alobaid, Falah ; Epple, Bernd (2024)
Wear Characteristics of (Al/B₄C and Al/TiC) Nanocomposites Synthesized via Powder Metallurgy Method.
In: Applied Sciences, 2023, 13 (23)
doi: 10.26083/tuprints-00027218
Article, Secondary publication, Publisher's Version

Keller, Thimo ; Behling, Magnus ; Stockinger, Christopher ; Metternich, Joachim ; Schützer, Klaus (2024)
Analysis of the influence of process complexity and employee competence on the effect of digital assistance in industrial assembly.
In: Production Engineering : Research and Development, 2021, 15 (1)
doi: 10.26083/tuprints-00023950
Article, Secondary publication, Publisher's Version

Ghillani, Noemi ; Heinz, Michael ; Gambaryan-Roisman, Tatiana (2024)
Capillary rise and evaporation of a liquid in a corner between a plane and a cylinder: A model of imbibition into a nanofiber mat coating.
In: The European Physical Journal Special Topics, 2020, 229 (10)
doi: 10.26083/tuprints-00023989
Article, Secondary publication, Publisher's Version

Prochazka, F. ; Krüger, S. ; Stomberg, G. ; Bauer, M. (2024)
Development of a hardware-in-the-loop demonstrator for the validation of fault-tolerant control methods for a hybrid UAV.
In: CEAS Aeronautical Journal, 2021, 12 (3)
doi: 10.26083/tuprints-00023507
Article, Secondary publication, Publisher's Version

Schork, Stefan ; Güttinger, Kai ; Kirchner, Eckhard (2024)
Eigenschaftsanalyse zur Entwicklung additiv gefertigter Prototypen – Das House of Properties.
In: Forschung im Ingenieurwesen = Engineering Research, 2020, 84 (4)
doi: 10.26083/tuprints-00023917
Article, Secondary publication, Publisher's Version

Kempf, Andreas ; Klein, Marcus ; Oechsner, Matthias (2024)
Ermittlung der Grenzflächenpressung von Bauteilwerkstoffen in Schraubenverbindungen an Ringproben bei erhöhter Temperatur bis 300 °C.
In: Forschung im Ingenieurwesen = Engineering Research, 2020, 84 (4)
doi: 10.26083/tuprints-00023916
Article, Secondary publication, Publisher's Version

Baumann, S. ; Neidhardt, T. ; Klingauf, U. (2024)
Evaluation of the aircraft fuel economy using advanced statistics and machine learning.
In: CEAS Aeronautical Journal, 2021, 12 (3)
doi: 10.26083/tuprints-00023508
Article, Secondary publication, Publisher's Version

Baier, Tobias ; Hardt, Steffen (2024)
Gas separation in a Knudsen pump inspired by a Crookes radiometer.
In: Microfluidics and Nanofluidics, 2020, 24 (6)
doi: 10.26083/tuprints-00023927
Article, Secondary publication, Publisher's Version

Wassenberg, J. ; Stephan, P. ; Gambaryan-Roisman, T. (2024)
Heat transfer during pulsating liquid jet impingement onto a vertical wall.
In: Heat and Mass Transfer = Wärme- und Stoffübertragung, 2021, 57 (4)
doi: 10.26083/tuprints-00023904
Article, Secondary publication, Publisher's Version

Hähn, Felix ; Weigold, Matthias (2024)
Hybrid compliance compensation for path accuracy enhancement in robot machining.
In: Production Engineering : Research and Development, 2020, 14 (4)
doi: 10.26083/tuprints-00023949
Article, Secondary publication, Publisher's Version

Gally, Tristan ; Groche, Peter ; Hoppe, Florian ; Kuttich, Anja ; Matei, Alexander ; Pfetsch, Marc E. ; Rakowitsch, Martin ; Ulbrich, Stefan (2024)
Identification of model uncertainty via optimal design of experiments applied to a mechanical press.
In: Optimization and Engineering : International Multidisciplinary Journal to Promote Optimization Theory & Applications in Engineering Sciences, 2022, 23 (1)
doi: 10.26083/tuprints-00023488
Article, Secondary publication, Publisher's Version

Al-Baradoni, Nassr ; Krech, Martin ; Groche, Peter (2024)
In-process calibration of smart structures produced by incremental forming.
In: Production Engineering : Research and Development, 2021, 15 (1)
doi: 10.26083/tuprints-00023951
Article, Secondary publication, Publisher's Version

Kissing, Johannes ; Kriegseis, Jochen ; Li, Zhenyao ; Feng, Lihao ; Hussong, Jeanette ; Tropea, Cameron (2024)
Insights into leading edge vortex formation and detachment on a pitching and plunging flat plate.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (9)
doi: 10.26083/tuprints-00023907
Article, Secondary publication, Publisher's Version

Holzmann, H. ; Weber, M. ; Park, Y. J. ; Perfetto, S. ; Atzrodt, H. ; Dafnis, A. (2024)
Investigation of biogenic materials and ferroelectrets for energy harvesting on vibrating aircraft structures.
In: CEAS Aeronautical Journal, 2021, 12 (2)
doi: 10.26083/tuprints-00023509
Article, Secondary publication, Publisher's Version

Bretz, Andreas ; Abele, Eberhard ; Weigold, Matthias (2024)
Measuring the bore straightness during reaming with sensoric tools.
In: Production Engineering : Research and Development, 2020, 14 (4)
doi: 10.26083/tuprints-00023952
Article, Secondary publication, Publisher's Version

Fügenschuh, Armin ; Lorenz, Ulf ; Pelz, Peter F. (2024)
OPTE special issue on technical operations research (TOR).
In: Optimization and Engineering, 2021, 22 (2)
doi: 10.26083/tuprints-00023487
Article, Secondary publication, Publisher's Version

Blahout, Sebastian ; Reinecke, Simon R. ; Tabaei Kazerooni, Hamid ; Kruggel-Emden, Harald ; Hussong, Jeanette (2024)
On the 3D distribution and size fractionation of microparticles in a serpentine microchannel.
In: Microfluidics and Nanofluidics, 2020, 24 (3)
doi: 10.26083/tuprints-00023926
Article, Secondary publication, Publisher's Version

Bechtel, Simon ; Bayer, Brian ; Vidaković-Koch, Tanja ; Wiser, Artur ; Vogel, Herbert ; Sundmacher, Kai (2024)
Precise determination of LJ parameters and Eucken correction factors for a more accurate modeling of transport properties in gases.
In: Heat and Mass Transfer = Wärme- und Stoffübertragung, 2020, 56 (8)
doi: 10.26083/tuprints-00023905
Article, Secondary publication, Publisher's Version

Greifenstein, M. ; Heinze, J. ; Willert, C. ; Voigt, L. ; Zedda, M. ; Richter, C. ; Dreizler, A. (2024)
Time-resolved temperature profile measurements in the exhaust of a single sector gas turbine combustor at realistic operating conditions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (8)
doi: 10.26083/tuprints-00023903
Article, Secondary publication, Publisher's Version

Schork, B. ; Zerbst, Uwe ; Kiyak, Y. ; Kaffenberger, M. ; Madia, M. ; Oechsner, M. (2024)
Effect of the parameters of weld toe geometry on the FAT class as obtained by means of fracture mechanics-based simulations.
In: Welding in the World : The International Journal of Materials Joining, 2020, 64 (6)
doi: 10.26083/tuprints-00024006
Article, Secondary publication, Publisher's Version

Seiler, Patrick M. ; Roisman, Ilia V. ; Tropea, Cameron (2024)
Interaction between an aerodynamically driven, wall-bound drop and a single groove.
In: The European Physical Journal Special Topics, 2020, 229 (10)
doi: 10.26083/tuprints-00023992
Article, Secondary publication, Publisher's Version

Bauer, Andreas ; Bopp, Maximilian ; Jakirlic, Suad ; Tropea, Cameron ; Krafft, Axel Joachim ; Shokina, Nina ; Hennig, Jürgen (2024)
Analysis of the wall shear stress in a generic aneurysm under pulsating and transitional flow conditions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (2)
doi: 10.26083/tuprints-00023899
Article, Secondary publication, Publisher's Version

Steinhausen, Christoph ; Gerber, Valerie ; Preusche, Andreas ; Weigand, Bernhard ; Dreizler, Andreas ; Lamanna, Grazia (2024)
On the potential and challenges of laser-induced thermal acoustics for experimental investigation of macroscopic fluid phenomena.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2021, 62 (1)
doi: 10.26083/tuprints-00023901
Article, Secondary publication, Publisher's Version

Brockmann, Philipp ; Kazerooni, Hamid Tabaei ; Brandt, Luca ; Hussong, Jeanette (2024)
Utilizing the ball lens effect for astigmatism particle tracking velocimetry.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (2)
doi: 10.26083/tuprints-00023900
Article, Secondary publication, Publisher's Version

Steinebach, Tim ; Wakula, Jurij ; Bruder, Ralph ; Paulke, Maximilian (2024)
Entwicklung einer ergonomischen Lagerplatzvergabe in der manuellen Person-zur-Ware Kommissionierung.
In: Zeitschrift für Arbeitswissenschaft, 2021, 75 (3)
doi: 10.26083/tuprints-00023560
Article, Secondary publication, Publisher's Version

Jaeger, Fabian ; Franceschi, Alessandro ; Hoche, Holger ; Groche, Peter ; Oechsner, Matthias (2024)
Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023468
Article, Secondary publication, Publisher's Version

Müller, Andreas Lars ; Abendroth, Bettina (2024)
Übernahmeaufforderungen beim hochautomatisierten Fahren mit fahrfremden Tätigkeiten – welche Modalitäten sind geeignet?
In: Zeitschrift für Arbeitswissenschaft, 2022, 76 (3)
doi: 10.26083/tuprints-00023561
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Schroeder, Julius ; Groche, Peter (2024)
Roll forming of a high strength AA7075 aluminum tube.
In: Production Engineering : Research and Development, 2021, 15 (3-4)
doi: 10.26083/tuprints-00023537
Article, Secondary publication, Publisher's Version

Demel, Daniel ; Schütz, Thomas ; Kölzer, Christian ; Tropea, Cameron (2024)
Anwendungen für Mehrphasen-CFD am Fahrzeugexterieur.
In: Forschung im Ingenieurwesen = Engineering Research, 2021, 85 (2)
doi: 10.26083/tuprints-00023473
Article, Secondary publication, Publisher's Version

Zhou, Xiandong ; Reimuth, Christoph ; Stein, Peter ; Xu, Bai-Xiang (2024)
Driving forces on dislocations: finite element analysis in the context of the non-singular dislocation theory.
In: Archive of Applied Mechanics, 2021, 91 (11)
doi: 10.26083/tuprints-00023469
Article, Secondary publication, Publisher's Version

Brockmann, Philipp ; Hussong, Jeanette (2024)
On the calibration of Astigmatism particle tracking velocimetry for suspensions of different volume fractions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2021, 62 (1)
doi: 10.26083/tuprints-00023464
Article, Secondary publication, Publisher's Version

Jasper, Sarah ; Hussong, Jeanette ; Lindken, Ralph (2024)
PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2021, 62 (5)
doi: 10.26083/tuprints-00023465
Article, Secondary publication, Publisher's Version

Pratomo, Hariyo P S ; Bremhorst, Klaus (2024)
Radial profile of moments of instantaneous axial velocity of a fully pulsed axisymmetric jet.
In: Journal of Physics: Conference Series, 2014, 495 (1)
doi: 10.26083/tuprints-00020744
Article, Secondary publication, Publisher's Version

Hornung, Daniel ; Spreckelsen, Florian ; Weiß, Thomas (2024)
Agile Research Data Management with Open Source: LinkAhead.
In: ing.grid : FAIR data management in engineering sciences, 2024, 1 (2)
doi: 10.26083/tuprints-00026927
Article, Secondary publication, Publisher's Version

Brunk, Aaron ; Dünweg, Burkhard ; Egger, Herbert ; Habrich, Oliver ; Lukáčová-Medvid'ová, Mária ; Spiller, Dominic (2024)
Analysis of a viscoelastic phase separation model.
In: Journal of Physics: Condensed Matter, 2021, 33 (23)
doi: 10.26083/tuprints-00020427
Article, Secondary publication, Publisher's Version

