Items where Subject is "600 Technology, medicine, applied sciences > 620 Engineering and machine engineering"
Up a level |
- DDC Subject Categories (3574)
- 600 Technology, medicine, applied sciences (3574)
- 620 Engineering and machine engineering (3574)
- 600 Technology, medicine, applied sciences (3574)
2025
Ramognino, Federico ; Sforza, Lorenzo ; Lucchini, Tommaso ; Welch, Cooper ; Böhm, Benjamin ; Onorati, Angelo (2025)
A CFD ignition model to predict average-cycle combustion in SI engines with extreme EGR levels.
In: International Journal of Engine Research, 2024, 25 (5)
doi: 10.26083/tuprints-00027273
Article, Secondary publication, Publisher's Version
Lien, Hao-Pin ; Welch, Cooper ; Li, Yongxiang ; Pati, Andrea ; Hasenzahl, Max ; Sadiki, Amsini ; Böhm, Benjamin ; Hasse, Christian (2025)
Spray formation and spray-wall-flow interaction in a gasoline direct-injection (GDI) engine under early-injection conditions: A flow bench study.
In: International Journal of Engine Research, 2024, 25 (8)
doi: 10.26083/tuprints-00027895
Article, Secondary publication, Publisher's Version
Broese, Carsten ; Tsakmakis, Charalampos ; Üngör, Özer (2025)
Consistent Euler–Bernoulli beam theory in statics for gradient elasticity based on Laplacians of stress and strain.
In: Mathematics and Mechanics of Solids, 2024, 29 (1)
doi: 10.26083/tuprints-00027141
Article, Secondary publication, Publisher's Version
2024
Simon, Henrik (2024)
Fusion von Zeitreihen- und Ereignisdaten zur Optimierung der Zustandsdiagnose technischer Systeme.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028801
Ph.D. Thesis, Primary publication, Publisher's Version
Kuhn, Alexander ; Langner, Eric ; Hülsbruch, Dennis ; Kallio, Emmi ; Soderholm, Alexander ; Barišić, Vesna ; Ströhle, Jochen ; Epple, Bernd (2024)
Experimental Investigation of Combustion Characteristics During Co-Combustion of Solid Recovered Fuel and Coal in a 1 MWth Circulating Fluidized Bed Reactor.
14th European Conference on Industrial Furnaces and Boilers (INFUB-14). Algarve, Portugal (02.04.2024-05.04.2024)
doi: 10.26083/tuprints-00028832
Conference or Workshop Item, Primary publication, Publisher's Version
Yan, Sikang (2024)
A phase field model for cyclic fatigue.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028817
Ph.D. Thesis, Primary publication, Publisher's Version
Al Khalili, MHD Yassin (2024)
Content-Aware Adaptation Of Point Cloud Streams: A Model-based Perspective on Processing of Point Cloud Streams.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028630
Ph.D. Thesis, Primary publication, Publisher's Version
Kluy, Lukas (2024)
Nanostrukturierung von Titanlegierungen durch thermomechanische Prozessketten: Methodik und Anwendung für medizinische Implantate.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028807
Ph.D. Thesis, Primary publication, Publisher's Version
Sartorius, Julian (2024)
3D-Charakterisierung von Washcoatschichten für die Simulation von Reaktion-Diffusionsprozessen in Ammoniakschlupfkatalysatoren.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028683
Ph.D. Thesis, Primary publication, Publisher's Version
Borchardt, Steve (2024)
Entwicklung und Anwendung eines Prüfverfahrens zur energetischen und hydraulischen Bewertung von Wärmeübertragern in Wasserkörpern.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028816
Ph.D. Thesis, Primary publication, Publisher's Version
Jeßberger, Julia (2024)
Schadensanalyse am Planetengetriebe bei Fragmenteinbringung mit Hilfe numerischer Modellbildung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028723
Ph.D. Thesis, Primary publication, Publisher's Version
Harries, Leandro ; Kempf, David ; Scheidig, Matthias ; Schütz, Maximilan ; Middendorf, Moritz ; Uzar, Kazim ; Su, Xiaohui ; Böhm, Stefan ; Liu, Jia (2024)
Assessing Asphalt Pavement Pre-Compaction with Paver Screed Frequency Measurements.
In: Procedia Structural Integrity, 2024, 64
doi: 10.26083/tuprints-00028822
Article, Secondary publication, Publisher's Version
Scheidig, Matthias ; Uzar, Kazim ; Kempf, David ; Harries, Leandro ; Böhm, Stefan ; Liu, Jia (2024)
Load-Bearing Capacity Assessment of Traffic Superstructures for Roads and Tramways.
In: Procedia Structural Integrity, 2024, 64
doi: 10.26083/tuprints-00028823
Article, Secondary publication, Publisher's Version
Schneider, Henrik (2024)
Advanced optical laser diagnostics for oxy-fuel biomass combustion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028620
Ph.D. Thesis, Primary publication, Publisher's Version
Gazenbiller, Eugen ; Arya, Visheet ; Reitz, Rüdiger ; Oechsner, Matthias ; Zheludkevich, Mikhail L. ; Höche, Daniel (2024)
Mechanistic insights into chemical corrosion of AA1050 in ethanol‐blended fuels with water contamination via phase field modeling.
In: Materials and Corrosion = Werkstoffe und Korrosion, 2024, 75 (9)
doi: 10.26083/tuprints-00028270
Article, Secondary publication, Publisher's Version
Ahmels, Laura ; Bruns, Sebastian ; Durst, Karsten ; Bruder, Enrico (2024)
Observation of Grain Boundary Sliding in a Lamellar Ultrafine‐Grained Steel.
In: Advanced Engineering Materials, 2024, 26 (19)
doi: 10.26083/tuprints-00028271
Article, Secondary publication, Publisher's Version
Gehb, Christopher M. ; Platz, Roland ; Melz, Tobias (2024)
Approach to prevent locking in a spring-damper system by adaptive load redistribution in auxiliary kinematic guidance elements.
SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. San Diego, California, United States (08.03.2015-12.03.2015)
doi: 10.26083/tuprints-00028724
Conference or Workshop Item, Secondary publication, Publisher's Version
Hesseler, Jan ; Baumgartner, Jörg ; Bleicher, Christoph (2024)
Consideration of the transient material behavior under variable amplitude loading in the fatigue assessment of nodular cast iron using the strain‐life approach.
In: Fatigue & Fracture of Engineering Materials & Structures, 2021, 44 (10)
doi: 10.26083/tuprints-00028123
Article, Secondary publication, Publisher's Version
Diederich, Malte (2024)
Die Rolle impliziter Fähigkeitstheorien in der MINT-Studieneingangsphase: Deskriptive Analysen und Beeinflussung durch eine Online-Intervention.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028673
Ph.D. Thesis, Primary publication, Publisher's Version
Fass, Markus ; Hecht, Matthias ; Baumgartner, Jörg ; Bauer, Niklas (2024)
Evaluation of the approach based on the maximum principal stress from the IIW-Recommendation for welded joints under proportional, multiaxial stress states.
In: Welding in the World, 2023, 67 (10)
doi: 10.26083/tuprints-00028121
Article, Secondary publication, Publisher's Version
Bauer, N. M. ; Baumgartner, J. ; Fass, M. (2024)
Fatigue life evaluation of welded joints under multiaxial loading for different stress concepts using an extended Gough-Pollard criterion.
In: Welding in the World, 2024, 68 (8)
doi: 10.26083/tuprints-00028120
Article, Secondary publication, Publisher's Version
Baumgartner, Jörg ; Tillmann, Wolfgang ; Bobzin, Kirsten ; Öte, Mehmet ; Wiesner, Stefanie ; Sievers, Norman (2024)
Fatigue of brazed joints made of X5CrNi18-10 and Cu110 and derivation of reliable assessment approaches.
In: Welding in the World : The International Journal of Materials Joining, 2020, 64
doi: 10.26083/tuprints-00028118
Article, Secondary publication, Publisher's Version
Hensel, J. ; Köhler, M. ; Uhlenberg, L. ; Castro, J. Diniz e ; Dilger, K. ; Faß, M. ; Baumgartner, J. (2024)
Laser welding of 16MnCr5 butt welds with gap: resulting weld quality and fatigue strength assessment.
In: Welding in the World, 2022, 66 (9)
doi: 10.26083/tuprints-00028122
Article, Secondary publication, Publisher's Version
Hofmann, Marius ; Faß, Markus ; Eberhard, Andrea ; Klein, Macus ; Baumgartner, Jörg ; Oechsner, Matthias ; Melz, Tobias (2024)
Method of accumulation of preload loss of bolted joints due to rotational self-loosening caused by cyclic, transversal excitation.
In: Engineering Failure Analysis, 2024, 162
doi: 10.26083/tuprints-00028114
Article, Secondary publication, Publisher's Version
He, Ping (2024)
Overall evaluation of drive-off procedures in a mild hybrid powertrain.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028793
Ph.D. Thesis, Primary publication, Publisher's Version
Faridi, Fahd Rushd (2024)
Pulsed Free Space Photonic Vector Network Analyzers.
doi: 10.26083/tuprints-00028781
Book, Primary publication, Publisher's Version
Fang, Xufei (2024)
Room-temperature Dislocations in Ceramics: Engineering, Mechanism, and Application.
Universitäts- und Landesbibliothek Darmstadt, 2024
doi: 10.26083/tuprints-00027351
Habilitation, Secondary publication, Publisher's Version
Wouw, Jonathan van de (2024)
Aerothermal Impact of Time-Resolved Inlet Boundary Conditions in High-Pressure Turbine Simulations.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028652
Ph.D. Thesis, Primary publication, Publisher's Version
Puchtler, Steffen ; Kuip, Julius van der ; Becker-Dombrowsky, Florian Michael ; Kirchner, Eckhard (2024)
Impedance measurement of rolling bearings using an unbalanced AC wheatstone bridge.
In: Frontiers in Mechanical Engineering, 2024, 10
doi: 10.26083/tuprints-00028785
Article, Secondary publication, Publisher's Version
Lenchuk, Olena ; Rohrer, Jochen ; Albe, Karsten (2024)
Mo–Si Alloys Studied by Atomistic Computer Simulations Using a Novel Machine‐Learning Interatomic Potential: Thermodynamics and Interface Phenomena.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028276
Article, Secondary publication, Publisher's Version
Arya, V. ; Gazenbiller, E. ; Reitz, R. ; Oechsner, M. ; Höche, D. (2024)
Evaluation of innovative microreactor for examination of alkoxide pitting corrosion and data generation for numerical transient model.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2024, 55 (3)
doi: 10.26083/tuprints-00028283
Article, Secondary publication, Publisher's Version
Bernauer, Jan ; Kredel, Samuel Aeneas ; Ionescu, Emanuel ; Riedel, Ralf (2024)
Polymer‐Derived Ceramic Coatings with Excellent Thermal Cycling Stability.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028280
Article, Secondary publication, Publisher's Version
Fathidoost, Mozhdeh ; Yang, Yangyiwei ; Thor, Nathalie ; Bernauer, Jan ; Pundt, Astrid ; Riedel, Ralf ; Xu, Bai‐Xiang (2024)
Thermal Conductivity Analysis of Polymer‐Derived Nanocomposite via Image‐Based Structure Reconstruction, Computational Homogenization, and Machine Learning.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028282
Article, Secondary publication, Publisher's Version
Blat Belmonte, Benjamin (2024)
Ökonomische Optimierung der Ladestrategie für Elektrobusflotten unter Teilnahme am Strommarkt.
doi: 10.26083/tuprints-00027836
Book, Secondary publication, Publisher's Version
Steffan, Kay-Eric Werner Heinz (2024)
Ein Beitrag zur potentialgetriebenen Fertigungsmaschinenentwicklung am Beispiel einer hybrid-integrierenden additiven Fertigungsmaschine.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026524
Ph.D. Thesis, Primary publication, Publisher's Version
Ströter, Daniel (2024)
Massively Parallel Editing and Post-Processing of Unstructured Tetrahedral Meshes for Virtual Prototyping.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028110
Ph.D. Thesis, Primary publication, Publisher's Version
Kuhn, Carola ; Knapp, Anna ; Deutschmann, Max P. ; Spielmann, Jonas ; Tischer, Steffen ; Kramm, Ulrike I. ; Nirschl, Hermann ; Deutschmann, Olaf (2024)
Iron as Recyclable Metal Fuel: Unraveling Oxidation Behavior and Cyclization Effects Through Thermogravimetric Analysis, Wide‐Angle X‐ray Scattering and Mössbauer Spectroscopy.