Silva Pimenta, Izadora (2024)
Critically thinking about the reusability of (meta)data.
In: ing.grid : FAIR data management in engineering sciences, 2024, 2 (1)
doi: 10.26083/tuprints-00026929
Article, Secondary publication, Publisher's Version

Diercks, Philipp ; Gläser, Dennis ; Lünsdorf, Ontje ; Selzer, Michael ; Flemisch, Bernd ; Unger, Jörg F. (2024)
Evaluation of tools for describing, reproducing and reusing scientific workflows.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (1)
doi: 10.26083/tuprints-00026406
Article, Secondary publication, Publisher's Version

Schnur, Christopher ; Dorst, Tanja ; Deshmukh, Kapil ; Zimmer, Sarah ; Litzenburger, Philipp ; Schneider, Tizian ; Margies, Lennard ; Müller, Rainer ; Schütze, Andreas (2024)
PIA - A Concept for a Personal Information Assistant for Data Analysis and Machine Learning of Time-Continuous Data in Industrial Applications.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (2)
doi: 10.26083/tuprints-00026427
Article, Secondary publication, Publisher's Version

Gehring, Petra (2024)
Sharing Data - Is It All About An "Openness" Economy?
In: ing.grid : FAIR data management in engineering sciences, 2024, 2 (1)
doi: 10.26083/tuprints-00026928
Article, Secondary publication, Publisher's Version

Ferenz, Stephan ; Nieße, Astrid (2024)
Towards Improved Findability of Energy Research Software by Introducing a Metadata-based Registry.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (2)
doi: 10.26083/tuprints-00026428
Article, Secondary publication, Publisher's Version

Gloerfeld, Mark ; Roisman, Ilia V. ; Hussong, Jeanette ; Tropea, Cameron (2024)
Measurements and modelling of the residual mass upon impact of supercooled liquid drops.
In: Experiments in Fluids, 2021, 62 (10)
doi: 10.26083/tuprints-00023461
Article, Secondary publication, Publisher's Version

Blahout, Sebastian ; Reinecke, Simon R. ; Kruggel-Emden, Harald ; Hussong, Jeanette (2024)
On the micro-PIV accuracy and reliability utilizing non-Gaussian particle images.
In: Experiments in Fluids, 2021, 62 (9)
doi: 10.26083/tuprints-00023462
Article, Secondary publication, Publisher's Version

Deyn, Lars H. von ; Schmidt, Marius ; Örlü, Ramis ; Stroh, Alexander ; Kriegseis, Jochen ; Böhm, Benjamin ; Frohnapfel, Bettina (2024)
Ridge-type roughness: from turbulent channel flow to internal combustion engine.
In: Experiments in Fluids, 2022, 63 (1)
doi: 10.26083/tuprints-00023460
Article, Secondary publication, Publisher's Version

Eberhard, A. ; Stähler, M. ; Beyer, S. ; Klein, M. ; Oechsner, M. (2024)
Temperaturabhängiges Anzieh- und Löseverhalten von Schraubenverbindungen mit Zinklamellenüberzügen.
In: Forschung im Ingenieurwesen = Engineering Research, 2021, 85 (2)
doi: 10.26083/tuprints-00023450
Article, Secondary publication, Publisher's Version

Blohm, Annika ; Kumar, Swatantar ; Knebl, Andreas ; Herrmann, Martina ; Küsel, Kirsten ; Popp, Jürgen ; Frosch, Torsten (2024)
Activity and electron donor preference of two denitrifying bacterial strains identified by Raman gas spectroscopy.
In: Analytical and Bioanalytical Chemistry, 2022, 414 (1)
doi: 10.26083/tuprints-00023436
Article, Secondary publication, Publisher's Version

Meyer-Coors, Michael ; Kienzler, Reinhold ; Schneider, Patrick (2024)
Modularity of the displacement coefficients and complete plate theories in the framework of the consistent-approximation approach.
In: Continuum Mechanics and Thermodynamics, 2021, 33 (4)
doi: 10.26083/tuprints-00023441
Article, Secondary publication, Publisher's Version

Franceschi, A. ; Stahl, J. ; Kock, C. ; Selbmann, R. ; Ortmann-Ishkina, S. ; Jobst, A. ; Merklein, M. ; Kuhfuß, B. ; Bergmann, M. ; Behrens, B.-A. ; Volk, W. ; Groche, P. (2024)
Strategies for residual stress adjustment in bulk metal forming.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023446
Article, Secondary publication, Publisher's Version

Johann, Felix ; Becker, David ; Becker, Matthias ; Hoss, Matthias ; Löwer, Alexander ; Förste, Christoph (2024)
The influence of the Earth's magnetic field on strapdown inertial gravimetry using Q-Flex accelerometers: static and dynamic experiments.
In: Journal of Geodesy, 2021, 95 (9)
doi: 10.26083/tuprints-00023440
Article, Secondary publication, Publisher's Version

Endo, Satoshi ; Fröhner, Jakob ; Musić, Selma ; Hirche, Sandra ; Beckerle, Philipp (2024)
Effect of External Force on Agency in Physical Human-Machine Interaction.
In: Frontiers in Human Neuroscience, 2020, 14
doi: 10.26083/tuprints-00016633
Article, Secondary publication, Publisher's Version

Ege Cansev, Mehmet ; Nordheimer, Daniel ; Kirchner, Elsa Andrea ; Beckerle, Philipp (2024)
Feel-Good Requirements: Neurophysiological and Psychological Design Criteria of Affective Touch for (Assistive) Robots.
In: Frontiers in Neurorobotics, 2021, 15
doi: 10.26083/tuprints-00019567
Article, Secondary publication, Publisher's Version

Thaler, Anne ; Piryankova, Ivelina ; Stefanucci, Jeanine K. ; Pujades, Sergi ; Rosa, Stephan de la ; Streuber, Stephan ; Romero, Javier ; Black, Michael J. ; Mohler, Betty J. (2024)
Visual Perception and Evaluation of Photo-Realistic Self-Avatars From 3D Body Scans in Males and Females.
In: Frontiers in ICT, 2018, 5
doi: 10.26083/tuprints-00016777
Article, Secondary publication, Publisher's Version

Triller, J. ; Immel, R. ; Timmer, A. ; Harzheim, L. (2024)
The difference-based equivalent static load method: an improvement of the ESL method’s nonlinear approximation quality.
In: Structural and Multidisciplinary Optimization, 2021, 63 (6)
doi: 10.26083/tuprints-00023434
Article, Secondary publication, Publisher's Version

Torricelli, Diego ; Rodriguez-Guerrero, Carlos ; Veneman, Jan F. ; Crea, Simona ; Briem, Kristin ; Lenggenhager, Bigna ; Beckerle, Philipp (2024)
Benchmarking Wearable Robots: Challenges and Recommendations From Functional, User Experience, and Methodological Perspectives.
In: Frontiers in Robotics and AI, 2020, 7
doi: 10.26083/tuprints-00016183
Article, Secondary publication, Publisher's Version

Roussanaly, Simon ; Ouassou, Jabir A. ; Anantharaman, Rahul ; Haaf, Martin (2024)
Impact of Uncertainties on the Design and Cost of CCS From a Waste-to-Energy Plant.
In: Frontiers in Energy Research, 2020, 8
doi: 10.26083/tuprints-00016112
Article, Secondary publication, Publisher's Version

Gampert, Markus ; Goebbert, Jens Henrik ; Schaefer, Philip ; Gauding, Michael ; Peters, Norbert ; Aldudak, Fettah ; Oberlack, Martin (2024)
Extensive strain along gradient trajectories in the turbulent kinetic energy field.
In: New Journal of Physics, 2011, 13 (4)
doi: 10.26083/tuprints-00020563
Article, Secondary publication, Publisher's Version

Birk, Frederik ; Ali, Fares ; Weigold, Matthias ; Abele, Eberhard ; Schützer, Klaus (2024)
Lightweight hybrid CFRP design for machine tools with focus on simple manufacturing.
In: The International Journal of Advanced Manufacturing Technology, 2020, 108 (11-12)
doi: 10.26083/tuprints-00023868
Article, Secondary publication, Publisher's Version

Kott, Matthäus ; Echler, Daniel ; Groche, Peter (2024)
Methodological approach for the development of an operator assistance system for the press shop.
In: The International Journal of Advanced Manufacturing Technology, 2022, 119 (3-4)
doi: 10.26083/tuprints-00023457
Article, Secondary publication, Publisher's Version

Schürmann, Tim ; Beckerle, Philipp (2024)
Personalizing Human-Agent Interaction Through Cognitive Models.
In: Frontiers in Psychology, 2020, 11
doi: 10.26083/tuprints-00015957
Article, Secondary publication, Publisher's Version

Moneke, Matthias ; Groche, Peter (2024)
The origin of end flare in roll formed profiles.
In: International Journal of Material Forming, 2021, 14 (6)
doi: 10.26083/tuprints-00023547
Article, Secondary publication, Publisher's Version

Suzuki, Issei ; Lin, Zexin ; Nogami, Taichi ; Kawanishi, Sakiko ; Huang, Binxiang ; Klein, Andreas ; Omata, Takahisa (2024)
High open-circuit voltage in single-crystalline n-type SnS/MoO₃ photovoltaics.
In: APL Materials, 2023, 11 (3)
doi: 10.26083/tuprints-00026512
Article, Secondary publication, Publisher's Version

Shojaee, Mohammad ; Valizadeh, Iman ; Klein, Dominik K. ; Sharifi, P. ; Weeger, Oliver (2024)
Multiscale modeling of functionally graded shell lattice metamaterials for additive manufacturing.
In: Engineering with Computers, 2023
doi: 10.26083/tuprints-00026475
Article, Secondary publication, Publisher's Version

Bobzin, K. ; Wietheger, W. ; Heinemann, H. ; Schulz, M. ; Oechsner, M. ; Engler, T. ; Scheerer, H. ; Joung, Y. (2024)
Thermisch gespritzte Beschichtungen für den Armaturenbau.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (9)
doi: 10.26083/tuprints-00020998
Article, Secondary publication, Publisher's Version

Bütev Öcal, Ezgi ; Sajadifar, Seyed Vahid ; Sellner, Erik P. K. ; Vollmer, Malte ; Heidarzadeh, Akbar ; Zavašnik, Janez ; Niendorf, Thomas ; Groche, Peter (2024)
Functionally Graded AA7075 Components Produced via Hot Stamping: A Novel Process Design Inspired from Analysis of Microstructure and Mechanical Properties.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024683
Article, Secondary publication, Publisher's Version

Kraemer, A.‐K. ; Klein, M. ; Oechsner, M. ; Grote, J. ; Ungermann, D. (2024)
Geschraubte, gleitfest vorgespannte Verbindungen an feuerverzinkten Brückenbauteilen unter zyklischen Beanspruchungen.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024668
Article, Secondary publication, Publisher's Version

Lehrich, Luca ; Adiche, Chafika (2024)
Process Intensification for the Recovery of Hydrogen Cyanide in the Andrussow Process.
In: Chemie Ingenieur Technik, 2023, 95 (10)
doi: 10.26083/tuprints-00024671
Article, Secondary publication, Publisher's Version

Niwinski, T. J. ; Kraemer, F. ; Klein, M. ; Oechsner, M. ; Herter, S. ; Becker, M. M. (2024)
Ultraschallbasierte in situ Vorspannkraftermittlung an Schrauben ohne Referenzmessung im nicht verspannten Zustand durch Kombination von Longitudinal‐ und Transversalwellen.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024670
Article, Secondary publication, Publisher's Version

Oberlack, Martin ; Rosteck, Andreas (2024)
Applications of the new symmetries of the multi-point correlation equations.
In: Journal of Physics: Conference Series, 2011, 318 (4)
doi: 10.26083/tuprints-00020770
Article, Secondary publication, Publisher's Version

Khujadze, George ; Nguyen van Yen, Romain ; Schneider, Kai ; Oberlack, Martin ; Farge, Marie (2024)
Coherent vorticity extraction in turbulent boundary layers using orthogonal wavelets.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020768
Article, Secondary publication, Publisher's Version

Gampert, Markus ; Goebbert, Jens Henrik ; Schaefer, Philip ; Gauding, Michael ; Peters, Norbert ; Aldudak, Fettah ; Oberlack, Martin (2024)
Compressive and extensive strain along gradient trajectories.
In: Journal of Physics: Conference Series, 2011, 318 (5)
doi: 10.26083/tuprints-00020772
Article, Secondary publication, Publisher's Version

Hasegawa, Yosuke ; Frohnapfel, Bettina ; Kasagi, Nobuhide (2024)
Effects of spatially varying slip length on friction drag reduction in wall turbulence.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020769
Article, Secondary publication, Publisher's Version

Fischer, S. ; Slomski, E. M. ; Stephan, P. ; Oechsner, M. (2024)
Enhancement of nucleate boiling heat transfer by micro-structured chromium nitride surfaces.
In: Journal of Physics: Conference Series, 2012, 395 (1)
doi: 10.26083/tuprints-00020792
Article, Secondary publication, Publisher's Version

Budakli, Mete ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2024)
Influence of Surface Topography on Heat Transfer in Shear-Driven Liquid Films.
In: Journal of Physics: Conference Series, 2012, 395 (1)
doi: 10.26083/tuprints-00020794
Article, Secondary publication, Publisher's Version

Wacławczyk, M. ; Oberlack, M. (2024)
Invariant closure proposals for the interface tracking in two-phase turbulent flows.
In: Journal of Physics: Conference Series, 2011, 318 (4)
doi: 10.26083/tuprints-00020771
Article, Secondary publication, Publisher's Version

Wetterich, Philipp ; Kuhr, Maximilian M. G. ; Pelz, Peter F. (2024)
Model-Based Condition Monitoring of Modular Process Plants.
In: Processes, 2023, 11 (9)
doi: 10.26083/tuprints-00026446
Article, Secondary publication, Publisher's Version

Schmitz, Christian ; Pelz, Peter F. (2024)
Optimal control of tidal flow.
In: Journal of Fluid Mechanics, 2023, 962
doi: 10.26083/tuprints-00026451
Article, Secondary publication, Publisher's Version

Klein, Dominik K. ; Roth, Fabian J. ; Valizadeh, Iman ; Weeger, Oliver (2024)
Parametrized polyconvex hyperelasticity with physics-augmented neural networks.
In: Data-Centric Engineering, 2023, 4
doi: 10.26083/tuprints-00026472
Article, Secondary publication, Publisher's Version

Heng, Yi ; Mhamdi, Adel ; Wagner, Enno ; Stephan, Peter ; Marquardt, Wolfgang (2024)
Identification of boiling heat fluxes in a single-bubble nucleate boiling experiment using a three-dimensional transient heat conduction model.
In: Journal of Physics: Conference Series, 2008, 135 (1)
doi: 10.26083/tuprints-00020679
Article, Secondary publication, Publisher's Version

Kirillov, Oleg N. (2024)
Untwisting the Campbell diagrams of weakly anisotropic rotor systems.
In: Journal of Physics: Conference Series, 2009, 181 (1)
doi: 10.26083/tuprints-00020682
Article, Secondary publication, Publisher's Version

Eberhard, A. ; Beyer, S. ; Klein, M. ; Oechsner, M. (2024)
Übertragung von Methoden zur Kenngrößenermittlung des selbsttätigen Losdrehens für Versuche am Vibrationsprüfstand nach Junker auf Versuche an einem neuentwickelten Prüfaufbau für Einschraubenverbindungen mit kurzer Klemmlänge unter Verwendung eines Axialpulsers.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (2)
doi: 10.26083/tuprints-00017457
Article, Secondary publication, Publisher's Version

Wang, Cheng ; Popp, Christoph ; Winner, Hermann (2024)
Acceleration-Based Collision Criticality Metric for Holistic Online Safety Assessment in Automated Driving.
In: IEEE Access, 2022, 10
doi: 10.26083/tuprints-00026574
Article, Secondary publication, Publisher's Version

Guckes, Lennart ; Hoffmann, Jens ; Schrimpf, Malte ; Winner, Hermann (2024)
“Evaluation of an electromagnetically actuated drum brake concept”.
In: Automotive and Engine Technology, 2023, 8 (2)
doi: 10.26083/tuprints-00026571
Article, Secondary publication, Publisher's Version

Michler, T. ; Bruder, E. ; Lindner, S. (2024)
Hydrogen effects in X30MnCrN16‐14 austenitic steel.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2020, 51 (4)
doi: 10.26083/tuprints-00016735
Article, Secondary publication, Publisher's Version

Heider, B. ; Oechsner, M. ; Engler, T. ; Ellermeier, J. ; Reisgen, U. ; Sharma, R. ; Zokoll, E. ; Gonzalez, E. (2024)
Influence of carbon diffusion on microstructure and wear behaviour of duplex stainless steel surface layers on lamellar grey cast iron.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2019, 50 (10)
doi: 10.26083/tuprints-00016742
Article, Secondary publication, Publisher's Version

Heider, B. ; Scharifi, E. ; Engler, T. ; Oechsner, M. ; Steinhoff, K. (2024)
Influence of heated forming tools on corrosion behavior of high strength aluminum alloys.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (2)
doi: 10.26083/tuprints-00017434
Article, Secondary publication, Publisher's Version

Walther, Jessica ; Dietrich, Bastian ; Grosch, Benedikt Emanuel ; Lindner, Martin ; Fuhrländer-Völker, Daniel ; Strobel, Nina ; Weigold, Matthias (2024)
A Methodology for the Classification and Characterisation of Industrial Demand-Side Integration Measures.
In: Energies, 2022, 15 (3)
doi: 10.26083/tuprints-00026565
Article, Secondary publication, Publisher's Version

Haugwitz, Christoph ; Hartmann, Claas ; Allevato, Gianni ; Rutsch, Matthias ; Hinrichs, Jan ; Brötz, Johannes ; Bothe, Dieter ; Pelz, Peter F. ; Kupnik, Mario (2024)
Multipath Flow Metering of High-Velocity Gas Using Ultrasonic Phased-Arrays.
In: IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control, 2022, 2
doi: 10.26083/tuprints-00026560
Article, Secondary publication, Publisher's Version

Pelz, Peter F. ; Corneli, Tobias ; Mehrnia, Seyedmajid ; Kuhr, Maximilian M. G. (2024)
Temperature-dependent wall slip of Newtonian lubricants.
In: Journal of Fluid Mechanics, 2022, 948
doi: 10.26083/tuprints-00026573
Article, Secondary publication, Publisher's Version

Schmiedl, Tobias ; Gramlich, Alexander R. M. ; Schönborn, Steffen ; Melz, Tobias (2024)
Behavior of Forging Steels under Cyclic Loading — the Benefit of Air‐Hardening Martensites.
In: Steel research international, 2020, 91 (11)
doi: 10.26083/tuprints-00016164
Article, Secondary publication, Publisher's Version

Georg, Niklas ; Römer, Ulrich (2024)
Conformally mapped polynomial chaos expansions for Maxwell's source problem with random input data.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2020, 33 (6)
doi: 10.26083/tuprints-00016182
Article, Secondary publication, Publisher's Version

Kraemer, Fabian ; Stähler, Michael ; Klein, Marcus ; Oechsner, Matthias (2024)
Einfluss von Schmierstoffsystemen auf die Ermüdungsbeanspruchbarkeit von Schraubenverbindungen.
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024664
Article, Secondary publication, Publisher's Version

Aldudak, Fettah ; Oberlack, Martin (2024)
Length scale analysis in wall-bounded turbulent flow by means of Dissipation Elements.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020767
Article, Secondary publication, Publisher's Version

Kriegseis, J. ; Schröter, D. ; Grundmann, S. ; Tropea, C. (2024)
Online-characterization of dielectric barrier discharge plasma actuators for optimized efficiency of aerodynamical flow control applications.
In: Journal of Physics: Conference Series, 2011, 301 (1)
doi: 10.26083/tuprints-00020751
Article, Secondary publication, Publisher's Version

Günzel, Janosch ; Hauß, Joachim ; Groche, Peter (2024)
Opportunities, Challenges, and Influencing Factors in the Forming of Preconditioned Semi‐Finished Products Made of EN AW‐6082 and ‐7075.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024699
Article, Secondary publication, Publisher's Version

Avsarkisov, Victor S. ; Oberlack, Martin ; Khujadze, George (2024)
Turbulent Poiseuille Flow with Wall Transpiration: Analytical Study and Direct Numerical Simulation.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020766
Article, Secondary publication, Publisher's Version

Leštáková, Michaela ; Logan, Kevin T. ; Rehm, Imke-Sophie ; Pelz, Peter F. ; Friesen, John (2024)
Do resilience metrics of water distribution systems really assess resilience? A critical review.
In: Water Research, 2024, 248
doi: 10.26083/tuprints-00026544
Article, Secondary publication, Publisher's Version

Lindner, Martin ; Grosch, Benedikt Emanuel ; Elserafi, Ghada ; Dietrich, Bastian ; Weigold, Matthias (2024)
Holistic Approach for an Energy-Flexible Operation of a Machine Tool with Cooling Supply.
In: Energies, 2023, 16 (9)
doi: 10.26083/tuprints-00026545
Article, Secondary publication, Publisher's Version

Chandra, Caroline Karina ; Sommer, Niklas ; Heider, Ben ; Hatzky, Marcel ; Reitz, Rüdiger ; Böhm, Stefan ; Oechsner, Matthias (2024)
Influence of Friction Stir Weld Parameters on the Corrosion Susceptibility of EN AW‐7075 Weld Seam and Heat‐Affected Zone.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024701
Article, Secondary publication, Publisher's Version

Zhang, Mao-Hua ; Ding, Hui ; Egert, Sonja ; Zhao, Changhao ; Villa, Lorenzo ; Fulanović, Lovro ; Groszewicz, Pedro B. ; Buntkowsky, Gerd ; Kleebe, Hans-Joachim ; Albe, Karsten ; Klein, Andreas ; Koruza, Jurij (2024)
Tailoring high-energy storage NaNbO₃-based materials from antiferroelectric to relaxor states.
In: Nature Communications, 2023, 14 (1)
doi: 10.26083/tuprints-00026514
Article, Secondary publication, Publisher's Version

Asghar, Muhammad Hassan ; Brockmann, Philipp ; Dong, Xulan ; Niethammer, Matthias ; Maric, Tomislav ; Roisman, Ilia ; Bothe, Dieter (2024)
Asymmetry During Fast Stretching of a Liquid Bridge.
In: Chemical Engineering & Technology, 2023, 46 (9)
doi: 10.26083/tuprints-00024704
Article, Secondary publication, Publisher's Version

Emmert, Johannes ; Baroncelli, Martina ; Kley, Sani van der ; Pitsch, Heinz ; Wagner, Steven (2024)
Axisymmetric Linear Hyperspectral Absorption Spectroscopy and Residuum-Based Parameter Selection on a Counter Flow Burner.
In: Energies, 2019, 12 (14)
doi: 10.26083/tuprints-00015593
Article, Secondary publication, Publisher's Version

Martelli, Emanuele ; Alobaid, Falah (2024)
Editorial: Targeting the Optimal Design and Operational Flexibility of Steam Cycles and Steam Networks.
In: Frontiers in Energy Research, 2021, 9
doi: 10.26083/tuprints-00019968
Article, Secondary publication, Publisher's Version

Idrissi, Mohamed Salah ; Ben Salah, Nabil ; Chrigui, Mouldi (2024)
Numerical Modelling of Air Pollutant Dispersion in Complex Urban Areas: Investigation of City Parts from Downtowns Hanover and Frankfurt.
In: Fluids, 2019, 4 (3)
doi: 10.26083/tuprints-00015700
Article, Secondary publication, Publisher's Version