In: ChemSusChem, 2024, 17 (15)
doi: 10.26083/tuprints-00028287
Article, Secondary publication, Publisher's Version
Filipovic, Jurica ; Beck, Katharina ; Kontermann, Christian ; Galetz, Mathias ; Oechsner, Matthias (2024)
Mechanical Characterization Potentials of Aluminide Diffusion Coatings on Molybdenum Substrates.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028290
Article, Secondary publication, Publisher's Version
Kannapinn, Maximilian ; Köhler, Felix ; Schäfer, Michael (2024)
A Validated Thermal Computational Fluid Dynamics Model of Wine Warming in a Glass.
In: Applied Sciences, 2024, 14 (19)
doi: 10.26083/tuprints-00028670
Article, Secondary publication, Publisher's Version
Kern, Andreas (2024)
Zur Lebensdauer-Bewertung additiv gefertigter Aluminium-Komponenten.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028146
Ph.D. Thesis, Primary publication, Publisher's Version
Li, Sushan ; Goetz, Benedict ; Schaeffner, Maximilian ; Platz, Roland (2024)
Approach to prove the efficiency of the Monte Carlo Method combined with the elementary effect method to quantify uncertainty of a beam structure with piezo-elastic supports.
2nd International Conference on Uncertainty Quantification in Computational Sciences and Engineering. Rhodes Island, Greece (15.06.2017-17.06.2017)
doi: 10.26083/tuprints-00028651
Conference or Workshop Item, Secondary publication, Publisher's Version
Kleinfeller, Nikolai ; Gehb, Christopher M. ; Schaeffner, Maximilian ; Adams, Christian ; Melz, Tobias (2024)
Assessment of Model Uncertainty in the Prediction of the Vibroacoustic Behavior of a Rectangular Plate by Means of Bayesian Inference.
4th International Conference on Uncertainty in Mechanical Engineering. virtual Conference (07.06.2021-08.06.2021)
doi: 10.26083/tuprints-00028119
Conference or Workshop Item, Secondary publication, Publisher's Version
Pondrom, P. ; Sessler, G. M. ; Bös, J. ; Melz, T. (2024)
Compact electret energy harvester with high power output.
In: Applied Physics Letters, 2016, 109 (5)
doi: 10.26083/tuprints-00028667
Article, Secondary publication, Publisher's Version
Hillenbrand, J. ; Pondrom, P. ; Sessler, G. M. (2024)
Electret transducer for vibration-based energy harvesting.
In: Applied Physics Letters, 2015, 106 (18)
doi: 10.26083/tuprints-00028663
Article, Secondary publication, Publisher's Version
Stender, Merten ; Adams, Christian ; Wedler, Mathies ; Grebel, Antje ; Hoffmann, Nobert (2024)
Explainable machine learning determines effects on the sound absorption coefficient measured in the impedance tube.
In: The Journal of the Acoustical Society of America, 2021, 149 (3)
doi: 10.26083/tuprints-00028662
Article, Secondary publication, Publisher's Version
Pondrom, P. ; Hillenbrand, J. ; Sessler, G. M. ; Bös, J. ; Melz, T. (2024)
Vibration-based energy harvesting with stacked piezoelectrets.
In: Applied Physics Letters, 2014, 104 (17)
doi: 10.26083/tuprints-00028666
Article, Secondary publication, Publisher's Version
Neubauer, Philipp ; Tschesche, Johannes ; Bös, Joachim ; Melz, Tobias ; Hanselka, Holger (2024)
An active-system approach for eliminating the wolf note on a cello.
In: The Journal of the Acoustical Society of America, 2018, 143 (5)
doi: 10.26083/tuprints-00028668
Article, Secondary publication, Publisher's Version
Hallas, Martin ; Moxter, Julian ; Hinrichsen, Volker ; Juhre, Karsten ; Tenzer, Michael (2024)
Experience Report of Potential Free Temperature Measurement with commercially available Pyrometers in gas insulated systems.
VDE Hochspannungstechnik 2022. Berlin, Germany (08.11.2022-10.11.2022)
doi: 10.26083/tuprints-00023106
Conference or Workshop Item, Secondary publication, Publisher's Version
Al-Baradoni, Nassr Mohammed Mosleh (2024)
Image-based and structure-integrated sensor for multiaxial measurement of structure deformations.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028657
Ph.D. Thesis, Primary publication, Publisher's Version
Rieckmann, Matthias (2024)
The Extended Discontinuous Galerkin Method for Evaporation and Contact Lines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028626
Ph.D. Thesis, Primary publication, Publisher's Version
Fang, Xufei ; Zhang, Jiawen ; Frisch, Alexander ; Preuß, Oliver ; Okafor, Chukwudalu ; Setvin, Martin ; Lu, Wenjun (2024)
Room‐temperature bulk plasticity and tunable dislocation densities in KTaO₃.
In: Journal of the American Ceramic Society, 2024, 107 (11)
doi: 10.26083/tuprints-00028296
Article, Secondary publication, Publisher's Version
Charton, Louis (2024)
System zur automatisierten Messung der
Kantenverrundung von Blechbauteilen mit
Mehrachs-Kinematik und Laserscanner.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028091
Bachelor Thesis, Primary publication, Publisher's Version
Sattler, Bernhard Jonathan ; Tundis, Andrea ; Friesen, John ; Pelz, Peter F. (2024)
Modeling Water Availability during a Blackout under Consideration of Uncertain Demand Response.
In: Engineering Proceedings, 2024, 69 (1)
doi: 10.26083/tuprints-00028216
Article, Secondary publication, Publisher's Version
Walther, Steffen ; Li, Tao ; Geyer, Dirk ; Dreizler, Andreas ; Böhm, Benjamin (2024)
Soot and Flame Structures in Turbulent Partially Premixed Jet Flames of Pre-Evaporated Diesel Surrogates with Admixture of OMEₙ.
In: Fluids, 2024, 9 (9)
doi: 10.26083/tuprints-00028215
Article, Secondary publication, Publisher's Version
Nugmanov, Dayan (2024)
Hybrid and ultrafine-grained materials produced by high pressure torsion extrusion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027755
Ph.D. Thesis, Primary publication, Publisher's Version
Volz, Stefan ; Launhardt, Jonas ; Groche, Peter (2024)
Advanced friction modelling in cold forging using machine learning.
57th International Cold Forging Group Plenary Meeting Proceeding (ICFG 2024). Busan, South Korea (22.09.2024-25.09.2024)
doi: 10.26083/tuprints-00028589
Conference or Workshop Item, Primary publication, Publisher's Version
Vandergrift, Jakob (2024)
Implicit Discontinuous Galerkin Shock Tracking Methods for Compressible Flows with Shocks.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028591
Ph.D. Thesis, Primary publication, Publisher's Version
Liu, Jun (2024)
Unstructured finite volume methods for two-phase flows with high density ratios.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028266
Ph.D. Thesis, Primary publication, Publisher's Version
Kleiner, Sven ; Bleisinger, Oliver ; Schleich, Benjamin ; Anderl, Reiner ; Steinbach, Tanja ; Röhm, Benjamin ; Karasek, Oliwia ; Arslanparcasi, Yusuf ; Chami, Mohammad ; Urbaszek, Albrecht ; Eßl, Günther ; Ćorić, Marko
eds.: Kleiner, Sven ; :em engineering methods AG (2024)
CyberTech – Advanced Systems Engineering für die Arbeitsgestaltung von Cyber-technischen Systemen.
doi: 10.26083/tuprints-00028310
Report, Primary publication, Publisher's Version
Prasad, Vignesh (2024)
Learning Human-Robot Interaction: A Case Study on Human-Robot Handshaking.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00019025
Ph.D. Thesis, Primary publication, Publisher's Version
Gao, Yanlong (2024)
Untersuchung von ergonomischen Haltungen der unteren Extremitäten hinsichtlich Pedalbetätigungen im Pkw.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028572
Ph.D. Thesis, Primary publication, Publisher's Version
Cui, Kai (2024)
Large-Scale Multi-Agent Reinforcement Learning via Mean Field Games.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028568
Ph.D. Thesis, Primary publication, Publisher's Version
Liu, Jia (2024)
Einfluss der Schienenbefestigungskomponenten auf das laterale Verformungs- und Lastverteilungsverhalten der Schiene.
doi: 10.26083/tuprints-00028576
Book, Secondary publication, Publisher's Version
Liu, Jia ; Böhm, Stefan ; Middendorf, Moritz (2024)
Erweiterte Schienenkompetenz an der Technischen Universität Darmstadt.
In: Deine Bahn, 2022, 50 (5)
doi: 10.26083/tuprints-00028562
Article, Secondary publication, Publisher's Version
Sun, Laura Luran (2024)
In-situ Tailoring of Functional Properties for the LPBF-Process of Pure Copper.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028404
Master Thesis, Primary publication, Publisher's Version
Schaub, Philipp Leander (2024)
Redundancy Analysis and Structured Control Design for Dynamic Systems Using Set-Theoretical Methods.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028171
Ph.D. Thesis, Primary publication, Publisher's Version
Haeckel, Tobias Maximilian (2024)
Die systemabhängige Pumpgrenze einer Radialverdichterstufe: Bestimmung und Einflussgrößen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027889
Ph.D. Thesis, Primary publication, Publisher's Version
Grammes, Thilo ; Limbach, René ; Bruns, Sebastian ; Wüllen, Leo van ; Ligny, Dominique de ; Kamitsos, Efstratios I. ; Durst, Karsten ; Wondraczek, Lothar ; Brauer, Delia S. (2024)
Tailoring the Mechanical Properties of Metaluminous Aluminosilicate Glasses by Phosphate Incorporation.
In: Frontiers in Materials, 2020, 7
doi: 10.26083/tuprints-00026699
Article, Secondary publication, Publisher's Version
Liu, Tianyi (2024)
A Parallel Successive Convex Approximation Framework with Smoothing Majorization for Phase Retrieval.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028201
Ph.D. Thesis, Primary publication, Publisher's Version
Heider, B. ; Oechsner, M. ; Reisgen, U. ; Ellermeier, J. ; Engler, T. ; Andersohn, G. ; Sharma, R. ; Gonzalez Olivares, E. ; Zokoll, E. (2024)
Corrosion Resistance and Microstructure of Welded Duplex Stainless Steel Surface Layers on Gray Cast Iron.
In: Journal of Thermal Spray Technology, 2020, 29 (4)
doi: 10.26083/tuprints-00024005
Article, Secondary publication, Publisher's Version
Recio Balmaseda, Sandra ; Karpowski, Tim Jeremy Patrick ; Nicolai, Hendrik ; Koob, Philipp ; Greifenstein, Max ; Dreizler, Andreas ; Hasse, Christian (2024)
Numerical Invenstigation of Effusion Cooling Air Influence on the CO Emissions for a Single-Sector Aero-Engine Model Combustor.
In: Journal of Engineering for Gas Turbines and Power, 2024, 146 (12)
doi: 10.26083/tuprints-00028126
Article, Secondary publication, Postprint
Middendorf, Moritz ; Umbach, Cristin ; Liu, Jia ; Koenders, Eduardus A. B. (2024)
Contact area analysis of an asphalt-concrete boundary layer with X-ray computed tomography imaging.
In: Construction and Building Materials, 2024, 430
doi: 10.26083/tuprints-00028163
Article, Secondary publication, Publisher's Version
Brötz, Johannes ; Schänzle, Christian ; Pelz, Peter F. (2024)
Exergy-Based Efficiency Assessment of Fans vs. Isentropic Efficiency.
In: International Journal of Turbomachinery, Propulsion and Power, 2023, 8 (4)
doi: 10.26083/tuprints-00026556
Article, Secondary publication, Publisher's Version
Nitsch, Antonia ; Leuthold, Julia ; Machaček, Jan ; Grandas Tavera, Carlos Eduardo (2024)
Experimental Investigations on Hydro-mechanical Processes in Reconstituted Clay Shale and Their Significance for Constitutive Modelling.
In: Rock Mechanics and Rock Engineering, 2023, 56 (4)
doi: 10.26083/tuprints-00026467
Article, Secondary publication, Publisher's Version
Kircher, Magnus ; Schneider, Jonathan ; Popp, Sebastian ; Gierth, Sandro ; Günther, Marco ; Hasse, Christian (2024)
Experimental and model-based analysis of combustion and auto-ignition of gasoline and three surrogate fuels in a single-cylinder research engine operated under knocking conditions.
In: International Journal of Engine Research, 2023, 24 (6)
doi: 10.26083/tuprints-00024040
Article, Secondary publication, Publisher's Version
Liu, Jia ; Freudenstein, Stephan (2024)
Investigations on ballastless tracks in tunnel without reinforcement.