Del Vecchio, Alessandro ; Castellini, Claudio ; Beckerle, Philipp (2024)
Peripheral Neuroergonomics – An Elegant Way to Improve Human-Robot Interaction?
In: Frontiers in Neurorobotics, 2021, 15
doi: 10.26083/tuprints-00019632
Article, Secondary publication, Publisher's Version

Akentiev, Alexander ; Lin, Shi-Yow ; Loglio, Giuseppe ; Miller, Reinhard ; Noskov, Boris (2024)
Surface Properties of Aqueous Dispersions of Bovine Serum Albumin Fibrils.
In: Colloids and Interfaces, 2023, 7 (3)
doi: 10.26083/tuprints-00024642
Article, Secondary publication, Publisher's Version

Saini, Rohit ; Karimi, Nader ; Duan, Lian ; Sadiki, Amsini ; Mehdizadeh, Amirfarhang (2024)
Effects of Near Wall Modeling in the Improved-Delayed-Detached-Eddy-Simulation (IDDES) Methodology.
In: Entropy, 2018, 20 (10)
doi: 10.26083/tuprints-00015841
Article, Secondary publication, Publisher's Version

Mahmoud, Rihab ; Jangi, Mehdi ; Fiorina, Benoit ; Pfitzner, Michael ; Sadiki, Amsini (2024)
Numerical Investigation of an OxyfuelNon-Premixed CombustionUsing a Hybrid Eulerian Stochastic Field/Flamelet Progress Variable Approach: Effects of H₂/CO₂ Enrichment and Reynolds Number.
In: Energies, 2018, 11 (11)
doi: 10.26083/tuprints-00016647
Article, Secondary publication, Publisher's Version

Keshavarzi, Behnam ; Mahmoudvand, Mohsen ; Javadi, Aliyar ; Bahramian, Alireza ; Miller, Reinhard ; Eckert, Kerstin (2024)
Salt Effects on Formation and Stability of Colloidal Gas Aphrons Produced by Anionic and Zwitterionic Surfactants in Xanthan Gum Solution.
In: Colloids and Interfaces, 2020, 4 (1)
doi: 10.26083/tuprints-00016109
Article, Secondary publication, Publisher's Version

Savuto, Elisa ; May, Jan ; Di Carlo, Andrea ; Gallucci, Katia ; Di Giuliano, Andrea ; Rapagnà, Sergio (2024)
Steam Gasification of Lignite in a Bench-Scale Fluidized-Bed Gasifier Using Olivine as Bed Material.
In: Applied Sciences, 2020, 10 (8)
doi: 10.26083/tuprints-00016616
Article, Secondary publication, Publisher's Version

Koob, Philipp ; Ferraro, Federica ; Nicolai, Hendrik ; Eggels, Ruud ; Staufer, Max ; Hasse, Christian (2024)
Large Eddy Simulation of Soot Formation in a Real Aero-Engine Combustor Using Tabulated Chemistry and a Quadrature-Based Method of Moments.
In: Journal of Engineering for Gas Turbines and Power, 2024, 146 (1)
doi: 10.26083/tuprints-00026528
Article, Secondary publication, Postprint

Alobaid, Falah ; Ströhle, Jochen (2024)
Special Issue "Thermochemical Conversion Processes for Solid Fuels and Renewable Energies".
In: Applied Sciences, 2021, 11 (4)
doi: 10.26083/tuprints-00017770
Article, Secondary publication, Publisher's Version

Witt, Felix ; Nwaboh, Javis ; Bohlius, Henning ; Lampert, Astrid ; Ebert, Volker (2024)
Towards a Fast, Open-Path Laser Hygrometer for Airborne Eddy Covariance Measurements.
In: Applied Sciences, 2021, 11 (11)
doi: 10.26083/tuprints-00019544
Article, Secondary publication, Publisher's Version

Nwaboh, Javis A. ; Qu, Zhechao ; Werhahn, Olav ; Ebert, Volker (2024)
Towards an Optical Gas Standard for Traceable Calibration-Free and Direct NO₂ Concentration Measurements.
In: Applied Sciences, 2021, 11 (12)
doi: 10.26083/tuprints-00019526
Article, Secondary publication, Publisher's Version

Al-Maliki, Wisam Abed Kattea ; Mahmoud, Nabeel Sameer ; Al-Khafaji, Hussein M. H. ; Alobaid, Falah ; Epple, Bernd (2024)
Design and Implementation of the Solar Field and Thermal Storage System Controllers for a Parabolic Trough Solar Power Plant.
In: Applied Sciences, 2021, 11 (13)
doi: 10.26083/tuprints-00019573
Article, Secondary publication, Publisher's Version

Alibak, Ali Hosin ; Alizadeh, Seyed Mehdi ; Davodi Monjezi, Shaghayegh ; Alizadeh, As’ad ; Alobaid, Falah ; Aghel, Babak (2024)
Developing a Hybrid Neuro-Fuzzy Method to Predict Carbon Dioxide (CO₂) Permeability in Mixed Matrix Membranes Containing SAPO-34 Zeolite.
In: Membranes, 2022, 12 (11)
doi: 10.26083/tuprints-00022971
Article, Secondary publication, Publisher's Version

Zhen, Yongcheng ; Bao, Yong ; Zhong, Zaimin ; Rinderknecht, Stephan ; Zhou, Song (2024)
Development of a PHEV Hybrid Transmission for Low-End MPVs Based on AMT.
In: Vehicles, 2020, 2 (2)
doi: 10.26083/tuprints-00022225
Article, Secondary publication, Publisher's Version

Nwaboh, Javis A. ; Werhahn, Olav ; Ebert, Volker (2024)
H₂O Collisional Broadening Coefficients at 1.37 µm and Their Temperature Dependence: A Metrology Approach.
In: Applied Sciences, 2021, 11 (12)
doi: 10.26083/tuprints-00019546
Article, Secondary publication, Publisher's Version

Blat Belmonte, Benjamin ; Esser, Arved ; Weyand, Steffi ; Franke, Georg ; Schebek, Liselotte ; Rinderknecht, Stephan (2024)
Identification of the Optimal Passenger Car Vehicle Fleet Transition for Mitigating the Cumulative LifeCycle Greenhouse Gas Emissions until 2050.
In: Vehicles, 2020, 2 (1)
doi: 10.26083/tuprints-00022274
Article, Secondary publication, Publisher's Version

Wu, Wen-Ping ; Şopu, Daniel ; Eckert, Jürgen (2024)
Molecular Dynamics Study of the Nanoindentation Behavior of Cu₆₄Zr₃₆/Cu Amorphous/Crystalline Nanolaminate Composites.
In: Materials, 2021, 14 (11)
doi: 10.26083/tuprints-00019644
Article, Secondary publication, Publisher's Version

Obando Vega, Pedro Javier ; Coussement, Axel ; Sadiki, Amsini ; Parente, Alessandro (2024)
Non-Premixed Filtered Tabulated Chemistry: Filtered Flame Modeling of Diffusion Flames.
In: Fuels, 2021, 2 (2)
doi: 10.26083/tuprints-00022205
Article, Secondary publication, Publisher's Version

Jardin, Philippe ; Esser, Arved ; Givone, Stefano ; Eichenlaub, Tobias ; Schleiffer, Jean-Eric ; Rinderknecht, Stephan (2024)
The Sensitivity in Consumption of Different Vehicle Drivetrain Concepts Under Varying Operating Conditions: A Simulative Data Driven Approach.
In: Vehicles, 2019, 1 (1)
doi: 10.26083/tuprints-00022234
Article, Secondary publication, Publisher's Version

Schleiffer, Jean-Eric ; Harselaar, Wilco van ; Shen, Ye ; Rinderknecht, Stephan (2024)
Simulative Assessment of Novel Parallel-Hybrid-Electric Powertrains: Consideration of Transmission System Power Losses.
In: Vehicles, 2020, 2 (1)
doi: 10.26083/tuprints-00022277
Article, Secondary publication, Publisher's Version

Jardin, Philippe ; Esser, Arved ; Rinderknecht, Stephan (2024)
Special Issue on Future Powertrain Technologies.
In: Vehicles, 2020, 2 (4)
doi: 10.26083/tuprints-00022226
Article, Secondary publication, Publisher's Version

Ronshin, F. ; Sielaff, A. ; Tadrist, L. ; Stephan, P. ; Kabov, O. (2024)
Dynamics of bubble growth during boiling at microgravity.
In: Journal of Physics: Conference Series, 2021, 2119 (1)
doi: 10.26083/tuprints-00020365
Article, Secondary publication, Publisher's Version

Deußen, B. ; Jayaram, A. ; Kummer, F. ; Wang, Y. ; Speck, T. ; Oberlack, M. (2024)
High-order simulation scheme for active particles driven by stress boundary conditions.
In: Journal of Physics: Condensed Matter, 2021, 33 (24)
doi: 10.26083/tuprints-00020428
Article, Secondary publication, Publisher's Version

Ostrowski, T. ; Schiffer, H.-P. (2024)
High-resolution heat transfer measurements on a rotating turbine endwall with infrared thermography.
In: Measurement Science and Technology, 2021, 32 (12)
doi: 10.26083/tuprints-00020468
Article, Secondary publication, Publisher's Version

Li, Yaya ; Rehbock, Christoph ; Nachev, Milen ; Stamm, Jacqueline ; Sures, Bernd ; Blaeser, Andreas ; Barcikowski, Stephan (2024)
Matrix-specific mechanism of Fe ion release from laser-generated 3D-printable nanoparticle-polymer composites and their protein adsorption properties.
In: Nanotechnology, 2020, 31 (40)
doi: 10.26083/tuprints-00020475
Article, Secondary publication, Publisher's Version

Stephan, Michael ; Zentgraf, Florian ; Berrocal, Edouard ; Albert, Barbara ; Böhm, Benjamin ; Dreizler, Andreas (2024)
Multiple scattering reduction in instantaneous gas phase phosphor thermometry: applications with dispersed seeding.
In: Measurement Science and Technology, 2019, 30 (5)
doi: 10.26083/tuprints-00020465
Article, Secondary publication, Publisher's Version

Oltmanns, Johannes ; Sauerwein, David ; Dammel, Frank ; Stephan, Peter ; Kuhn, Christoph (2024)
Potential for waste heat utilization of hot‐water‐cooled data centers: A case study.
In: Energy Science & Engineering, 2020, 8 (5)
doi: 10.26083/tuprints-00016187
Article, Secondary publication, Publisher's Version

Geisenhofer, Markus ; Kummer, Florian ; Müller, Björn (2024)
A discontinuous Galerkin immersed boundary solver for compressible flows: Adaptive local time stepping for artificial viscosity-based shock‐capturing on cut cells.
In: International Journal for Numerical Methods in Fluids, 2019, 91 (9)
doi: 10.26083/tuprints-00015956
Article, Secondary publication, Publisher's Version

Mistry, Yash ; Weeger, Oliver ; Morankar, Swapnil ; Shinde, Mandar ; Liu, Siying ; Chawla, Nikhilesh ; Chen, Xiangfan ; Penick, Clint A. ; Bhate, Dhruv (2024)
Bio-inspired selective nodal decoupling for ultra-compliant interwoven lattices.
In: Communications Materials, 2023, 4 (1)
doi: 10.26083/tuprints-00026474
Article, Secondary publication, Publisher's Version

Weeger, Oliver ; Valizadeh, Iman ; Mistry, Yash ; Bhate, Dhruv (2024)
Inelastic finite deformation beam modeling, simulation, and validation of additively manufactured lattice structures.
In: Additive Manufacturing Letters, 2023, 4
doi: 10.26083/tuprints-00026473
Article, Secondary publication, Publisher's Version

Gerlitzky, C. ; Kuhn, C. ; Groche, P. ; Tran, T.H. ; Zhang, S. ; Peter, N.J. ; Rohwerder, M. (2024)
3D cold pressure welded components – From the bonding mechanisms to the production of high strength joints.
In: Materials Science & Engineering Technology - Materialwissenschaft und Werkstofftechnik, 2019, 50 (8)
doi: 10.26083/tuprints-00017430
Article, Secondary publication, Publisher's Version

Bremm, Sophia ; Hell, Sascha ; Becker, Wilfried (2024)
Convergence behaviour of the enriched scaled boundary finite element method.
In: International Journal for Numerical Methods in Engineering, 2019, 120 (7)
doi: 10.26083/tuprints-00016737
Article, Secondary publication, Publisher's Version

Dietrich, Axel ; Dammel, Frank ; Stephan, Peter (2024)
Exergoeconomic analysis of a pumped heat electricity storage system based on a Joule/Brayton cycle.
In: Energy Science & Engineering, 2020, 9 (5)
doi: 10.26083/tuprints-00017805
Article, Secondary publication, Publisher's Version

Greifenstein, M. ; Dreizler, A. (2024)
MARSFT: Efficient fitting of CARS spectra using a library‐based genetic algorithm.
In: Journal of Raman Spectroscopy, 2021, 52 (3)
doi: 10.26083/tuprints-00017817
Article, Secondary publication, Publisher's Version

Kikker, Anne ; Kummer, Florian ; Oberlack, Martin (2024)
A fully coupled high‐order discontinuous Galerkin solver for viscoelastic fluid flow.
In: International Journal for Numerical Methods in Fluids, 2021, 93 (6)
doi: 10.26083/tuprints-00017814
Article, Secondary publication, Publisher's Version

Reinders, P. M. ; Patel, R. R. ; Musekamp, J. ; Kaestner, P. ; Hoche, H. ; Bräuer, G. ; Oechsner, M. (2023)
Determination of the s‐phase formation coefficient of plasma nitrided austenitic steel.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (2)
doi: 10.26083/tuprints-00017827
Article, Secondary publication, Publisher's Version

Reiber, T. ; Rüdesheim, J. ; Weigold, M. ; Abele, E. ; Musekamp, J. ; Oechsner, M. (2023)
Influence of contour scans on surface roughness and pore formation using Scalmalloy® manufactured by laser powder bed fusion (PBF‐LB).
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (4)
doi: 10.26083/tuprints-00020136
Article, Secondary publication, Publisher's Version

Stockinger, Christopher ; Stuke, Fokko ; Subtil, Ilka (2023)
User‐centered development of a worker guidance system for a flexible production line.
In: Human Factors and Ergonomics in Manufacturing & Service Industries, 2021, 31 (5)
doi: 10.26083/tuprints-00020131
Article, Secondary publication, Publisher's Version

Hock, Martin ; Mayr, Hannes ; Richter, Manuela ; Lemmer, Jan ; Pelz, Peter F. (2023)
plotID - a toolkit for connecting research data and visualization.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (1)
doi: 10.26083/tuprints-00026400
Article, Secondary publication, Publisher's Version

Becker-Dombrowsky, Florian Michael ; Hausmann, Maximilian ; Welzbacher, Peter ; Harder, André ; Kirchner, Eckhard (2023)
Systematic identification of disturbance factors on electric characteristics of mechanical gearboxes.
In: Forschung im Ingenieurwesen, 2023, 87 (1)
doi: 10.26083/tuprints-00026407
Article, Secondary publication, Publisher's Version

Harder, André ; Gross, Hans Joachim ; Vorwerk-Handing, Gunnar ; Kirchner, Eckhard (2023)
Using effect catalogues for the design of sensing machine elements – Method and exemplary application.
In: Proceedings of the Design Society, 2021, 1
doi: 10.26083/tuprints-00026408
Article, Secondary publication, Publisher's Version

Duarte Campos, Daniela F. ; Lindsay, Christopher D. ; Roth, Julien G. ; LeSavage, Bauer L. ; Seymour, Alexis J. ; Krajina, Brad A. ; Ribeiro, Ricardo ; Costa, Pedro F. ; Blaeser, Andreas ; Heilshorn, Sarah C. (2023)
Bioprinting Cell- and Spheroid-Laden Protein-Engineered Hydrogels as Tissue-on-Chip Platforms.
In: Frontiers in Bioengineering and Biotechnology, 2020, 8
doi: 10.26083/tuprints-00016294
Article, Secondary publication, Publisher's Version

Geschwindner, Christopher ; Kranz, Patrick ; Welch, Cooper ; Schmidt, Marius ; Böhm, Benjamin ; Kaiser, Sebastian A. ; Morena, Joaquin De la (2023)
Analysis of the interaction of Spray G and in-cylinder flow in two optical engines for late gasoline direct injection.
In: International Journal of Engine Research, 2020, 21 (1)
doi: 10.26083/tuprints-00016620
Article, Secondary publication, Publisher's Version

Ding, Carl-Philipp ; Vuilleumier, David ; Kim, Namho ; Reuss, David L. ; Sjöberg, Magnus ; Böhm, Benjamin (2023)
Effect of engine conditions and injection timing on piston-top fuel films for stratified direct-injection spark-ignition operation using E30.
In: International Journal of Engine Research, 2020, 21 (2)
doi: 10.26083/tuprints-00016623
Article, Secondary publication, Publisher's Version

Stefanitsis, Dionisis ; Nesiadis, Athanasios ; Koutita, Konstantina ; Nikolopoulos, Aristeidis ; Nikolopoulos, Nikolaos ; Peters, Jens ; Ströhle, Jochen ; Epple, Bernd (2023)
Simulation of a CFB Boiler Integrated With a Thermal Energy Storage System During Transient Operation.
In: Frontiers in Energy Research, 2020, 8
doi: 10.26083/tuprints-00017038
Article, Secondary publication, Publisher's Version

Friesen, John ; Friesen, Victoria ; Dietrich, Ingo ; Pelz, Peter F. (2023)
Slums, Space, and State of Health — A Link between Settlement Morphology and Health Data.
In: International Journal of Environmental Research and Public Health, 2020, 17 (6)
doi: 10.26083/tuprints-00016152
Article, Secondary publication, Publisher's Version

Li, Dongyue ; Marchisio, Daniele ; Hasse, Christian ; Lucas, Dirk (2023)
Comparison of Eulerian QBMM and classical Eulerian–Eulerian method for the simulation of polydisperse bubbly flows.
In: AIChE Journal, 2019, 65 (11)
doi: 10.26083/tuprints-00016157
Article, Secondary publication, Publisher's Version

Wacławczyk, Marta ; Grebenev, Vladimir N. ; Oberlack, Martin (2023)
Conformal Invariance of Characteristic Lines in a Class of Hydrodynamic Models.
In: Symmetry, 2020, 12 (9)
doi: 10.26083/tuprints-00015966
Article, Secondary publication, Publisher's Version

Heep, Thomas ; Bickert, Christian ; Abele, Eberhard (2023)
Application of Carbon Dioxide Snow in Machining of CGI using an Additively Manufactured Turning Tool.
In: Journal of Manufacturing and Materials Processing, 2019, 3 (1)
doi: 10.26083/tuprints-00015945
Article, Secondary publication, Publisher's Version

Merklein, Lisa ; Daume, Dominik ; Braig, Felix ; Schlisske, Stefan ; Rödlmeier, Tobias ; Mink, Marvin ; Kourkoulos, Dimitrios ; Ulber, Benjamin ; Di Biase, Manuela ; Meerholz, Klaus ; Hernandez-Sosa, Gerardo ; Lemmer, Uli ; Sauer, Hans Martin ; Dörsam, Edgar ; Scharfer, Philip ; Schabel, Wilhelm (2023)
Comparative Study of Printed Multilayer OLED Fabrication through Slot Die Coating, Gravure and Inkjet Printing, and Their Combination.
In: Colloids and Interfaces, 2019, 3 (1)
doi: 10.26083/tuprints-00015690
Article, Secondary publication, Publisher's Version

Roy, Tamal ; Szuttor, Kai ; Smiatek, Jens ; Holm, Christian ; Hardt, Steffen (2023)
Conformation and Dynamics of Long-Chain End-Tethered Polymers in Microchannels.
In: Polymers, 2019, 11 (3)
doi: 10.26083/tuprints-00015814
Article, Secondary publication, Publisher's Version

Sacomano Filho, Fernando Luiz ; Dressler, Louis ; Hosseinzadeh, Arash ; Sadiki, Amsini ; Krieger Filho, Guenther Carlos (2023)
Investigations of Evaporative Cooling and Turbulence Flame Interaction Modeling in Ethanol Turbulent Spray Combustion Using Tabulated Chemistry.
In: Fluids, 2019, 4 (4)
doi: 10.26083/tuprints-00015742
Article, Secondary publication, Publisher's Version

Brumm, Pauline ; Sauer, Hans Martin ; Dörsam, Edgar (2023)
Scaling Behavior of Pattern Formation in the Flexographic Ink Splitting Process.
In: Colloids and Interfaces, 2019, 3 (1)
doi: 10.26083/tuprints-00015820
Article, Secondary publication, Publisher's Version

Kumar, Abhijeet ; Kleinen, Jochen ; Venzmer, Joachim ; Trybala, Anna ; Starov, Victor ; Gambaryan-Roisman, Tatiana (2023)
Spreading and Imbibition of Vesicle Dispersion Droplets on Porous Substrates.
In: Colloids and Interfaces, 2019, 3 (3)
doi: 10.26083/tuprints-00015683
Article, Secondary publication, Publisher's Version

Beckerle, Philipp ; Stuhlenmiller, Florian ; Rinderknecht, Stephan (2023)
Stiffness Control of Variable Serial Elastic Actuators: Energy Efficiency through Exploitation of Natural Dynamics.
In: Actuators, 2017, 6 (4)
doi: 10.26083/tuprints-00015622
Article, Secondary publication, Publisher's Version

Dreher, Daniel ; Schmidt, Marius ; Welch, Cooper ; Ourza, Sara ; Zündorf, Samuel ; Maucher, Johannes ; Peters, Steven ; Dreizler, Andreas ; Böhm, Benjamin ; Hanuschkin, Alexander (2023)
Deep feature learning of in-cylinder flow fields to analyze cycle-to-cycle variations in an SI engine.
In: International Journal of Engine Research, 2021, 22 (11)
doi: 10.26083/tuprints-00020179
Article, Secondary publication, Publisher's Version

Schneider, Patrick ; Kienzler, Reinhold (2023)
Dimensioning of thick-walled spherical and cylindrical pressure vessels.
In: Mathematics and Mechanics of Solids, 2020, 25 (7)
doi: 10.26083/tuprints-00016989
Article, Secondary publication, Publisher's Version

Sattler, Bernhard Jonathan ; Friesen, John ; Tundis, Andrea ; Pelz, Peter F. (2023)
Modeling and Validation of Residential Water Demand in Agent-Based Models: A Systematic Literature Review.
In: Water, 2023, 15 (3)
doi: 10.26083/tuprints-00023352
Article, Secondary publication, Publisher's Version

Fach, Christian ; Rödel, Nico ; Schorr, Jürgen ; Krüger, Christian ; Dreizler, Andreas ; Böhm, Benjamin (2023)
Multi-parameter imaging of in-cylinder processes during transient engine operation for the investigation of soot formation.
In: International Journal of Engine Research, 2022, 23 (9)
doi: 10.26083/tuprints-00022025
Article, Secondary publication, Publisher's Version

Hatada, Ruriko ; Flege, Stefan ; Ensinger, Wolfgang ; Hesse, Sabine ; Tanabe, Shuji ; Nishimura, Yasuhisa ; Baba, Koumei (2023)
Preparation of Aniline-Based Nitrogen-Containing Diamond-Like Carbon Films with Low Electrical Resistivity.
In: Coatings, 2020, 10 (1)
doi: 10.26083/tuprints-00016108
Article, Secondary publication, Publisher's Version

Ratz, Johannes ; Leichtfuß, Sebastian ; Beck, Maximilian ; Schiffer, Heinz-Peter ; Fröhlig, Friedrich (2023)
Surge Margin Optimization of Centrifugal Compressors Using a New Objective Function Based on Local Flow Parameters.
In: International Journal of Turbomachinery, Propulsion and Power, 2019, 4 (4)
doi: 10.26083/tuprints-00016113
Article, Secondary publication, Publisher's Version