In: Electronic Journal of Structural Engineering, 2013, 13 (1)
doi: 10.26083/tuprints-00028162
Article, Secondary publication, Publisher's Version
Harries, Leandro ; Schütz, Maximilian ; Kempf, David ; Liu, Jia (2024)
Methods of Asphalt Petrology: Determination of Permeability.
In: International Journal of Civil Infrastructure, 2023, 6
doi: 10.26083/tuprints-00028160
Article, Secondary publication, Publisher's Version
Noll, Dennis ; Hönicke, Philipp ; Kayser, Yves ; Wagner, Stefan ; Beckhoff, Burkhard ; Schwalke, Udo (2024)
Transfer-Free In Situ CCVD Grown Nanocrystalline Graphene for Sub-PPMV Ammonia Detection.
In: ECS Journal of Solid State Science and Technology, 2018, 7 (7)
doi: 10.26083/tuprints-00020384
Article, Secondary publication, Publisher's Version
Knoll, Maximilian (2024)
Grundlagen des Lochwalzens von ebenen Blechen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024512
Ph.D. Thesis, Primary publication, Publisher's Version
Weber, Markus (2024)
Schnelldrehende Motorspindelsysteme mit Synchronreluktanzmotor und starrer Lageranstellung.
doi: 10.26083/tuprints-00027784
Book, Secondary publication, Publisher's Version
Schmidt, Johannes Benedikt (2024)
Transitional Boiling Phenomena in Single Drop Impact and Spray Cooling.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027886
Ph.D. Thesis, Primary publication, Publisher's Version
Kuhr, Maximilian M. G. ; Pelz, Peter F. (2024)
Experimental identification of the force and moment characteristic of symmetrically and non-symmetrically profiled annular seals.
In: Bulletin of the Polish Academy of Sciences Technical Sciences, 2023, 71 (6)
doi: 10.26083/tuprints-00026557
Article, Secondary publication, Publisher's Version
Pelz, Peter F. ; Lemmer, Jan ; Schmitz, Christian B. (2024)
Misled by Betz and unsteady flow – review on turbine arrays falsely deemed ‘optimal’.
In: International Marine Energy Journal, 2022, 5 (3)
doi: 10.26083/tuprints-00026558
Article, Secondary publication, Publisher's Version
Petrat, Deborah (2024)
Einfluss von Künstlicher Intelligenz bei aufgabenorientiertem Führungsverhalten auf Mitarbeitende.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028035
Ph.D. Thesis, Primary publication, Publisher's Version
Erd, Nicolas (2024)
Permanentmagneterregte Synchronmaschinen mit Zahnspulenwicklung und massivem Rotorjoch für getriebelose Offshore-Windenergieanlagen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028080
Ph.D. Thesis, Primary publication, Publisher's Version
Schmidt, J. Benedikt ; Hofmann, Julian ; Tenzer, Fabian M. ; Breitenbach, Jan ; Tropea, Cameron ; Roisman, Ilia V. (2024)
Thermosuperrepellency of a hot substrate caused by vapour percolation.
In: Communications Physics, 2021, 4 (1)
doi: 10.26083/tuprints-00023621
Article, Secondary publication, Publisher's Version
Dietrich, Maximilian ; Ling, Kunxiong ; Schmid, Roland ; Song, Zhao ; Beidl, Christian (2024)
Design and evaluation of an engine-in-the-loop environment for developing plug-in hybrid electric vehicle operating strategies at conventional test benches.
In: Automotive and Engine Technology, 2021, 6 (3-4)
doi: 10.26083/tuprints-00023556
Article, Secondary publication, Publisher's Version
Götzinger, Robert ; Hill, Maximillian ; Schabel, Samuel ; Schneider, Jens (2024)
Glass-paper-laminates: examination of manufacturing methods, properties and discussion of potentials.
In: Glass Structures & Engineering, 2021, 6 (1)
doi: 10.26083/tuprints-00023554
Article, Secondary publication, Publisher's Version
Khadke, Prashant ; Tichter, Tim ; Boettcher, Tim ; Muench, Falk ; Ensinger, Wolfgang ; Roth, Christina (2024)
A simple and effective method for the accurate extraction of kinetic parameters using differential Tafel plots.
In: Scientific Reports, 2021, 11 (1)
doi: 10.26083/tuprints-00023589
Article, Secondary publication, Publisher's Version
Frick, Nicholas Uwe (2024)
Integration des Digitalen Zwillings in das Wertstrommanagement.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028081
Ph.D. Thesis, Primary publication, Publisher's Version
Eickhoff, Markus (2024)
Analysis and Optimization of Single-Pad and Multi-Pad Air Foil Thrust Bearings.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027789
Ph.D. Thesis, Primary publication, Publisher's Version
Kaltenbacher, Manfred ; Gschwentner, Andreas ; Kaltenbacher, Barbara ; Ulbrich, Stefan ; Reinbacher-Köstinger, Alice (2024)
Inverse Scheme to Locally Determine Nonlinear Magnetic Material Properties: Numerical Case Study.
In: Mathematics, 2024, 12 (10)
doi: 10.26083/tuprints-00027494
Article, Secondary publication, Publisher's Version
Askarizadeh, Hossein ; Pielsticker, Stefan ; Nicolai, Hendrik ; Kneer, Reinhold ; Hasse, Christian ; Maßmeyer, Anna (2024)
Investigation of the Coupling Schemes between the Discrete and the Continuous Phase in the Numerical Simulation of a 60 kWth Swirling Pulverised Solid Fuel Flame under Oxyfuel Conditions.
In: Fire, 2024, 7 (6)
doi: 10.26083/tuprints-00027496
Article, Secondary publication, Publisher's Version
Kilian, Nicklas ; Klausmann, Fabian ; Spieker, Daniel ; Schiffer, Heinz-Peter ; Gutiérrez Salas, Mauricio (2024)
Numerical Investigation of Forced Response in a Transonic Compressor Stage — Highlighting Challenges Using Experimental Validation.
In: International Journal of Turbomachinery, Propulsion and Power, 2024, 9 (2)
doi: 10.26083/tuprints-00027829
Article, Secondary publication, Publisher's Version
Bossler, Lukas Florian ; Rogalski, Timo ; Stanula, Patrick ; Lang, Enno ; Kohn, Oliver ; Metternich, Joachim ; Weigold, Matthias ; Krönung, Julia ; Buchwald, Arne (2024)
Pay-per-Stress – Belastungsorientierte Leasingmodelle im Maschinenbau.
In: Wirtschaftsinformatik & Management, 2021, 13 (6)
doi: 10.26083/tuprints-00023601
Article, Secondary publication, Publisher's Version
Knüppel, Finn ; Malchow, Sasha ; Sun, Ang ; Hussong, Jeanette ; Hartmann, Alexander ; Wurm, Frank-Hendrik ; Torner, Benjamin (2024)
Viscosity Modeling for Blood and Blood Analog Fluids in Narrow Gap and High Reynolds Numbers Flows.
In: Micromachines, 2024, 15 (6)
doi: 10.26083/tuprints-00027826
Article, Secondary publication, Publisher's Version
Erven, Maren (2024)
WAAM-Knoten im Stahlhochbau.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027899
Ph.D. Thesis, Primary publication, Publisher's Version
Knauthe, Volker ; Kraus, Maurice ; Buelow, Max von ; Wirth, Tristan ; Rak, Arne ; Merth, Laurenz ; Erbe, Alexander ; Kontermann, Christian ; Guthe, Stefan ; Kuijper, Arjan ; Fellner, Dieter W.
eds.: Bender, Jan ; Botsch, Mario ; Keim, Daniel A. (2024)
Alignment and Reassembly of Broken Specimens for Creep Ductility Measurements.
VMV 2022 – Symposium on Vision, Modeling, and Visualization. Konstanz (27.09.2022-30.09.2022)
doi: 10.26083/tuprints-00026596
Conference or Workshop Item, Secondary publication, Publisher's Version
Becker-Dombrowsky, Florian Michael ; Kirchner, Eckhard (2024)
Electrical impedance based condition monitoring of machine elements – a systematic review.
In: Frontiers in Mechanical Engineering, 2024, 10
doi: 10.26083/tuprints-00027843
Article, Secondary publication, Publisher's Version
Vatter, J. M. ; Jung, B. ; Oechsner, M. (2024)
Electrochemical hydrogen permeation measurement during cyclic stress testing of a ferritic chromium steel.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2024, 55 (6)
doi: 10.26083/tuprints-00027690
Article, Secondary publication, Publisher's Version
Fritschen, Anna ; Lindner, Nils ; Scholpp, Sebastian ; Richthof, Philipp ; Dietz, Jonas ; Linke, Philipp ; Guttenberg, Zeno ; Blaeser, Andreas (2024)
High‐Scale 3D‐Bioprinting Platform for the Automated Production of Vascularized Organs‐on‐a‐Chip.
In: Advanced Healthcare Materials, 2024, 13 (17)
doi: 10.26083/tuprints-00027693
Article, Secondary publication, Publisher's Version
Deckenbach, Daniel ; Schneider, Jörg J. (2024)
Toward a Metal Anode‐Free Zinc‐Air Battery for Next‐Generation Energy Storage.
In: Small : nano micro, 2024, 20 (22)
doi: 10.26083/tuprints-00027692
Article, Secondary publication, Publisher's Version
Koetz, Florian ; Schmitt, Florian ; Kirchner, Eckhard ; Zancul, Eduardo (2024)
Visualising the lubrication condition in hydrodynamic journal bearings using impedance measurement.
In: Frontiers in Mechanical Engineering, 2024, 10
doi: 10.26083/tuprints-00028051
Article, Secondary publication, Publisher's Version
Stasica, Maximilian ; Honekamp, Celine ; Streiling, Kai ; Penacchio, Olivier ; Dam, Loes van ; Seyfarth, André (2024)
Walking on Virtual Surface Patterns Leads to Changed Control Strategies.
In: Sensors, 2024, 24 (16)
doi: 10.26083/tuprints-00028071
Article, Secondary publication, Publisher's Version
Pelz, Peter F. ; Keil, Thomas ; Ludwig, Gerhard (2024)
On the Kinematics of Sheet and Cloud Cavitation and Related Erosion.
In: Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction, 2014
doi: 10.26083/tuprints-00026698
Book Section, Secondary publication, Postprint
Rieß, Sebastian Werner (2024)
Schwingungs- und Lärmreduktion an Kreissägeblättern mit strukturintegrierten vibroakustischen Metamaterialien.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027881
Ph.D. Thesis, Primary publication, Publisher's Version
Brötz, Nicolas (2024)
Verbesserung von Fahrsicherheit und -komfort durch einen neuen Hydrotilger.
doi: 10.26083/tuprints-00026701
Book, Secondary publication, Postprint
Jourdan, Nicolas (2024)
Addressing Concept Drift in Machine Learning-Based Monitoring of Manufacturing Processes.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028043
Ph.D. Thesis, Primary publication, Publisher's Version
Khalil, Ahmad (2024)
Vehicular Communication for Collective Perception : Adaptive and Communication-Efficient Vehicular Perception Mechanisms.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027891
Ph.D. Thesis, Primary publication, Publisher's Version
Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Adaption of a 300 kWth Pilot Plant for Testing the Indirectly Heated Carbonate Looping Process for CO2 Capture from Lime and Cement Industry.
13th European Conference on Industrial Furnaces and Boilers (INFUB-13). Algarve, Portugal (19.04.2022-22.04.2022)
doi: 10.26083/tuprints-00028045
Conference or Workshop Item, Primary publication, Publisher's Version
Koch, Yanik (2024)
Gearbox Condition Monitoring Based On Angle Measurement Using A Gear As Material Measure.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027892
Ph.D. Thesis, Primary publication, Publisher's Version
Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Performance of a limestone-based coupled fluidized bed reactor system aiming CO2 capture in a 300 kWth pilot plant.
Fluidization XVII. Edinburgh, Scotland (21.05.2023-25.05.2023)
doi: 10.26083/tuprints-00028046
Conference or Workshop Item, Primary publication, Publisher's Version
Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Pilot testing of the indirectly heated carbonate looping process for CO2 capture from lime industry.
12th Mediterranean Combustion Symposium (MCS-12). Luxor, Egypt (23.01.2023-26.01.2023)
doi: 10.26083/tuprints-00028048
Conference or Workshop Item, Primary publication, Publisher's Version
Hofmann, Carina ; Greco-Coppi, Martin ; Walter, Diethelm ; Ströhle, Jochen ; Epple, Bernd (2024)
Pilot testing of the indirectly heated carbonate looping process for lime plants.