Bremm, Sophia ; Rosendahl, Philipp L. ; Becker, Wilfried (2023)
Application of a reduced basis method for an efficient treatment of structural mechanics problems.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2021, 20 (1)
doi: 10.26083/tuprints-00017825
Article, Secondary publication, Publisher's Version

Schreiber, Philip ; Mittelstedt, Christian (2023)
Closed‐form buckling analysis of unsymmetrically laminated plates.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023687
Article, Secondary publication, Publisher's Version

Sajadifar, Seyed Vahid ; Suckow, Timon ; Heider, Ben ; Oechsner, Matthias ; Groche, Peter ; Niendorf, Thomas (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version

Müller, Henning ; Schlüter, Alexander ; Müller, Ralf (2023)
Dynamic Crack Propagation in a Lattice Boltzmann Method for Solid Mechanics.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023691
Article, Secondary publication, Publisher's Version

Werschnik, Holger ; Schneider, Marius ; Herrmann, Janina ; Ivanov, Dimitri ; Schiffer, Heinz-Peter ; Lyko, Christoph (2023)
The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR): Experimental and Numerical Investigation.
In: International Journal of Turbomachinery, Propulsion and Power, 2017, 2 (3)
doi: 10.26083/tuprints-00015426
Article, Secondary publication, Publisher's Version

Lin, Binbin ; Medghalchi, Setareh ; Korte-Kerzel, Sandra ; Xu, Bai-Xiang (2023)
A Machine Learning Enabled Image‐data‐driven End‐to‐end Mechanical Field Predictor For Dual‐Phase Steel.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023695
Article, Secondary publication, Publisher's Version

Melzi d'Eril, Marco ; Graczyk‐Zajac, Magdalena Joanna ; Riedel, Ralf (2023)
On the Reversible Sodium Plating/stripping Reaction in Porous SiCN(O) Ceramic: A Feasibility Study.
In: Batteries & Supercaps, 2023, 6 (3)
doi: 10.26083/tuprints-00023713
Article, Secondary publication, Publisher's Version

Schneider, Marius ; Schiffer, Heinz-Peter ; Lehmann, Knut (2023)
Parameterised Model of 2D Combustor Exit Flow Conditions for High-Pressure Turbine Simulations.
In: International Journal of Turbomachinery, Propulsion and Power, 2017, 2 (4)
doi: 10.26083/tuprints-00015434
Article, Secondary publication, Publisher's Version

Schilling, Jakob C. ; Mittelstedt, Christian (2023)
Approximate computational model for the local postbuckling of omega‐stringer‐stiffened composite panels.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023730
Article, Secondary publication, Publisher's Version

Sun, W. ; Meng, X. ; Wang, Y. ; Hsiau, S. S. ; You, Z. (2023)
A Depth‐Averaged Description of Submarine Avalanche Flows and Induced Surface Waves.
In: Journal of Geophysical Research: Earth Surface, 2023, 128 (4)
doi: 10.26083/tuprints-00023726
Article, Secondary publication, Publisher's Version

Preuß, Oliver ; Bruder, Enrico ; Lu, Wenjun ; Zhuo, Fangping ; Minnert, Christian ; Zhang, Jiawen ; Rödel, Jürgen ; Fang, Xufei (2023)
Dislocation toughening in single‐crystal KNbO₃.
In: Journal of the American Ceramic Society, 2023, 106 (7)
doi: 10.26083/tuprints-00024324
Article, Secondary publication, Publisher's Version

Schneider, Christian ; Schmidt, Christoph P. ; Neumann, Anton ; Clausnitzer, Moritz ; Sadowski, Marcel ; Harm, Sascha ; Meier, Christoph ; Danner, Timo ; Albe, Karsten ; Latz, Arnulf ; Wall, Wolfgang A. ; Lotsch, Bettina V. (2023)
Effect of Particle Size and Pressure on the Transport Properties of the Fast Ion Conductor t‐Li₇SiPS₈.
In: Advanced Energy Materials, 2023, 13 (15)
doi: 10.26083/tuprints-00024316
Article, Secondary publication, Publisher's Version

Fang, Xufei ; Preuß, Oliver ; Breckner, Patrick ; Zhang, Jiawen ; Lu, Wenjun (2023)
Engineering dislocation‐rich plastic zones in ceramics via room‐temperature scratching.
In: Journal of the American Ceramic Society, 2023, 106 (8)
doi: 10.26083/tuprints-00024320
Article, Secondary publication, Publisher's Version

Lan, Shuang ; Zheng, Mupeng ; Zhuo, Fangping ; Zhu, Mankang ; Hou, Yudong (2023)
Enhanced Piezo-Photocatalytic Performance of Na₀.₅Bi₄.₅Ti₄O₁₅ by High-Voltage Poling.
In: Materials, 2023, 16 (14)
doi: 10.26083/tuprints-00024408
Article, Secondary publication, Publisher's Version

Bienefeld, Christoph ; Becker-Dombrowsky, Florian Michael ; Shatri, Etnik ; Kirchner, Eckhard (2023)
Investigation of Feature Engineering Methods for Domain-Knowledge-Assisted Bearing Fault Diagnosis.
In: Entropy, 2023, 25 (9)
doi: 10.26083/tuprints-00024494
Article, Secondary publication, Publisher's Version

Wilbrink, Marc ; Cieler, Stephan ; Weiß, Sebastian L. ; Beggiato, Matthias ; Joisten, Philip ; Feierle, Alexander ; Oehl, Michael (2023)
Principles for External Human-Machine Interfaces.
In: Information, 2023, 14 (8)
doi: 10.26083/tuprints-00024501
Article, Secondary publication, Publisher's Version

Gajevic Joksimovic, Marija ; Hussong, Jeanette ; Tropea, Cameron ; Roisman, Ilia V. (2023)
Spray impact onto a hot solid substrate: Film boiling suppression by lubricant addition.
In: Frontiers in Physics, 2023, 11
doi: 10.26083/tuprints-00023770
Article, Secondary publication, Publisher's Version

Mehrnia, Seyedmajid ; Pelz, Peter F. (2023)
Tribological Design by Molecular Dynamics Simulation: Influence of the Molecular Structure on Wall Slip and Bulk Shear.
In: Chemical Engineering & Technology, 2023, 46 (1)
doi: 10.26083/tuprints-00023722
Article, Secondary publication, Publisher's Version

Freudigmann, H-A. ; Iben, U. ; Pelz, P. F. (2023)
Air release measurements of V-oil 1404 downstream of a micro orifice at choked flow conditions.
In: Journal of Physics: Conference Series, 2015, 656 (1)
doi: 10.26083/tuprints-00020861
Article, Secondary publication, Publisher's Version

Ries, Florian ; Li, Yongxiang ; Rißmann, Martin ; Klingenberg, Dario ; Nishad, Kaushal ; Böhm, Benjamin ; Dreizler, Andreas ; Janicka, Johannes ; Sadiki, Amsini (2023)
Database of Near-Wall Turbulent Flow Properties of a Jet Impinging on a Solid Surface under Different Inclination Angles.
In: Fluids, 2018, 3 (1)
doi: 10.26083/tuprints-00016349
Article, Secondary publication, Publisher's Version

Moeini, Ghazal ; Sajadifar, Seyed Vahid ; Engler, Tom ; Heider, Ben ; Niendorf, Thomas ; Oechsner, Matthias ; Böhm, Stefan (2023)
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components.
In: Metals, 2020, 10 (1)
doi: 10.26083/tuprints-00016122
Article, Secondary publication, Publisher's Version

Rosenburg, Felix ; Ionescu, Emanuel ; Nicoloso, Norbert ; Riedel, Ralf (2023)
High-Temperature Raman Spectroscopy of Nano-Crystalline Carbon in Silicon Oxycarbide.
In: Materials, 2018, 11 (1)
doi: 10.26083/tuprints-00016368
Article, Secondary publication, Publisher's Version

Recklin, Viktor ; Dietrich, Felix ; Groche, Peter (2023)
In-situ-measurement of the friction coefficient in the deep drawing process.
In: Journal of Physics: Conference Series, 2017, 896 (1)
doi: 10.26083/tuprints-00020933
Article, Secondary publication, Publisher's Version

Löwe, Jens ; Kintea, Daniel ; Baumert, Arne ; Bansmer, Stephan ; Roisman, Ilia V. ; Tropea, Cameron (2023)
Inception of ice accretion by ice crystal impact.
In: Journal of Physics: Conference Series, 2016, 745 (3)
doi: 10.26083/tuprints-00020874
Article, Secondary publication, Publisher's Version

Hatada, Ruriko ; Flege, Stefan ; Ashraf, Muhammad Naeem ; Timmermann, Arne ; Schmid, Christoph ; Ensinger, Wolfgang (2023)
The Influence of Preparation Conditions on the Structural Properties and Hardness of Diamond-Like Carbon Films, Prepared by Plasma Source Ion Implantation.
In: Coatings, 2020, 10 (4)
doi: 10.26083/tuprints-00016151
Article, Secondary publication, Publisher's Version

Meyer, Guillaume ; Brenne, Florian ; Niendorf, Thomas ; Mittelstedt, Christian (2023)
Influence of the Miniaturisation Effect on the Effective Stiffness of Lattice Structures in Additive Manufacturing.
In: Metals, 2020, 10 (11)
doi: 10.26083/tuprints-00016184
Article, Secondary publication, Publisher's Version

Schardt, Sven ; Weidler, Natascha ; Wallace, W. David Z. ; Martinaiou, Ioanna ; Stark, Robert W. ; Kramm, Ulrike I. (2023)
Influence of the Structure-Forming Agent on the Performance of Fe-N-C Catalysts.
In: Catalysts, 2018, 8 (7)
doi: 10.26083/tuprints-00016437
Article, Secondary publication, Publisher's Version

Kraft, Markus ; Rinderknecht, Stephan (2023)
A Method for the Quantification of Powertrain Electrification Impacts on Driving Dynamics.
In: World Electric Vehicle Journal, 2018, 9 (2)
doi: 10.26083/tuprints-00016424
Article, Secondary publication, Publisher's Version

Wacławczyk, Tomasz ; Wacławczyk, Marta ; Kraheberger, Stefanie V. (2023)
Modelling of turbulence-interface interactions in stratified two-phase flows.
In: Journal of Physics: Conference Series, 2014, 530 (1)
doi: 10.26083/tuprints-00020827
Article, Secondary publication, Publisher's Version

Perfetto, Sara ; Rohlfing, Jens ; Infante, F. ; Mayer, D. ; Herold, Sven (2023)
Test rig with active damping control for the simultaneous evaluation of vibration control and energy harvesting via piezoelectric transducers.
In: Journal of Physics: Conference Series, 2016, 744 (1)
doi: 10.26083/tuprints-00020871
Article, Secondary publication, Publisher's Version

Söhling, Nicolas ; Neijhoft, Jonas ; Nienhaus, Vinzenz ; Acker, Valentin ; Harbig, Jana ; Menz, Fabian ; Ochs, Joachim ; Verboket, René D. ; Ritz, Ulrike ; Blaeser, Andreas ; Dörsam, Edgar ; Frank, Johannes ; Marzi, Ingo ; Henrich, Dirk (2023)
3D-Printing of Hierarchically Designed and Osteoconductive Bone Tissue Engineering Scaffolds.
In: Materials, 2020, 13 (8)
doi: 10.26083/tuprints-00016618
Article, Secondary publication, Publisher's Version

Jaeger, Jeannine ; Groher, Florian ; Stamm, Jacqueline ; Spiehl, Dieter ; Braun, Johannes ; Dörsam, Edgar ; Suess, Beatrix (2023)
Characterization and Inkjet Printing of an RNA Aptamer for Paper-Based Biosensing of Ciprofloxacin.
In: Biosensors, 2019, 9 (1)
doi: 10.26083/tuprints-00016878
Article, Secondary publication, Publisher's Version

Friesen, John ; Rausch, Lea ; Pelz, Peter F. ; Fürnkranz, Johannes (2023)
Determining Factors for Slum Growth with Predictive Data Mining Methods.
In: Urban Science, 2018, 2 (3)
doi: 10.26083/tuprints-00016703
Article, Secondary publication, Publisher's Version