9th High Temperature Solid Looping Cycles Network Meeting (IEAGHGT). Piacenza, Italy (14.03.2023-15.03.2023)
doi: 10.26083/tuprints-00028047
Conference or Workshop Item, Primary publication, Publisher's Version
Pfendler, Anna (2024)
On the dynamic frequency support of active distribution grids and their aggregation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027832
Ph.D. Thesis, Primary publication, Publisher's Version
Feldmann, Jakob (2024)
Additive Fertigung von Papierprägewerkzeugen und Methoden zur Prognose des Prägebildübertrags.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027595
Ph.D. Thesis, Primary publication, Publisher's Version
Friedrich, Jonas (2024)
Numerical Methods for the Simulation of the Acoustics of Multiphase Flows.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028036
Ph.D. Thesis, Primary publication, Publisher's Version
Yildiz, Coskun (2024)
Untersuchung der Freisetzung von Schwefel-, Chlor- und Stickstoffverbindungen bei der Oxyfuel-Verbrennung von Biomasse.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028018
Ph.D. Thesis, Primary publication, Publisher's Version
Kraus, Zacharias Johannes (2024)
Robust stabilization and anti-resonance in parametrically excited dynamical systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027801
Ph.D. Thesis, Primary publication, Publisher's Version
Moritz-Fritschen, Anna (2024)
Investigation of Biological and Technical Components for the Development of a 3D-Bioprinting Process for Vascularized Organs-on-a-Chip.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027749
Ph.D. Thesis, Primary publication, Publisher's Version
Okda, Sherif (2024)
Development of Actuator-Amplifier Systems for Active Vibration Control of Gearboxes.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027879
Ph.D. Thesis, Primary publication, Publisher's Version
Kubik, Christian (2024)
Zuverlässige maschinelle Lernmodelle zur Zustandsdiagnose von Fertigungsprozessen am Beispiel des Stanzens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027831
Ph.D. Thesis, Primary publication, Publisher's Version
Nguyen, Cat Tuong (2024)
Turbulent Round Jet Flows: Direct Numerical Simulations and a Symmetry Analysis.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027862
Ph.D. Thesis, Primary publication, Publisher's Version
Völzel, Constantin (2024)
Aerothermal Investigation of the Flow around an Airfoil with Endwall Cooling Air Injection.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026612
Master Thesis, Primary publication, Publisher's Version
Molitor, Dirk Alexander (2024)
KI-gestützte Regelung von unsicherheitsbehafteten Umformprozessen auf redundanten Mehrpunkt-Servopressen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027854
Ph.D. Thesis, Primary publication, Publisher's Version
Bretones Cassoli Nevejan, Beatriz (2024)
Graph representation learning for predictive quality in multi-stage discrete manufacturing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027808
Ph.D. Thesis, Primary publication, Publisher's Version
Kugler, Stefan (2024)
Konzept zur Produktionsdatenselektion für Digitale Zwillinge.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027453
Ph.D. Thesis, Primary publication, Publisher's Version
Üngör, Özer (2024)
Untersuchung eines Stoffgesetzes der impliziten Gradientenelastizität.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027788
Ph.D. Thesis, Primary publication, Publisher's Version
Barkhausen, Robin (2024)
Advancing the understanding and impact assessment of circular economy product legislation in the European Union.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027751
Ph.D. Thesis, Primary publication, Publisher's Version
Kraft, Jan (2024)
Entwicklung und Analyse eines Berechnungskonzepts zur Lebensdauerabschätzung gekerbter Bauteile unter nichtproportionaler Beanspruchung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027804
Ph.D. Thesis, Primary publication, Publisher's Version
Samkhaniani, Nima ; Marschall, Holger ; Stroh, Alexander ; Frohnapfel, Bettina ; Wörner, Martin (2024)
Numerical simulation of drop impingement and bouncing on a heated hydrophobic surface.
In: Journal of Physics: Conference Series, 2021, 2116
doi: 10.26083/tuprints-00021351
Article, Secondary publication, Publisher's Version
Bulakh, Iryna (2024)
Sustainable Development in the Context of the Architecture of Environmental Friendly Medical Centers in Rural Areas (Case for Ukraine).
In: IOP Conference Series: Earth and Environmental Science, 2022, 1111
doi: 10.26083/tuprints-00023097
Article, Secondary publication, Publisher's Version
Zhang, Shuyue ; Wu, Jihao ; Jungblut, Jens ; Rinderknecht, Stephan (2024)
Vibration Control for the Flexible Rotor with Piezoelectric Bearings Based on the Mixed Sensitivity Robust Controller.
In: Journal of Physics: Conference Series, 2021, 1905
doi: 10.26083/tuprints-00021367
Article, Secondary publication, Publisher's Version
Longard, Lukas Philipp (2024)
Datenbasierte Entscheidungsunterstützung für das wertstromübergreifende Performance Management.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027662
Ph.D. Thesis, Primary publication, Publisher's Version
Dokoza, Toni (2024)
Influencing coherent structures in a plane Couette flow.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027582
Ph.D. Thesis, Primary publication, Publisher's Version
Bardy, Sebastian (2024)
Shopfloor Management für die ressourceneffiziente Produktion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027583
Ph.D. Thesis, Primary publication, Publisher's Version
Haile, Dawit (2024)
Kohlenstoffabscheidung und -nutzung in der Herstellung nachhaltiger Baumaterialien.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027366
Master Thesis, Primary publication, Publisher's Version
Schäfer, Kilian (2024)
Laser powder bed fusion of hard magnetic composites.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027587
Ph.D. Thesis, Primary publication, Publisher's Version
Knödl, Felix ; Dörsam, Edgar ; Schneider, Tizian ; Schütze, Andreas
eds.: Technische Universität Darmstadt, Universität des Saarlandes (2024)
Kontrolle des Farb-Wasser-Gleichgewichts durch KI.
doi: 10.26083/tuprints-00027376
Report, Primary publication, Publisher's Version
Theile, Andre Manuel (2024)
Model Validation for Air Foil Thrust Bearings.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027584
Ph.D. Thesis, Primary publication, Publisher's Version
eds.: Rinderknecht, Stephan ; Schüßler, Benedikt ; Schwarz, Sarah (2024)
Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics.
SIRM 2023 - 15th European Conference on Rotordynamics. Darmstadt, Germany (22.02.2023-24.02.2023)
doi: 10.26083/tuprints-00027602
Conference or Workshop Item, Primary publication, Publisher's Version
Urain, Julen (2024)
Deep Generative Models for Motion Planning and Control.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027565
Ph.D. Thesis, Primary publication, Publisher's Version
Sos, Marcel ; Tiphene, Gabrielle ; Loubet, Jean-Luc ; Bruns, Sebastian ; Bruder, Enrico ; Durst, Karsten (2024)
Mechanical softening of CuX alloys at elevated temperatures studied via high temperature scanning indentation.
In: Materials & Design, 2024, 240
doi: 10.26083/tuprints-00027666
Article, Secondary publication, Publisher's Version
Held, Florian (2024)
A 3D Computational Study of Soot Formation in Gasoline Direct-Injection Engines during Transient Operation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026970
Ph.D. Thesis, Primary publication, Publisher's Version
Holzmann, Hendrik (2024)
Ferroelektret Energy Harvester für den Einsatz in Flugzeugstrukturen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027592
Ph.D. Thesis, Primary publication, Publisher's Version
Weyand, Astrid (2024)
Methodik zur Erweiterung von Lernfabriken um das Thema Ressourceneffizienz.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027589
Ph.D. Thesis, Primary publication, Publisher's Version
Sontheimer, Henrik ; Kind, Johannes ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2024)
Numerical simulation of drop array impingement onto a superheated wall.
ICLASS 2024, 16th Triennial International Conference on Liquid Atomization and Spray Systems. Shanghai, China (23.06.2024-27.06.2024)
doi: 10.26083/tuprints-00027601
Conference or Workshop Item, Secondary publication, Publisher's Version
Zeise, Pascal (2024)
Dynamik, Stabilitäts- und Bifurkationsanalyse von Rotorsystemen mit Luftlagern: Numerische Untersuchung und Optimierung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027590
Ph.D. Thesis, Primary publication, Publisher's Version
Nobis, Kim Merle (2024)
Flächenbereitstellung für die Renaturierung und naturnahe Entwicklung von Fließgewässern.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027521
Ph.D. Thesis, Primary publication, Publisher's Version
Kohn, Oliver Maximilian (2024)
Ermittlung der Komponentenbelastung aus Antriebsdaten als Kenngröße belastungsorientierter Bezahlmodelle bei Werkzeugmaschinen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027503
Ph.D. Thesis, Primary publication, Publisher's Version
Johe, Pascal (2024)
Flame-Wall Interactions at Elevated Pressure Studied with Advanced Laser Diagnostics.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027359
Ph.D. Thesis, Primary publication, Publisher's Version
Herfurth, Dominik (2024)
Mechanische Verbundeigenschaften zusammengesetzter Querschnitte aus trockenbauüblichen, dünnwandigen Stahlprofilen und mineralisch basierten Plattenwerkstoffen unter statischen und seismischen Beanspruchungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027522
Ph.D. Thesis, Primary publication, Publisher's Version
Wenzel, Jan (2024)
Zeitfeste Auslegung ungeschmierter Wälzkontakte am Beispiel von angetriebenen Kunststoff-Festlager-Laufrollen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027480
Ph.D. Thesis, Primary publication, Publisher's Version
Parmar, Devang ; Dehm, Simone ; Peyyety, Naga Anirudh ; Kumar, Sandeep ; Krupke, Ralph (2024)
Enhanced Broadband Photodetection with Geometry and Interface Engineered Nanocrystalline Graphite.
In: Advanced Sensor Research, 2024, 3 (2)
doi: 10.26083/tuprints-00027103
Article, Secondary publication, Publisher's Version
Tepper, Cornelia Maria (2024)
Genauigkeitssteigerung der spanenden Nachbearbeitung additiv gefertigter Bauteile mit Industrierobotern mittels Posenoptimierung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027508
Ph.D. Thesis, Primary publication, Publisher's Version
Enkelmann, Franz Alexander Richard (2024)
A Hybrid Model for the Estimation of Time-Variant Aircraft Parameters.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027405
Ph.D. Thesis, Primary publication, Publisher's Version
Schmiedt, Marius (2024)
Machine Learning Based Calibration of Dual Clutch Transmissions for Optimizing the Launch Behavior of Passenger Vehicles.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027365
Ph.D. Thesis, Primary publication, Publisher's Version
Tao, Yikai (2024)
Energy and Service Life Management Strategy for a Two-Drive Multi-Speed Electric Vehicle.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027491
Ph.D. Thesis, Primary publication, Publisher's Version
Hoche, Holger ; Ulrich, Thomas ; Kaestner, Peter ; Oechsner, Matthias (2024)
Empowering PVD for corrosion protection : TiMgGdN coatings with game‐changing corrosion performance: A genuine competitor to electroplated chromium.
In: Vakuum in Forschung und Praxis, 2024, 36 (2)
doi: 10.26083/tuprints-00027122
Article, Secondary publication, Publisher's Version
Seifert, Jonas (2024)
Entwicklung einer Methode zur Strukturüberwachung automobiler Hochvoltspeicher.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027473
Ph.D. Thesis, Primary publication, Publisher's Version
Gutiérrez Jorquera, Juan Francisco (2024)
A Fully Coupled Discontinuous Galerkin Method for Low-Mach Diffusion Flames.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026771
Ph.D. Thesis, Primary publication, Publisher's Version
Panic, Darko (2024)
Thermodynamisch konsistente FE-Simulation des Ermüdungsrissfortschritts unter Berücksichtigung zyklischer Plastizitätseffekte und der Mechanik materieller Kräfte.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027382
Ph.D. Thesis, Primary publication, Publisher's Version
Bienefeld, Christoph (2024)
A Contribution on the Transferability of Data-Driven Models for Bearing Fault Diagnosis.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027475
Ph.D. Thesis, Primary publication, Publisher's Version
Megahed, Sandra Mustafa (2024)
Effect of Component Geometry and Build Orientation on the Microstructure and Mechanical Properties of Nickel Superalloys Manufactured with Laser Powder Bed Fusion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027325
Ph.D. Thesis, Primary publication, Publisher's Version
Prochazka, Karl Frederik (2024)
Integrierte und robuste fehlertolerante Regelung eines überaktuierten unbemannten Fluggerätes.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027383
Ph.D. Thesis, Primary publication, Publisher's Version
Bopp, Maximilian (2024)
Scale-resolving modeling of heat and mass transfer in IC engine-relevant impinging flow configurations: Sensitized RANS-RSM-based turbulence anisotropy characterization.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027399
Ph.D. Thesis, Primary publication, Publisher's Version
Helbrecht, Christiane (2024)
Anisotrope Porenstruktur in Papier – Charakterisierung, Herstellung, Anwendungspotential.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027311
Ph.D. Thesis, Primary publication, Publisher's Version
Blug, Andreas ; Conrad, Fabian ; Bertz, Alexander ; Kontermann, Christian ; Carl, Daniel ; Oechsner, Matthias (2024)
Application of high‐performance DIC for a comprehensive evaluation of biaxial fatigue crack growth experiments.
In: Strain : An International Journal for Experimental Mechanics, 2023, 59 (6)
doi: 10.26083/tuprints-00027173
Article, Secondary publication, Publisher's Version
Machaček, Jan ; Brosz, Frederik ; Staubach, Patrick ; Wichtmann, Torsten ; Zachert, Hauke (2024)
Back-calculations of centrifuge tests on pile groups subjected to high-cyclic loading.
DFI-EFFC International Conference on Deep Foundations and Ground Improvement: Smart Construction for the Future. Berlin, Germany (18.05.2022-20.05.2022)
doi: 10.26083/tuprints-00027463
Conference or Workshop Item, Primary publication, Publisher's Version
Arnold, Patrick ; Bathaeian, Iman ; Böhle, Björn ; Chmyznikov, Edvard ; Christen, Martin ; Detert, Oliver ; Gasparik, Matus ; Gottwald, Jonas ; Grabe, Jürgen ; Grübl, Fritz ; Haddad, Fadi ; Heisig, Anne ; Henke, Sascha ; Henssler, Torsten ; Hölzel, Michael ; Huber, Heiko ; Ibuk, Hursit ; Jehle, Jens ; Jürgens, Hauke ; Kaffenberger, Franz ; Katzenbach, Rolf ; Kirchner, Andreas ; Kirchner, Sven ; Kötzel, Friedemann ; Kummerer, Clemens ; Kuttig, Heiko ; Labenski, Johannes ; Meyer, David ; Neumann, Malte ; Nguyen, Luan ; Niesel, Isabelle ; Pandrea, Paul ; Pöchacker, Christian ; Rothmund, Michael ; Schädlich, Bert ; Schäfers, Peter ; Schneider-Muntau, Barbara ; Schnell, Sebastian ; Schweckendiek, Timo ; Schweinberger, Manuel ; Seip, Matthias ; Trunk, Ulrich ; Vernikovsky, Maryna ; Vogel, Paul ; Wagner, Matthias ; Weber, Florian ; Wehr, Christoph ; Werth, Henning von der ; Wilhelm, Sigrid
eds.: Zachert, Hauke ; Technische Universität Darmstadt. Institut für Geotechnik (2024)
Beiträge zum 28. Darmstädter Geotechnik-Kolloquium am 09. März 2022.
28. Darmstädter Geotechnik-Kolloquium mit Fachausstellung. Darmstadt (09.03.2022-09.03.2022)
doi: 10.26083/tuprints-00027458
Conference or Workshop Item, Primary publication, Publisher's Version
Zhou, Li ; Yang, Jingtao ; Strampe, Tilman ; Klingauf, Uwe (2024)
Incremental nonlinear dynamic inversion based path‐following control for a hybrid quad‐plane unmanned aerial vehicle.
In: International Journal of Robust and Nonlinear Control, 2023, 33 (17)
doi: 10.26083/tuprints-00027178
Article, Secondary publication, Publisher's Version
Beroya-Eitner, Mary Antonette ; Zachert, Hauke ; Eichhoff, Gerald ; Schneider, Marc (2024)
A Review of Medium-to Large-Scale Laboratory Testing Facilities for Soil-Pile Interaction.
DFI-EFFC International Conference on Deep Foundations and Ground Improvement: Smart Construction for the Future. Berlin, Germany (18.05.2022-20.05.2022)
doi: 10.26083/tuprints-00027464
Conference or Workshop Item, Primary publication, Publisher's Version
Marx, Falko (2024)
Experimental Investigation in Autothermal Chemical Looping Gasification.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027400
Ph.D. Thesis, Primary publication, Publisher's Version
Wester, T.T.B. ; Kampers, G. ; Gülker, G. ; Peinke, J. ; Cordes, U. ; Tropea, C. ; Hölling, M. (2024)
High speed PIV measurements of an adaptive camber airfoil under highly gusty inflow conditions.
In: Journal of Physics: Conference Series, 2018, 1037 (7)
doi: 10.26083/tuprints-00021062
Article, Secondary publication, Publisher's Version
Hol, J. ; Wiebenga, J.H. ; Hörning, M. ; Dietrich, F. ; Dane, C. (2024)
Advanced friction simulation of standardized friction tests: a numerical and experimental demonstrator.
In: Journal of Physics: Conference Series, 2016, 734 (3)
doi: 10.26083/tuprints-00020974
Article, Secondary publication, Publisher's Version
Schilling, Jakob Christian ; Mittelstedt, Christian (2024)
Approximate postbuckling analysis of shear deformable laminates.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (4)
doi: 10.26083/tuprints-00027195
Article, Secondary publication, Publisher's Version
Keszler, Monica ; Grosswendt, Felix ; Assmann, Anna-Caroline ; Krengel, Martin ; Maccari, Fernando ; Gutfleisch, Oliver ; Sebold, Doris ; Guillon, Olivier ; Weber, Sebastian ; Bram, Martin (2024)
Direct Recycling of Hot‐Deformed Nd–Fe–B Magnet Scrap by Field‐Assisted Sintering Technology.
In: Advanced Energy and Sustainability Research, 2024, 5 (1)
doi: 10.26083/tuprints-00027221
Article, Secondary publication, Publisher's Version
Humbert, Angelika ; Gross, Dietmar ; Sondershaus, Rabea ; Müller, Ralf ; Steeb, Holger ; Braun, Matthias ; Brauchle, Jörg ; Stebner, Karsten ; Rückamp, Martin (2024)
Fractures in glaciers — Crack tips and their stress fields by observation and modeling.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (3)
doi: 10.26083/tuprints-00027197
Article, Secondary publication, Publisher's Version
Reichel, Maximilian ; Groche, Peter ; Gutfleisch, Oliver ; Schröder, Jörg (2024)
Impact of soft magnetic α‐Fe in hard Nd₂Fe₁₄B magnetic materials: A micromagnetic study.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027212
Article, Secondary publication, Publisher's Version
Schreiber, Philip ; Mittelstedt, Christian (2024)
Lévy‐type solutions for buckling of shear deformable unsymmetrically laminated plates with rotational restraints.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (3)
doi: 10.26083/tuprints-00027209
Article, Secondary publication, Publisher's Version
Fang, Xufei (2024)
Mechanical tailoring of dislocations in ceramics at room temperature: A perspective.
In: Journal of the American Ceramic Society, 2024, 107 (3)
doi: 10.26083/tuprints-00027189
Article, Secondary publication, Publisher's Version
Kunz, Jana ; Rutz, Xenia ; Stephan, Simon ; Hasse, Hans ; Müller, Ralf (2024)
Simulation of vibrating droplets using a phase field approach.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027210
Article, Secondary publication, Publisher's Version
Zhao, Tian ; Schneider‐Jung, Fabio ; Linn, Joachim ; Müller, Ralf (2024)
Towards realistic nonlinear elastic bending behavior for cable simulation.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (4)
doi: 10.26083/tuprints-00027194
Article, Secondary publication, Publisher's Version
Sajadifar, Seyed Vahid ; Baumgartner, Jörg ; Krochmal, Marcel ; Maciolek, Andreas ; Klein, Marcus ; Rößer, Moritz ; Graß, Markus ; Fröck, Hannes ; Fehlbier, Martin ; Kessler, Olaf ; Böhm, Stefan ; Oechsner, Matthias ; Melz, Tobias ; Niendorf, Thomas (2024)
On the Monotonic and Cyclic Behavior of an Al‐Mg‐Zn‐Cu‐Si Compositionally Complex Alloy.
In: Advanced Engineering Materials, 2023, 25 (21)
doi: 10.26083/tuprints-00027253
Article, Secondary publication, Publisher's Version
Zambotti, Andrea ; Qu, Fangmu ; Costa, Giacomo ; Graczyk-Zajac, Magdalena ; Sorarù, Gian Domenico (2024)
Polymer‐Derived Ceramic Aerogels to Immobilize Sulfur for Li‐S Batteries.
In: Energy Technology : Generation, Conversion, Storage, Distribution, 2023, 11 (12)
doi: 10.26083/tuprints-00027234
Article, Secondary publication, Publisher's Version
Nowak, Emanuel Galileo (2024)
Optimization of Glass Plate Structures with Additive Manufacturing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026956
Bachelor Thesis, Primary publication, Publisher's Version
Aghel, Babak ; Alobaid, Falah ; Graf, Christoph ; Epple, Bernd (2024)
Efficiency Analysis of the Discrete Element Method Model in Gas‐Fluidized Beds.
In: Chemical Engineering & Technology, 2024, 47 (1)
doi: 10.26083/tuprints-00027243
Article, Secondary publication, Publisher's Version
Fach, Christian ; Rödel, Nico ; Schorr, Jürgen ; Krüger, Christian ; Dreizler, Andreas ; Böhm, Benjamin (2024)
Investigation of in-cylinder soot formation in a DISI engine during transient operation by simultaneous endoscopic PIV and flame imaging.
In: International Journal of Engine Research, 2022, 24 (3)
doi: 10.26083/tuprints-00023255
Article, Secondary publication, Publisher's Version
Hanuschkin, Alexander ; Schober, Steffen ; Bode, Johannes ; Schorr, Jürgen ; Böhm, Benjamin ; Krüger, Christian ; Peters, Steven (2024)
Machine learning–based analysis of in-cylinder flow fields to predict combustion engine performance.
In: International Journal of Engine Research, 2021, 22 (1)
doi: 10.26083/tuprints-00016051
Article, Secondary publication, Publisher's Version
Pati, Andrea ; Paredi, Davide ; Welch, Cooper ; Schmidt, Marius ; Geschwindner, Christopher ; Böhm, Benjamin ; Lucchini, Tommaso ; D’Errico, Gianluca ; Hasse, Christian (2024)
Numerical and experimental investigations of the early injection process of Spray G in a constant volume chamber and an optically accessible DISI engine.
In: International Journal of Engine Research, 2022, 23 (12)
doi: 10.26083/tuprints-00022554
Article, Secondary publication, Publisher's Version
Kircher, Magnus ; Meindl, Emmeram ; Hasse, Christian (2024)
Numerical and experimental study on knocking combustion in turbocharged direct-injection engines for a wide range of operating conditions.
In: International Journal of Engine Research, 2023, 24 (2)
doi: 10.26083/tuprints-00023174
Article, Secondary publication, Publisher's Version
Maliha, Malki ; Stumpf, Bastian ; Beyer, Felix ; Kühnert, Marius ; Kubach, Heiko ; Roisman, Ilia ; Hussong, Jeanette ; Koch, Thomas (2024)
Optical investigation on the interaction between a fuel-spray and an oil wetted wall with the focus on secondary droplets.
In: International Journal of Engine Research, 2022, 24 (4)
doi: 10.26083/tuprints-00023666
Article, Secondary publication, Publisher's Version
Kumar, Anuruddh ; Kumar, Sidhant ; Patel, Satyanarayan ; Sharma, Moolchand ; Azad, Puneet ; Vaish, Rahul ; Kumar, Rajeev ; Srikanth, KS (2024)
Pyroelectric energy conversion using Ba₀.₈₅Sr₀.₁₅Zr₀.₁Ti₀.₉O₃ ceramics and its cement-based composites.
In: Journal of Intelligent Material Systems and Structures, 2019, 30 (6)
doi: 10.26083/tuprints-00016988
Article, Secondary publication, Publisher's Version
Welch, Cooper ; Schmidt, Marius ; Geschwindner, Christopher ; Wu, Shengqi ; Wooldridge, Margaret S. ; Böhm, Benjamin (2024)
The influence of in-cylinder flows and bulk gas density on early Spray G injection in an optical research engine.
In: International Journal of Engine Research, 2023, 24 (1)
doi: 10.26083/tuprints-00023015
Article, Secondary publication, Publisher's Version
Kirchner, Eckhard ; Bartz, Marcel ; Becker-Dombrowsky, Florian (2024)
Behavior of Lubricated Bearings in Electric Circuits.