Treffeisen, Torben ; Henk, Andreas (2023)
Faults as Volumetric Weak Zones in Reservoir-Scale Hydro-Mechanical Finite Element Models — A Comparison Based on Grid Geometry, Mesh Resolution and Fault Dip.
In: Energies, 2020, 13 (10)
doi: 10.26083/tuprints-00016987
Article, Secondary publication, Publisher's Version

Bermúdez Agudelo, María Catalina ; Hampe, Manfred ; Reiber, Thorsten ; Abele, Eberhard (2023)
Investigation of Porous Metal-Based 3D-Printed Anode GDLs for Tubular High Temperature Proton Exchange Membrane Fuel Cells.
In: Materials, 2020, 13 (9)
doi: 10.26083/tuprints-00016630
Article, Secondary publication, Publisher's Version

Blinn, Bastian ; Klein, Marcus ; Gläßner, Christopher ; Smaga, Marek ; Aurich, Jan ; Beck, Tilmann (2023)
An Investigation of the Microstructure and Fatigue Behavior of Additively Manufactured AISI 316L Stainless Steel with Regard to the Influence of Heat Treatment.
In: Metals, 2018, 8 (4)
doi: 10.26083/tuprints-00017114
Article, Secondary publication, Publisher's Version

Heinrich, Arne ; Kuenne, Guido ; Ganter, Sebastian ; Hasse, Christian ; Janicka, Johannes (2023)
Investigation of the Turbulent Near Wall Flame Behavior for a Sidewall Quenching Burner by Means of a Large Eddy Simulation and Tabulated Chemistry.
In: Fluids, 2018, 3 (3)
doi: 10.26083/tuprints-00016710
Article, Secondary publication, Publisher's Version

Wang, Yongqi ; Hutter, Kolumban (2023)
Phenomenological Thermodynamics of Irreversible Processes.
In: Entropy, 2018, 20 (6)
doi: 10.26083/tuprints-00016805
Article, Secondary publication, Publisher's Version

Shamooni, Ali ; Cuoci, Alberto ; Faravelli, Tiziano ; Sadiki, Amsini (2023)
Prediction of Combustion and Heat Release Rates in Non-Premixed Syngas Jet Flames Using Finite-Rate Scale Similarity Based Combustion Models.
In: Energies, 2018, 11 (9)
doi: 10.26083/tuprints-00016712
Article, Secondary publication, Publisher's Version

Glücker, Philipp ; Kivekäs, Klaus ; Vepsäläinen, Jari ; Mouratidis, Panagiotis ; Schneider, Maximilian ; Rinderknecht, Stephan ; Tammi, Kari (2023)
Prolongation of Battery Lifetime for Electric Buses through Flywheel Integration.
In: Energies, 2021, 14 (4)
doi: 10.26083/tuprints-00017803
Article, Secondary publication, Publisher's Version

Wang, Chun ; Ye, Guanlin ; Meng, Xiannan ; Wang, Yongqi ; Peng, Chong (2023)
A Eulerian−Lagrangian Coupled Method for the Simulation of Submerged Granular Column Collapse.
In: Journal of Marine Science and Engineering, 2021, 9 (6)
doi: 10.26083/tuprints-00019568
Article, Secondary publication, Publisher's Version

Foret, Jonas ; Franke, Daniel ; Klausmann, Fabian ; Schneider, Alexandra ; Schiffer, Heinz-Peter ; Becker, Bernd ; Müller, Hauke (2023)
Experimental Aerodynamic and Aeroelastic Investigation of a Highly-Loaded 1.5-Stage Transonic Compressor with Tandem Stator.
In: International Journal of Turbomachinery, Propulsion and Power, 2021, 6 (3)
doi: 10.26083/tuprints-00019612
Article, Secondary publication, Publisher's Version

Franke, Daniel ; Möller, Daniel ; Jüngst, Maximilian ; Schiffer, Heinz-Peter ; Giersch, Thomas ; Becker, Bernd (2023)
Experimental Aerodynamic and Aeroelastic Investigation of a Transonic Compressor Rotor with Reduced Blade Count.
In: International Journal of Turbomachinery, Propulsion and Power, 2021, 6 (2)
doi: 10.26083/tuprints-00019582
Article, Secondary publication, Publisher's Version

Rehm, Imke-Sophie ; Friesen, John ; Pouls, Kevin ; Busch, Christoph ; Taubenböck, Hannes ; Pelz, Peter F. (2023)
A Method for Modeling Urban Water Infrastructures Combining Geo-Referenced Data.
In: Water, 2021, 13 (16)
doi: 10.26083/tuprints-00019608
Article, Secondary publication, Publisher's Version

Datta, Ranajay ; Yelash, Leonid ; Schmid, Friederike ; Kummer, Florian ; Oberlack, Martin ; Lukáčová-Medvid’ová, Mária ; Virnau, Peter (2023)
Shear-Thinning in Oligomer Melts - Molecular Origins and Applications.
In: Polymers, 2021, 13 (16)
doi: 10.26083/tuprints-00019574
Article, Secondary publication, Publisher's Version

Izdebska-Podsiadły, Joanna ; Trokowska, Paula ; Dörsam, Edgar (2023)
Aging of Polylactide Films Exposed to Plasma — Hydrophobic Recovery and Selected Application Properties.
In: Applied Sciences, 2023, 13 (5)
doi: 10.26083/tuprints-00023342
Article, Secondary publication, Publisher's Version

Middendorf, Moritz ; Umbach, Cristin ; Böhm, Stefan ; Liu, Jia ; Middendorf, Bernhard (2023)
Comparative Study of 2D Petrographic and 3D X-ray Tomography Investigations of Air Voids in Asphalt.
In: Materials, 2023, 16 (3)
doi: 10.26083/tuprints-00023345
Article, Secondary publication, Publisher's Version

Hübsch, Jan David ; Demleitner, Martin ; Bard, Simon ; Berendes, Philipp ; Altstädt, Volker ; Mittelstedt, Christian (2023)
Influence of Skydrol immersion at elevated temperatures on the thermo‐mechanical properties of a high‐Tg anhydride epoxy resin toughened with a hydroxy‐terminated polyester.
In: Journal of Applied Polymer Science, 2023, 140 (1)
doi: 10.26083/tuprints-00023741
Article, Secondary publication, Publisher's Version

Fritschen, Anna ; Acedo Mestre, Mariana ; Scholpp, Sebastian ; Blaeser, Andreas (2023)
Influence of the physico-chemical bioink composition on the printability and cell biological properties in 3D-bioprinting of a liver tumor cell line.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00023358
Article, Secondary publication, Publisher's Version

Husung, Stephan ; Koch, Yanik ; Welzbacher, Peter ; Kraus, Benjamin ; Roehnert, Felix ; Faheem, Faizan ; Kirchner, Eckhard (2023)
Systemic Conception of the Data Acquisition of Digital Twin Solutions for Use Case-Oriented Development and Its Application to a Gearbox.
In: Systems, 2023, 11 (5)
doi: 10.26083/tuprints-00024093
Article, Secondary publication, Publisher's Version

Galetzka, Armin ; Loukrezis, Dimitrios ; Georg, Niklas ; De Gersem, Herbert ; Römer, Ulrich (2023)
An hp‐adaptive multi‐element stochastic collocation method for surrogate modeling with information re‐use.
In: International Journal for Numerical Methods in Engineering, 2023, 124 (12)
doi: 10.26083/tuprints-00024293
Article, Secondary publication, Publisher's Version

Bodner, Jonas ; Koksharov, Josefine ; Dammel, Frank ; Stephan, Peter (2023)
Analysis of low‐temperature pumped thermal energy storage systems based on a transcritical CO₂ charging process.
In: Energy Science & Engineering, 2023, 11 (9)
doi: 10.26083/tuprints-00024677
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Bütev Öcal, Ezgi ; Groche, Peter (2023)
A Comparative Study on the Production of a Hat Profile by Roll Forming and Stamping.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024698
Article, Secondary publication, Publisher's Version

Sellner, Erik ; Xu, Yikai ; Groche, Peter (2023)
Extension of Process Limits in High‐Strength Aluminum Forming by Local Contact Heating.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024663
Article, Secondary publication, Publisher's Version

Kühn, Annalena ; Haugwitz, Christoph ; Hinrichs, Jan ; Kupnik, Mario ; Lange, Jörg (2023)
Investigating the impact of thermal stresses on blistering effects in sandwich panels.
In: ce/papers : Proceedings in civil engineering, 2023, 6 (3-4)
doi: 10.26083/tuprints-00024705
Article, Secondary publication, Publisher's Version

Schell, Lukas ; Sellner, Erik ; Massold, Michael ; Groche, Peter (2023)
Tribology in Warm and Hot Aluminum Sheet Forming: Transferability of Strip Drawing Tests to Forming Trials.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024667
Article, Secondary publication, Publisher's Version

Zöller, Ilka ; Bechmann, Roman ; Abendroth, Bettina (2023)
Possible applications for gestures while driving.
In: Automotive and Engine Technology, 2018, 3 (1-2)
doi: 10.26083/tuprints-00024591
Article, Secondary publication, Postprint

Fecher, Norbert ; Hoffmann, Jens ; Winner, Hermann ; Fuchs, Klaus ; Abendroth, Bettina ; Bruder, Ralph (2023)
Aktive Gefahrenbremsungen - wie reagiert das Fahrer-Fahrzeug-System?
In: ATZ - Automobiltechnische Zeitschrift, 2009, 111 (2)
doi: 10.26083/tuprints-00024586
Article, Secondary publication, Postprint

Zöller, Ilka ; Mautes, Nicole ; Ren, Wen ; Abendroth, Bettina (2023)
Knowledge Base for Valid Driving Simulation.
In: ATZ Worldwide, 2015, 117 (3)
doi: 10.26083/tuprints-00024581
Article, Secondary publication, Postprint

Abendroth, Bettina ; Schreiber, Michael ; Maul, Daniel ; Maul, Stefan ; Bruder, Ralph (2023)
Neue Ansätze zur Beurteilung der Fahrsimulatorvalidität.
In: Zeitschrift für Arbeitswissenschaft, 2012, 66 (1)
doi: 10.26083/tuprints-00024615
Article, Secondary publication, Postprint

Walter, Jonas ; Abendroth, Bettina (2023)
On the role of informational privacy in connected vehicles: A privacy-aware acceptance modelling approach for connected vehicular services.
In: Telematics and Informatics, 2020, 49
doi: 10.26083/tuprints-00024582
Article, Secondary publication, Postprint

Megahed, Sandra ; Krämer, Karl Michael ; Kontermann, Christian ; Heinze, Christoph ; Udoh, Annett ; Weihe, Stefan ; Oechsner, Matthias (2023)
Micro-Twinning in IN738LC Manufactured with Laser Powder Bed Fusion.
In: Materials, 2023, 16 (17)
doi: 10.26083/tuprints-00024497
Article, Secondary publication, Publisher's Version

Klinge, Lina ; Kluy, Lukas ; Spiegel, Christopher ; Siemers, Carsten ; Groche, Peter ; Coraça-Huber, Débora (2023)
Nanostructured Ti-13Nb-13Zr alloy for implant application — material scientific, technological, and biological aspects.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00024504
Article, Secondary publication, Publisher's Version

Hohmann, Nikolas ; Brulin, Sebastian ; Adamy, Jürgen ; Olhofer, Markus (2023)
Three-Dimensional Urban Path Planning for Aerial Vehicles Regarding Many Objectives.
In: IEEE Open Journal of Intelligent Transportation Systems, 2023, 4
doi: 10.26083/tuprints-00024467
Article, Secondary publication, Publisher's Version

Steinhausen, Christoph ; Gerber, Valerie ; Stierle, Rolf ; Preusche, Andreas ; Dreizler, Andreas ; Gross, Joachim ; Weigand, Bernhard ; Lamanna, Grazia (2023)
Characterisation of the transient mixing behaviour of evaporating near-critical droplets.
In: Frontiers in Physics, 2023, 11
doi: 10.26083/tuprints-00024423
Article, Secondary publication, Publisher's Version