In: Lubricants, 2024, 12 (3)
doi: 10.26083/tuprints-00027127
Article, Secondary publication, Publisher's Version
Silva, Alessandro Brugnera ; Murcia, Marc ; Mohseni, Omid ; Takahashi, Ryu ; Forner-Cordero, Arturo ; Seyfarth, Andre ; Hosoda, Koh ; Sharbafi, Maziar Ahmad (2024)
Design of Low-Cost Modular Bio-Inspired Electric–Pneumatic Actuator (EPA)-Driven Legged Robots.
In: Biomimetics, 2024, 9 (3)
doi: 10.26083/tuprints-00027138
Article, Secondary publication, Publisher's Version
Ding, Ziming (2024)
In Situ Transmission Electron Microscopy Investigation of All Solid-state Sodium Batteries.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027009
Ph.D. Thesis, Primary publication, Publisher's Version
Frick, Nicholas ; Terwolbeck, Jan ; Seibel, Benjamin ; Metternich, Joachim (2024)
Design Model for the Digital Shadow of a Value Stream.
In: Systems, 2024, 12 (1)
doi: 10.26083/tuprints-00027165
Article, Secondary publication, Publisher's Version
Haeckel, Tobias ; Paul, Dominik ; Leichtfuß, Sebastian ; Schiffer, Heinz-Peter ; Eißler, Werner (2024)
Determination of a Numerical Surge Limit by Means of an Enhanced Greitzer Compressor Model.
In: International Journal of Turbomachinery, Propulsion and Power, 2023, 8 (4)
doi: 10.26083/tuprints-00027183
Article, Secondary publication, Publisher's Version
Spielmann, Jonas ; Braig, Daniel ; Streck, Antonia ; Gustmann, Tobias ; Kuhn, Carola ; Reinauer, Felix ; Kurnosov, Alexandr ; Leubner, Oliver ; Potapkin, Vasily ; Hasse, Christian ; Deutschmann, Olaf ; Etzold, Bastian J. M. ; Scholtissek, Arne ; Kramm, Ulrike I. (2024)
Exploring the oxidation behavior of undiluted and diluted iron particles for energy storage: Mössbauer spectroscopic analysis and kinetic modeling.
In: Physical Chemistry Chemical Physics, 2024, 26 (17)
doi: 10.26083/tuprints-00027310
Article, Secondary publication, Publisher's Version
Fett, Michel ; Wilking, Fabian ; Goetz, Stefan ; Kirchner, Eckhard ; Wartzack, Sandro (2024)
A Literature Review on the Development and Creation of Digital Twins, Cyber-Physical Systems, and Product-Service Systems.
In: Sensors, 2023, 23 (24)
doi: 10.26083/tuprints-00027168
Article, Secondary publication, Publisher's Version
Georges, Hussam ; García Solera, Diego ; Aguilar Borasteros, Carlos ; Metar, Mohmad ; Song, Gyeongseob ; Mandava, Rahul ; Becker, Wilfried ; Mittelstedt, Christian (2024)
Mechanical Performance Comparison of Sandwich Panels with Graded Lattice and Honeycomb Cores.
In: Biomimetics, 2024, 9 (2)
doi: 10.26083/tuprints-00027163
Article, Secondary publication, Publisher's Version
Fett, Michel ; Kraft, Marcel ; Wilking, Fabian ; Goetz, Stefan ; Wartzack, Sandro ; Kirchner, Eckhard (2024)
Medium-Level Architectures for Digital Twins: Bridging Conceptual Reference Architectures to Practical Implementation in Cloud, Edge and Cloud–Edge Deployments.
In: Electronics, 2024, 13 (7)
doi: 10.26083/tuprints-00027333
Article, Secondary publication, Publisher's Version
Böttler, Hannes (2024)
Modeling of ignition and flame propagation in lean and rich hydrogen-air mixtures.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027271
Ph.D. Thesis, Primary publication, Publisher's Version
Ruppert, Timm (2024)
Silent Testing der Fahrzeugsteuerung zur Identifikation von Herausforderungen und Möglichkeiten des Automatisierten Fahrens von Straßenbahnen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026362
Ph.D. Thesis, Primary publication, Publisher's Version
Heyden, Aaron von der (2024)
Untersuchungen zur Eignung von Zellstoff als Kernmaterial für Sandwichelemente.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027312
Ph.D. Thesis, Primary publication, Publisher's Version
Hausmann, Maximilian ; Schirra, Tobias ; Kirchner, Eckhard (2024)
Analysis of the Electrical Impedance of Graphite and Silver Graphite Carbon Brushes for Use in the Impedance Measurement of Sensory Utilizable Machine Elements.
In: Machines, 2023, 11 (11)
doi: 10.26083/tuprints-00027207
Article, Secondary publication, Publisher's Version
Klamann, Björn (2024)
Ansätze für eine modulare Absicherung hochautomatisierter Fahrzeuge.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027315
Ph.D. Thesis, Primary publication, Publisher's Version
Puchtler, Steffen ; Maier, Robert ; Kuhn, Martin ; Burkhardt, Yves (2024)
The Influence of Load and Speed on the Initial Breakdown of Rolling Bearings Exposed to Electrical Currents.
In: Lubricants, 2023, 12 (1)
doi: 10.26083/tuprints-00027208
Article, Secondary publication, Publisher's Version
Fischer, A. ; Lutz, T. ; Krämer, E. ; Cordes, U. ; Hufnagel, K. ; Tropea, C. ; Kampers, G. ; Hölling, M. ; Peinke, J. (2024)
Numerical and experimental investigation of an airfoil with load control in the wake of an active grid.
In: Journal of Physics: Conference Series, 2016, 753 (2)
Article, Secondary publication, Publisher's Version
Kramat, Janice ; Kraus, Leon ; Gunawan, Vincent J. ; Smyej, Elias ; Froehlich, Philipp ; Weber, Tim E. ; Spiehl, Dieter ; Koeppl, Heinz ; Blaeser, Andreas ; Suess, Beatrix (2024)
Sensing Levofloxacin with an RNA Aptamer as a Bioreceptor.
In: Biosensors, 2024, 14 (1)
doi: 10.26083/tuprints-00027255
Article, Secondary publication, Publisher's Version
Wacławczyk, M. ; Oberlack, M. (2024)
Symmetry analysis and invariant solutions of the multipoint infinite systems describing turbulence.
In: Journal of Physics: Conference Series, 2016, 760 (1)
doi: 10.26083/tuprints-00020877
Article, Secondary publication, Publisher's Version
Hasan, Lamyaa Khaleel ; Jiaad, Suaad Makki ; Salman, Khansaa Dawood ; Al-Maliki, Wisam Abed Kattea ; Alobaid, Falah ; Epple, Bernd (2024)
Wear Characteristics of (Al/B₄C and Al/TiC) Nanocomposites Synthesized via Powder Metallurgy Method.
In: Applied Sciences, 2023, 13 (23)
doi: 10.26083/tuprints-00027218
Article, Secondary publication, Publisher's Version
Scherer, Florian Felix (2024)
Entwicklung eines Modells zur kurvenabhängigen Trajektorienprädiktion von Motorradfahrern.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027031
Ph.D. Thesis, Primary publication, Publisher's Version
Keller, Thimo ; Behling, Magnus ; Stockinger, Christopher ; Metternich, Joachim ; Schützer, Klaus (2024)
Analysis of the influence of process complexity and employee competence on the effect of digital assistance in industrial assembly.
In: Production Engineering : Research and Development, 2021, 15 (1)
doi: 10.26083/tuprints-00023950
Article, Secondary publication, Publisher's Version
Ghillani, Noemi ; Heinz, Michael ; Gambaryan-Roisman, Tatiana (2024)
Capillary rise and evaporation of a liquid in a corner between a plane and a cylinder: A model of imbibition into a nanofiber mat coating.
In: The European Physical Journal Special Topics, 2020, 229 (10)
doi: 10.26083/tuprints-00023989
Article, Secondary publication, Publisher's Version
Prochazka, F. ; Krüger, S. ; Stomberg, G. ; Bauer, M. (2024)
Development of a hardware-in-the-loop demonstrator for the validation of fault-tolerant control methods for a hybrid UAV.
In: CEAS Aeronautical Journal, 2021, 12 (3)
doi: 10.26083/tuprints-00023507
Article, Secondary publication, Publisher's Version
Schork, Stefan ; Güttinger, Kai ; Kirchner, Eckhard (2024)
Eigenschaftsanalyse zur Entwicklung additiv gefertigter Prototypen – Das House of Properties.
In: Forschung im Ingenieurwesen = Engineering Research, 2020, 84 (4)
doi: 10.26083/tuprints-00023917
Article, Secondary publication, Publisher's Version
Kempf, Andreas ; Klein, Marcus ; Oechsner, Matthias (2024)
Ermittlung der Grenzflächenpressung von Bauteilwerkstoffen in Schraubenverbindungen an Ringproben bei erhöhter Temperatur bis 300 °C.
In: Forschung im Ingenieurwesen = Engineering Research, 2020, 84 (4)
doi: 10.26083/tuprints-00023916
Article, Secondary publication, Publisher's Version
Baumann, S. ; Neidhardt, T. ; Klingauf, U. (2024)
Evaluation of the aircraft fuel economy using advanced statistics and machine learning.
In: CEAS Aeronautical Journal, 2021, 12 (3)
doi: 10.26083/tuprints-00023508
Article, Secondary publication, Publisher's Version
Baier, Tobias ; Hardt, Steffen (2024)
Gas separation in a Knudsen pump inspired by a Crookes radiometer.
In: Microfluidics and Nanofluidics, 2020, 24 (6)
doi: 10.26083/tuprints-00023927
Article, Secondary publication, Publisher's Version
Wassenberg, J. ; Stephan, P. ; Gambaryan-Roisman, T. (2024)
Heat transfer during pulsating liquid jet impingement onto a vertical wall.
In: Heat and Mass Transfer = Wärme- und Stoffübertragung, 2021, 57 (4)
doi: 10.26083/tuprints-00023904
Article, Secondary publication, Publisher's Version
Hähn, Felix ; Weigold, Matthias (2024)
Hybrid compliance compensation for path accuracy enhancement in robot machining.
In: Production Engineering : Research and Development, 2020, 14 (4)
doi: 10.26083/tuprints-00023949
Article, Secondary publication, Publisher's Version
Gally, Tristan ; Groche, Peter ; Hoppe, Florian ; Kuttich, Anja ; Matei, Alexander ; Pfetsch, Marc E. ; Rakowitsch, Martin ; Ulbrich, Stefan (2024)
Identification of model uncertainty via optimal design of experiments applied to a mechanical press.
In: Optimization and Engineering : International Multidisciplinary Journal to Promote Optimization Theory & Applications in Engineering Sciences, 2022, 23 (1)
doi: 10.26083/tuprints-00023488
Article, Secondary publication, Publisher's Version
Al-Baradoni, Nassr ; Krech, Martin ; Groche, Peter (2024)
In-process calibration of smart structures produced by incremental forming.
In: Production Engineering : Research and Development, 2021, 15 (1)
doi: 10.26083/tuprints-00023951
Article, Secondary publication, Publisher's Version
Kissing, Johannes ; Kriegseis, Jochen ; Li, Zhenyao ; Feng, Lihao ; Hussong, Jeanette ; Tropea, Cameron (2024)
Insights into leading edge vortex formation and detachment on a pitching and plunging flat plate.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (9)
doi: 10.26083/tuprints-00023907
Article, Secondary publication, Publisher's Version
Holzmann, H. ; Weber, M. ; Park, Y. J. ; Perfetto, S. ; Atzrodt, H. ; Dafnis, A. (2024)
Investigation of biogenic materials and ferroelectrets for energy harvesting on vibrating aircraft structures.
In: CEAS Aeronautical Journal, 2021, 12 (2)
doi: 10.26083/tuprints-00023509
Article, Secondary publication, Publisher's Version
Bretz, Andreas ; Abele, Eberhard ; Weigold, Matthias (2024)
Measuring the bore straightness during reaming with sensoric tools.
In: Production Engineering : Research and Development, 2020, 14 (4)
doi: 10.26083/tuprints-00023952
Article, Secondary publication, Publisher's Version
Fügenschuh, Armin ; Lorenz, Ulf ; Pelz, Peter F. (2024)
OPTE special issue on technical operations research (TOR).
In: Optimization and Engineering, 2021, 22 (2)
doi: 10.26083/tuprints-00023487
Article, Secondary publication, Publisher's Version
Blahout, Sebastian ; Reinecke, Simon R. ; Tabaei Kazerooni, Hamid ; Kruggel-Emden, Harald ; Hussong, Jeanette (2024)
On the 3D distribution and size fractionation of microparticles in a serpentine microchannel.
In: Microfluidics and Nanofluidics, 2020, 24 (3)
doi: 10.26083/tuprints-00023926
Article, Secondary publication, Publisher's Version
Bechtel, Simon ; Bayer, Brian ; Vidaković-Koch, Tanja ; Wiser, Artur ; Vogel, Herbert ; Sundmacher, Kai (2024)
Precise determination of LJ parameters and Eucken correction factors for a more accurate modeling of transport properties in gases.
In: Heat and Mass Transfer = Wärme- und Stoffübertragung, 2020, 56 (8)
doi: 10.26083/tuprints-00023905
Article, Secondary publication, Publisher's Version
Schöpp, Ferdinand (2024)
Quantifizierung der Treibhausgasemissionen des oberleitungsgebundenen Straßengüterverkehrs.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027013
Ph.D. Thesis, Primary publication, Publisher's Version
Greifenstein, M. ; Heinze, J. ; Willert, C. ; Voigt, L. ; Zedda, M. ; Richter, C. ; Dreizler, A. (2024)
Time-resolved temperature profile measurements in the exhaust of a single sector gas turbine combustor at realistic operating conditions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (8)
doi: 10.26083/tuprints-00023903
Article, Secondary publication, Publisher's Version
Schork, B. ; Zerbst, Uwe ; Kiyak, Y. ; Kaffenberger, M. ; Madia, M. ; Oechsner, M. (2024)
Effect of the parameters of weld toe geometry on the FAT class as obtained by means of fracture mechanics-based simulations.
In: Welding in the World : The International Journal of Materials Joining, 2020, 64 (6)
doi: 10.26083/tuprints-00024006
Article, Secondary publication, Publisher's Version
Seiler, Patrick M. ; Roisman, Ilia V. ; Tropea, Cameron (2024)
Interaction between an aerodynamically driven, wall-bound drop and a single groove.
In: The European Physical Journal Special Topics, 2020, 229 (10)
doi: 10.26083/tuprints-00023992
Article, Secondary publication, Publisher's Version
Bauer, Andreas ; Bopp, Maximilian ; Jakirlic, Suad ; Tropea, Cameron ; Krafft, Axel Joachim ; Shokina, Nina ; Hennig, Jürgen (2024)
Analysis of the wall shear stress in a generic aneurysm under pulsating and transitional flow conditions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (2)
doi: 10.26083/tuprints-00023899
Article, Secondary publication, Publisher's Version
Steinhausen, Christoph ; Gerber, Valerie ; Preusche, Andreas ; Weigand, Bernhard ; Dreizler, Andreas ; Lamanna, Grazia (2024)
On the potential and challenges of laser-induced thermal acoustics for experimental investigation of macroscopic fluid phenomena.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2021, 62 (1)
doi: 10.26083/tuprints-00023901
Article, Secondary publication, Publisher's Version
Brockmann, Philipp ; Kazerooni, Hamid Tabaei ; Brandt, Luca ; Hussong, Jeanette (2024)
Utilizing the ball lens effect for astigmatism particle tracking velocimetry.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2020, 61 (2)
doi: 10.26083/tuprints-00023900
Article, Secondary publication, Publisher's Version
Schell, Lukas (2024)
Entwicklungsmethodik für transparente Modellversuche in der Blechumformung am Beispiel von Wärmeübergangskoeffizienten und Tribologie.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026916
Ph.D. Thesis, Primary publication, Publisher's Version
Mattfeldt, Philipp ; Latsch, Bastian ; Hielscher, Jürgen ; Desch, Sascha ; Schäfer, Niklas ; Chadda, Romal ; Werthschützky, Roland ; Seyfarth, André ; Kupnik, Mario (2024)
Maschinelles Lernen für die Situationserkennung einer aktiven Kniegelenkorthese.
14. VDI/VDE Mechatronik-Tagung 2021. Darmstadt, Germany (online) (24.03.2021-25.03.2021)
doi: 10.26083/tuprints-00026959
Conference or Workshop Item, Secondary publication, Publisher's Version
Brockhaus, Benjamin (2024)
Modellierung von Edge-Computing-Clustern zur Ermittlung ressourceneffizienter Softwareverteilungen in der Produktion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026739
Ph.D. Thesis, Primary publication, Publisher's Version
Heier, Henrik (2024)
Prognosis based decision support for improved system availability.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026661
Ph.D. Thesis, Primary publication, Publisher's Version
Wauri, Danny (2024)
Verkehrsverhalten und Verkehrsablauf auf Fernstraßen mit eHighway-System.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026899
Ph.D. Thesis, Primary publication, Publisher's Version
Seiler, Julian ; Schäfer, Niklas ; Latsch, Bastian ; Chadda, Romol ; Hessinger, Markus ; Beckerle, Philipp ; Kupnik, Mario (2024)
Wearable Vibrotactile Interface Using Phantom Tactile Sensation for Human-Robot Interaction.
In: Haptics: Science, Technology, Applications : 12th International Conference, EuroHaptics 2020 Leiden, The Netherlands, September 6–9, 2020 Proceedings, 2020
doi: 10.26083/tuprints-00026958
Book Section, Secondary publication, Publisher's Version
Gebhard, Florian (2024)
Investigations toward the accumulation, separation, mixing and detection of charged species using microfluidic electrophoresis.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026944
Ph.D. Thesis, Primary publication, Publisher's Version
Parekh, Vivek (2024)
Deep Learning based Design and Optimization of Electrical Machines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027003
Ph.D. Thesis, Primary publication, Publisher's Version
Peters, Timon Alexander (2024)
Dünnglas - Prüfverfahren für Architekturanwendungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026974
Ph.D. Thesis, Primary publication, Publisher's Version
Rothmann-Brumm, Pauline (2024)
Visualisierung, Analyse und Modellierung von fluiddynamischen Musterbildungsphänomenen im Zylinderspalt unter Anwendung von Maschinellem Lernen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026770
Ph.D. Thesis, Primary publication, Publisher's Version
Li, Min-Ken (2024)
Electrically Driven Light Emission from Carbon Nanotubes with Quantum Defects.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026973
Ph.D. Thesis, Primary publication, Publisher's Version
Steinebach, Tim ; Wakula, Jurij ; Bruder, Ralph ; Paulke, Maximilian (2024)
Entwicklung einer ergonomischen Lagerplatzvergabe in der manuellen Person-zur-Ware Kommissionierung.
In: Zeitschrift für Arbeitswissenschaft, 2021, 75 (3)
doi: 10.26083/tuprints-00023560
Article, Secondary publication, Publisher's Version
Steinhausen, Matthias (2024)
Modeling of near-wall flame dynamics in laminar and turbulent combustion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026957
Ph.D. Thesis, Primary publication, Publisher's Version
Jaeger, Fabian ; Franceschi, Alessandro ; Hoche, Holger ; Groche, Peter ; Oechsner, Matthias (2024)
Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023468
Article, Secondary publication, Publisher's Version
Müller, Andreas Lars ; Abendroth, Bettina (2024)
Übernahmeaufforderungen beim hochautomatisierten Fahren mit fahrfremden Tätigkeiten – welche Modalitäten sind geeignet?
In: Zeitschrift für Arbeitswissenschaft, 2022, 76 (3)
doi: 10.26083/tuprints-00023561
Article, Secondary publication, Publisher's Version
Hündling, Jannek (2024)
Nachhaltigkeit in produzierenden Unternehmen durch
Digitalisierung: Konzept zur Nutzung digitaler Technologien
zur Erreichung und Verbesserung von Nachhaltigkeitszielen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026961
Master Thesis, Primary publication, Publisher's Version
Suckow, Timon ; Schroeder, Julius ; Groche, Peter (2024)
Roll forming of a high strength AA7075 aluminum tube.
In: Production Engineering : Research and Development, 2021, 15 (3-4)
doi: 10.26083/tuprints-00023537
Article, Secondary publication, Publisher's Version
Wolf, Christian (2024)
Untersuchung zur Benetzung löslicher Polymersubstrate und einhergehender Oberflächenveränderungen am System Polystyrol-Toluol.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026780
Ph.D. Thesis, Primary publication, Publisher's Version
Hummel, Nicolas (2024)
Systemische Analyse und Bewertung der Well-to-Wheel CO₂-Bilanz verschiedener Antriebs- und Energiesystemkombinationen in nutzfahrzeugspezifischen Anwendungen.
doi: 10.26083/tuprints-00026952
Book, Secondary publication, Publisher's Version
Meyer, Guillaume Bertrand Thibaut (2024)
Towards implementing lattice structures into load-bearing lightweight components.
doi: 10.26083/tuprints-00026946
Book, Secondary publication, Publisher's Version
Valizadeh, Iman (2024)
Additive Manufacturing, Experimental Characterization, and Constitutive Modeling of Functionally Graded Polymeric Structures.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026756
Ph.D. Thesis, Primary publication, Publisher's Version
Kraus, Benjamin (2024)
Eine digital unterstützte Methodik zur sensorischen Nutzung von Konstruktionselementen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026617
Ph.D. Thesis, Primary publication, Publisher's Version
Weber, Carl Fridolin (2024)
Studies on Gloss of Printed Surfaces.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026741
Ph.D. Thesis, Primary publication, Publisher's Version
Demel, Daniel ; Schütz, Thomas ; Kölzer, Christian ; Tropea, Cameron (2024)
Anwendungen für Mehrphasen-CFD am Fahrzeugexterieur.
In: Forschung im Ingenieurwesen = Engineering Research, 2021, 85 (2)
doi: 10.26083/tuprints-00023473
Article, Secondary publication, Publisher's Version
Zhou, Xiandong ; Reimuth, Christoph ; Stein, Peter ; Xu, Bai-Xiang (2024)
Driving forces on dislocations: finite element analysis in the context of the non-singular dislocation theory.
In: Archive of Applied Mechanics, 2021, 91 (11)
doi: 10.26083/tuprints-00023469
Article, Secondary publication, Publisher's Version
Moosavifard, Arezoo (2024)
Investigating the Aeroacoustic Performance of the Partially Averaged Navier-Stokes Method.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026644
Ph.D. Thesis, Primary publication, Publisher's Version
Merkel, Anna Melina (2024)
Isogeometric Modeling, Simulation and Optimization of Rotating Electric Machines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026599
Ph.D. Thesis, Primary publication, Publisher's Version
Brockmann, Philipp ; Hussong, Jeanette (2024)
On the calibration of Astigmatism particle tracking velocimetry for suspensions of different volume fractions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2021, 62 (1)
doi: 10.26083/tuprints-00023464
Article, Secondary publication, Publisher's Version
Jasper, Sarah ; Hussong, Jeanette ; Lindken, Ralph (2024)
PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions.
In: Experiments in Fluids : Experimental Methods and their Applications to Fluid Flow, 2021, 62 (5)
doi: 10.26083/tuprints-00023465
Article, Secondary publication, Publisher's Version
Pratomo, Hariyo P S ; Bremhorst, Klaus (2024)
Radial profile of moments of instantaneous axial velocity of a fully pulsed axisymmetric jet.
In: Journal of Physics: Conference Series, 2014, 495 (1)
doi: 10.26083/tuprints-00020744
Article, Secondary publication, Publisher's Version
Hornung, Daniel ; Spreckelsen, Florian ; Weiß, Thomas (2024)
Agile Research Data Management with Open Source: LinkAhead.
In: ing.grid : FAIR data management in engineering sciences, 2024, 1 (2)
doi: 10.26083/tuprints-00026927
Article, Secondary publication, Publisher's Version
Brunk, Aaron ; Dünweg, Burkhard ; Egger, Herbert ; Habrich, Oliver ; Lukáčová-Medvid'ová, Mária ; Spiller, Dominic (2024)
Analysis of a viscoelastic phase separation model.
In: Journal of Physics: Condensed Matter, 2021, 33 (23)
doi: 10.26083/tuprints-00020427
Article, Secondary publication, Publisher's Version
Silva Pimenta, Izadora (2024)
Critically thinking about the reusability of (meta)data.