Treffert, Franziska ; Curry, Chandra B. ; Ditmire, Todd ; Glenn, Griffin D. ; Quevedo, Hernan J. ; Roth, Markus ; Schoenwaelder, Christopher ; Zimmer, Marc ; Glenzer, Siegfried H. ; Gauthier, Maxence (2023)
Correction: Treffert et al. Towards High-Repetition-Rate Fast Neutron Sources Using Novel Enabling Technologies. Instruments 2021, 5, 38.
In: Instruments, 2023, 7 (3)
doi: 10.26083/tuprints-00024411
Article, Secondary publication, Publisher's Version

Knüppel, Finn ; Sun, Ang ; Wurm, Frank-Hendrik ; Hussong, Jeanette ; Torner, Benjamin (2023)
Effect of Particle Migration on the Stress Field in Microfluidic Flows of Blood Analog Fluids at High Reynolds Numbers.
In: Micromachines, 2023, 14 (8)
doi: 10.26083/tuprints-00024409
Article, Secondary publication, Publisher's Version

Patanè, Luca ; Zhao, Guoping (2023)
Editorial: Focus on methods: neural algorithms for bio-inspired robotics.
In: Frontiers in Neurorobotics, 2023, 17
doi: 10.26083/tuprints-00024404
Article, Secondary publication, Publisher's Version

Kang, Sangjun ; Wang, Di ; Caron, Arnaud ; Minnert, Christian ; Durst, Karsten ; Kübel, Christian ; Mu, Xiaoke (2023)
Direct Observation of Quadrupolar Strain Fields forming a Shear Band in Metallic Glasses.
In: Advanced Materials, 2023, 35 (25)
doi: 10.26083/tuprints-00024301
Article, Secondary publication, Publisher's Version

Faust, Erik ; Steinmetz, Felix ; Schlüter, Alexander ; Müller, Henning ; Müller, Ralf (2023)
Modelling transient stresses in dynamically loaded elastic solids using the Lattice Boltzmann Method.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (1)
doi: 10.26083/tuprints-00024294
Article, Secondary publication, Publisher's Version

Ratschow, Aaron D. ; Stein, Sigrun ; Gross, Hans‐Jürgen (2023)
Charge distribution in turbulent flow of charged liquid — Modeling and experimental validation.
In: Process Safety Progress, 2023, 42 (2)
doi: 10.26083/tuprints-00024306
Article, Secondary publication, Publisher's Version

Kappel, Andreas ; Mittelstedt, Christian (2023)
Computational model for the semi‐analytical assessment of the free‐edge effect in composite laminated shells.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (1)
doi: 10.26083/tuprints-00024302
Article, Secondary publication, Publisher's Version

Hallas, Martin ; Neumann, Claus ; Hinrichsen, Volker ; Gross, Detlev (2023)
Commissioning and Service Experience With a ±550 kV DC GIL Conducted in Frame of a CIGRE Prototype Installation Test.
In: IEEE Transactions on Power Delivery, 2023, 38 (4)
doi: 10.26083/tuprints-00024373
Article, Secondary publication, Postprint

Metternich, Joachim ; Kreß, Antonio (2023)
Digital-based production: introduction and fields of application.
In: Production Engineering, 2023, 17 (2)
doi: 10.26083/tuprints-00024359
Article, Secondary publication, Publisher's Version

Kreß, Antonio ; Metternich, Joachim (2023)
Optimierte Auswahl von Fabrikelementen.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2023, 118 (3)
doi: 10.26083/tuprints-00024358
Article, Secondary publication, Publisher's Version

Fritschen, Anna ; Blaeser, Andreas (2023)
Biosynthetic, biomimetic, and self-assembled vascularized Organ-on-a-Chip systems.
In: Biomaterials, 2021, 268
doi: 10.26083/tuprints-00024336
Article, Secondary publication, Postprint

Ahmadi Tighchi, Hashem ; Kayhani, Mohammad Hasan ; Faezian, Ali ; Yeganehzad, Samira ; Miller, Reinhard (2023)
Examination of a Theoretical Model for Drainage of Foams Prepared from Licorice Root Extract Solution.
In: Colloids and Interfaces, 2023, 7 (2)
doi: 10.26083/tuprints-00024247
Article, Secondary publication, Publisher's Version

Jazayeri, Seyedsajjad ; Pourahmad, Afham ; Abdollahi, Seyyed Amirreza ; Hassanvand, Amin ; Alobaid, Falah ; Aghel, Babak (2023)
Experimental Investigation and CFD Simulation of Cryogenic Condenser.
In: Processes, 2023, 11 (6)
doi: 10.26083/tuprints-00024254
Article, Secondary publication, Publisher's Version

Volz, Lennart ; Reidel, Claire-Anne ; Durante, Marco ; Prezado, Yolanda ; Schuy, Christoph ; Weber, Uli ; Graeff, Christian (2023)
Investigating Slit-Collimator-Produced Carbon Ion Minibeams with High-Resolution CMOS Sensors.
In: Instruments, 2023, 7 (2)
doi: 10.26083/tuprints-00024251
Article, Secondary publication, Publisher's Version

Goedderz, Daniela ; Weber, Lais ; Markert, Daniel ; Schießer, Alexander ; Fasel, Claudia ; Riedel, Ralf ; Altstädt, Volker ; Bethke, Christian ; Fuhr, Olaf ; Puchtler, Florian ; Breu, Josef ; Döring, Manfred (2023)
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent.
In: Journal of Applied Polymer Science, 2020, 137 (1)
doi: 10.26083/tuprints-00024255
Article, Secondary publication, Postprint

Singh, Soumya ; Ebongue, Yvonne Eboumbou ; Rezaei, Shahed ; Birke, Kai Peter (2023)
Hybrid Modeling of Lithium-Ion Battery: Physics-Informed Neural Network for Battery State Estimation.
In: Batteries, 2023, 9 (6)
doi: 10.26083/tuprints-00024089
Article, Secondary publication, Publisher's Version

Camazzola, Gianmarco ; Boscolo, Daria ; Scifoni, Emanuele ; Dorn, Alexander ; Durante, Marco ; Krämer, Michael ; Abram, Valentino ; Fuss, Martina C. (2023)
TRAX-CHEMxt: Towards the Homogeneous Chemical Stage of Radiation Damage.
In: International Journal of Molecular Sciences, 2023, 24 (11)
doi: 10.26083/tuprints-00024090
Article, Secondary publication, Publisher's Version

Schwindt, Sarah ; Theobald, Nina ; Abendroth, Bettina ; Manstetten, Dietrich (2023)
Anforderungen älterer Fahrender an das HMI automatisierter Fahrzeuge.
In: ATZ - Automobiltechnische Zeitschrift, 2022, 124
doi: 10.26083/tuprints-00024066
Article, Secondary publication, Postprint

Azambuja, Antonio João Gonçalves de ; Plesker, Christian ; Schützer, Klaus ; Anderl, Reiner ; Schleich, Benjamin ; Almeida, Vilson Rosa (2023)
Artificial Intelligence-Based Cyber Security in the Context of Industry 4.0 — A Survey.
In: Electronics, 2023, 12 (8)
doi: 10.26083/tuprints-00023791
Article, Secondary publication, Publisher's Version

Reichel, Maximilian ; Schröder, Jörg ; Xu, Bai-Xiang (2023)
Efficient micromagnetic finite element simulations using a perturbed Lagrange multiplier method.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023680
Article, Secondary publication, Publisher's Version

Stysch, Jonathan ; Klaedtke, Andreas ; De Gersem, Herbert ; Aichele, Hermann (2023)
Efficient sensitivity analysis of lumped elements with respect to finite‐element geometry changes.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2022, 36 (3)
doi: 10.26083/tuprints-00023700
Article, Secondary publication, Publisher's Version

Sharifi Ghalehnoei, Mohammadsina ; Javanmardi, Ahad ; Izadifar, Mohammadreza ; Ukrainczyk, Neven ; Koenders, Eduardus (2023)
Finite Element Analysis of Shear Reinforcing of Reinforced Concrete Beams with Carbon Fiber Reinforced Polymer Grid-Strengthened Engineering Cementitious Composite.
In: Buildings, 2023, 13 (4)
doi: 10.26083/tuprints-00023790
Article, Secondary publication, Publisher's Version

Rust, Christian ; Shapturenka, Pavel ; Spari, Manuel ; Jin, Qihao ; Li, Han ; Bacher, Andreas ; Guttmann, Markus ; Zheng, Ming ; Adel, Tehseen ; Hight Walker, Angela R. ; Fagan, Jeffrey A. ; Flavel, Benjamin S. (2023)
The Impact of Carbon Nanotube Length and Diameter on their Global Alignment by Dead‐End Filtration.
In: Small : nano micro, 2023, 19 (10)
doi: 10.26083/tuprints-00023701
Article, Secondary publication, Publisher's Version

Ebrahem, Adnan ; Hiemstra, René R. ; Stoter, Stein K. F. ; Schillinger, Dominik (2023)
Modeling of Growth using an Immersed Finite Element Method.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023689
Article, Secondary publication, Publisher's Version

Iankevich, Gleb ; Sarkar, Abhishek ; Katnagallu, Shyam ; Chellali, Mohammed Reda ; Wang, Di ; Velasco, Leonardo ; Singh, Ruby ; Reisinger, Thomas ; Kruk, Robert ; Hahn, Horst (2023)
A New Class of Cluster-Matrix Nanocomposite Made of Fully Miscible Components.
In: Advanced Materials, 2023, 35 (9)
doi: 10.26083/tuprints-00023708
Article, Secondary publication, Publisher's Version

Harandi, Ali ; Tabib, Majd ; Alatassi, Baker ; Brepols, Tim ; Rezaei, Shahed ; Reese, Stefanie (2023)
A comparative study between phase‐field and micromorphic gradient‐extended damage models for brittle fracture.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023693
Article, Secondary publication, Publisher's Version

Henkel, Marvin‐Lucas ; Kasolis, Fotios ; Schöps, Sebastian ; Clemens, Markus (2023)
A comparative study on electromagnetic quasistatic time‐domain field calculations.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2021, 36 (3)
doi: 10.26083/tuprints-00023681
Article, Secondary publication, Publisher's Version

Methfessel, Thomas S. ; Becker, Wilfried (2023)
A geometrical parameter study of the analytical stress calculation in adhesive joints with thick bonding layers.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023710
Article, Secondary publication, Publisher's Version

Georges, Hussam ; Mittelstedt, Christian ; Becker, Wilfried (2023)
Analysis of strut‐based lattice cores in sandwich panels using homogenization and dehomogenization methods.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023744
Article, Secondary publication, Publisher's Version

Xiu, Yanlei ; Mauri, Anna ; Dinda, Sirshendu ; Pramudya, Yohanes ; Ding, Ziming ; Diemant, Thomas ; Sarkar, Abhishek ; Wang, Liping ; Li, Zhenyou ; Wenzel, Wolfgang ; Fichtner, Maximilian ; Zhao‐Karger, Zhirong (2023)
Anion Storage Chemistry of Organic Cathodes for High‐Energy and High‐Power Density Divalent Metal Batteries.
In: Angewandte Chemie International Edition, 2023, 62 (2)
doi: 10.26083/tuprints-00023697
Article, Secondary publication, Publisher's Version

Xiu, Yanlei ; Mauri, Anna ; Dinda, Sirshendu ; Pramudya, Yohanes ; Ding, Ziming ; Diemant, Thomas ; Sarkar, Abhishek ; Wang, Liping ; Li, Zhenyou ; Wenzel, Wolfgang ; Fichtner, Maximilian ; Zhao‐Karger, Zhirong (2023)
Anionen‐Einlagerungschemie organischer Kathoden für zweiwertige Metallbatterien mit hoher Energie und hoher Leistungsdichte.
In: Angewandte Chemie, 2023, 135 (2)
doi: 10.26083/tuprints-00023728
Article, Secondary publication, Publisher's Version