In: ing.grid : FAIR data management in engineering sciences, 2024, 2 (1)
doi: 10.26083/tuprints-00026929
Article, Secondary publication, Publisher's Version
Diercks, Philipp ; Gläser, Dennis ; Lünsdorf, Ontje ; Selzer, Michael ; Flemisch, Bernd ; Unger, Jörg F. (2024)
Evaluation of tools for describing, reproducing and reusing scientific workflows.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (1)
doi: 10.26083/tuprints-00026406
Article, Secondary publication, Publisher's Version
Schnur, Christopher ; Dorst, Tanja ; Deshmukh, Kapil ; Zimmer, Sarah ; Litzenburger, Philipp ; Schneider, Tizian ; Margies, Lennard ; Müller, Rainer ; Schütze, Andreas (2024)
PIA - A Concept for a Personal Information Assistant for Data Analysis and Machine Learning of Time-Continuous Data in Industrial Applications.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (2)
doi: 10.26083/tuprints-00026427
Article, Secondary publication, Publisher's Version
Gehring, Petra (2024)
Sharing Data - Is It All About An "Openness" Economy?
In: ing.grid : FAIR data management in engineering sciences, 2024, 2 (1)
doi: 10.26083/tuprints-00026928
Article, Secondary publication, Publisher's Version
Ferenz, Stephan ; Nieße, Astrid (2024)
Towards Improved Findability of Energy Research Software by Introducing a Metadata-based Registry.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (2)
doi: 10.26083/tuprints-00026428
Article, Secondary publication, Publisher's Version
Bedürftig, Benjamin (2024)
Equivalent Circuit Dynamic Modeling and Parametrization of Lithium-Ion Cells.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026773
Ph.D. Thesis, Primary publication, Publisher's Version
Kircher, Magnus (2024)
Modeling and scale-resolving simulations of knocking combustion initiation in a spark ignition engine.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026772
Ph.D. Thesis, Primary publication, Publisher's Version
Üyümez, Bilal (2024)
Modulare Systemarchitektur für einen robusten vollautomatisierten Bahnbetrieb.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026671
Ph.D. Thesis, Primary publication, Publisher's Version
Gloerfeld, Mark ; Roisman, Ilia V. ; Hussong, Jeanette ; Tropea, Cameron (2024)
Measurements and modelling of the residual mass upon impact of supercooled liquid drops.
In: Experiments in Fluids, 2021, 62 (10)
doi: 10.26083/tuprints-00023461
Article, Secondary publication, Publisher's Version
Blahout, Sebastian ; Reinecke, Simon R. ; Kruggel-Emden, Harald ; Hussong, Jeanette (2024)
On the micro-PIV accuracy and reliability utilizing non-Gaussian particle images.
In: Experiments in Fluids, 2021, 62 (9)
doi: 10.26083/tuprints-00023462
Article, Secondary publication, Publisher's Version
Deyn, Lars H. von ; Schmidt, Marius ; Örlü, Ramis ; Stroh, Alexander ; Kriegseis, Jochen ; Böhm, Benjamin ; Frohnapfel, Bettina (2024)
Ridge-type roughness: from turbulent channel flow to internal combustion engine.
In: Experiments in Fluids, 2022, 63 (1)
doi: 10.26083/tuprints-00023460
Article, Secondary publication, Publisher's Version
Eberhard, A. ; Stähler, M. ; Beyer, S. ; Klein, M. ; Oechsner, M. (2024)
Temperaturabhängiges Anzieh- und Löseverhalten von Schraubenverbindungen mit Zinklamellenüberzügen.
In: Forschung im Ingenieurwesen = Engineering Research, 2021, 85 (2)
doi: 10.26083/tuprints-00023450
Article, Secondary publication, Publisher's Version
Blohm, Annika ; Kumar, Swatantar ; Knebl, Andreas ; Herrmann, Martina ; Küsel, Kirsten ; Popp, Jürgen ; Frosch, Torsten (2024)
Activity and electron donor preference of two denitrifying bacterial strains identified by Raman gas spectroscopy.
In: Analytical and Bioanalytical Chemistry, 2022, 414 (1)
doi: 10.26083/tuprints-00023436
Article, Secondary publication, Publisher's Version
Meyer-Coors, Michael ; Kienzler, Reinhold ; Schneider, Patrick (2024)
Modularity of the displacement coefficients and complete plate theories in the framework of the consistent-approximation approach.
In: Continuum Mechanics and Thermodynamics, 2021, 33 (4)
doi: 10.26083/tuprints-00023441
Article, Secondary publication, Publisher's Version
Franceschi, A. ; Stahl, J. ; Kock, C. ; Selbmann, R. ; Ortmann-Ishkina, S. ; Jobst, A. ; Merklein, M. ; Kuhfuß, B. ; Bergmann, M. ; Behrens, B.-A. ; Volk, W. ; Groche, P. (2024)
Strategies for residual stress adjustment in bulk metal forming.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023446
Article, Secondary publication, Publisher's Version
Laveglia, Agustin (2024)
Towards Net-Zero and Carbon-Negative Transformations in Lime-Based Construction Materials.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026734
Ph.D. Thesis, Primary publication, Publisher's Version
Johann, Felix ; Becker, David ; Becker, Matthias ; Hoss, Matthias ; Löwer, Alexander ; Förste, Christoph (2024)
The influence of the Earth's magnetic field on strapdown inertial gravimetry using Q-Flex accelerometers: static and dynamic experiments.
In: Journal of Geodesy, 2021, 95 (9)
doi: 10.26083/tuprints-00023440
Article, Secondary publication, Publisher's Version
Abu Haila, Tarek (2024)
The Impact of Cross-Polarization on RGB Imaging, Color Calibration and Accuracy.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026761
Ph.D. Thesis, Primary publication, Publisher's Version
Schmitz, Robert Martin (2024)
Modeling Nanoparticle Formation in Reactive Flows with Quadrature-based Moment Methods.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026764
Ph.D. Thesis, Primary publication, Publisher's Version
Reinhardt, Hanna (2024)
A hybrid LES-CAA approach for the simulation and analysis of thermoacoustics in aero-engines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026738
Ph.D. Thesis, Primary publication, Publisher's Version
Endo, Satoshi ; Fröhner, Jakob ; Musić, Selma ; Hirche, Sandra ; Beckerle, Philipp (2024)
Effect of External Force on Agency in Physical Human-Machine Interaction.
In: Frontiers in Human Neuroscience, 2020, 14
doi: 10.26083/tuprints-00016633
Article, Secondary publication, Publisher's Version
Ege Cansev, Mehmet ; Nordheimer, Daniel ; Kirchner, Elsa Andrea ; Beckerle, Philipp (2024)
Feel-Good Requirements: Neurophysiological and Psychological Design Criteria of Affective Touch for (Assistive) Robots.
In: Frontiers in Neurorobotics, 2021, 15
doi: 10.26083/tuprints-00019567
Article, Secondary publication, Publisher's Version
Thaler, Anne ; Piryankova, Ivelina ; Stefanucci, Jeanine K. ; Pujades, Sergi ; Rosa, Stephan de la ; Streuber, Stephan ; Romero, Javier ; Black, Michael J. ; Mohler, Betty J. (2024)
Visual Perception and Evaluation of Photo-Realistic Self-Avatars From 3D Body Scans in Males and Females.
In: Frontiers in ICT, 2018, 5
doi: 10.26083/tuprints-00016777
Article, Secondary publication, Publisher's Version
Triller, J. ; Immel, R. ; Timmer, A. ; Harzheim, L. (2024)
The difference-based equivalent static load method: an improvement of the ESL method’s nonlinear approximation quality.
In: Structural and Multidisciplinary Optimization, 2021, 63 (6)
doi: 10.26083/tuprints-00023434
Article, Secondary publication, Publisher's Version
Torricelli, Diego ; Rodriguez-Guerrero, Carlos ; Veneman, Jan F. ; Crea, Simona ; Briem, Kristin ; Lenggenhager, Bigna ; Beckerle, Philipp (2024)
Benchmarking Wearable Robots: Challenges and Recommendations From Functional, User Experience, and Methodological Perspectives.
In: Frontiers in Robotics and AI, 2020, 7
doi: 10.26083/tuprints-00016183
Article, Secondary publication, Publisher's Version
Roussanaly, Simon ; Ouassou, Jabir A. ; Anantharaman, Rahul ; Haaf, Martin (2024)
Impact of Uncertainties on the Design and Cost of CCS From a Waste-to-Energy Plant.
In: Frontiers in Energy Research, 2020, 8
doi: 10.26083/tuprints-00016112
Article, Secondary publication, Publisher's Version
Mori, Ken Thaddäus (2024)
Defining object detection requirements for safe automated driving.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026622
Ph.D. Thesis, Primary publication, Publisher's Version
Storms, Kai Hendrik (2024)
Context Aware Data Reduction for Highly Automated Driving.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026704
Ph.D. Thesis, Primary publication, Publisher's Version
Reitzel, Julian (2024)
Development of an unstructured Finite Volume Level Set Method in OpenFOAM.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023761
Master Thesis, Primary publication, Publisher's Version
Nazari Sam, Mona (2024)
Enhancing Thermal Energy Storage in blended cementitious Composites through Sensible and Latent Heat Integration.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026680
Ph.D. Thesis, Primary publication, Publisher's Version
Gampert, Markus ; Goebbert, Jens Henrik ; Schaefer, Philip ; Gauding, Michael ; Peters, Norbert ; Aldudak, Fettah ; Oberlack, Martin (2024)
Extensive strain along gradient trajectories in the turbulent kinetic energy field.
In: New Journal of Physics, 2011, 13 (4)
doi: 10.26083/tuprints-00020563
Article, Secondary publication, Publisher's Version
Birk, Frederik ; Ali, Fares ; Weigold, Matthias ; Abele, Eberhard ; Schützer, Klaus (2024)
Lightweight hybrid CFRP design for machine tools with focus on simple manufacturing.
In: The International Journal of Advanced Manufacturing Technology, 2020, 108 (11-12)
doi: 10.26083/tuprints-00023868
Article, Secondary publication, Publisher's Version
Kott, Matthäus ; Echler, Daniel ; Groche, Peter (2024)
Methodological approach for the development of an operator assistance system for the press shop.
In: The International Journal of Advanced Manufacturing Technology, 2022, 119 (3-4)
doi: 10.26083/tuprints-00023457
Article, Secondary publication, Publisher's Version
Schürmann, Tim ; Beckerle, Philipp (2024)
Personalizing Human-Agent Interaction Through Cognitive Models.
In: Frontiers in Psychology, 2020, 11
doi: 10.26083/tuprints-00015957
Article, Secondary publication, Publisher's Version
Suckow, Timon (2024)
Temperaturunterstützte Prozessketten zum Rollformen und Laserstrahlschweißen hochfester Profile aus der Aluminiumlegierung EN AW-7075.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026683
Ph.D. Thesis, Primary publication, Publisher's Version
Moneke, Matthias ; Groche, Peter (2024)
The origin of end flare in roll formed profiles.
In: International Journal of Material Forming, 2021, 14 (6)
doi: 10.26083/tuprints-00023547
Article, Secondary publication, Publisher's Version
Greco-Coppi, Martin ; Hofmann, Carina ; Ströhle, Jochen (2024)
Advanced indirectly heated carbonate looping process (ANICA) – Final report.
doi: 10.26083/tuprints-00026729
Report, Secondary publication, Publisher's Version
Methfessel, Thomas (2024)
Thermomechanische Modellierung und bruchmechanische Versagensanalyse von dickschichtigen Klebverbindungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026691
Ph.D. Thesis, Primary publication, Publisher's Version
Laumann, Daniel (2024)
Untersuchung der Bauteilhaftung in der Fused Filament Fabrication.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026645
Ph.D. Thesis, Primary publication, Publisher's Version
Koert, Johannes (2024)
Bewertung von Unsicherheiten beim Variantenvergleich energetischer Quartierssanierungen: Entwicklung eines Simulationsmodells zur Berücksichtigung streuender Einflussgrößen über den Lebenszyklus bei der ökonomischen und ökologischen Bewertung von Wohnquartieren.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024361
Ph.D. Thesis, Primary publication, Publisher's Version
Kessler, Thomas Valentin (2024)
Krümmungsmessung und Regelung mehrstufiger Prozesse beim Drei-Rollen-Biegen von Profilen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026618
Ph.D. Thesis, Primary publication, Publisher's Version
Suzuki, Issei ; Lin, Zexin ; Nogami, Taichi ; Kawanishi, Sakiko ; Huang, Binxiang ; Klein, Andreas ; Omata, Takahisa (2024)
High open-circuit voltage in single-crystalline n-type SnS/MoO₃ photovoltaics.
In: APL Materials, 2023, 11 (3)
doi: 10.26083/tuprints-00026512
Article, Secondary publication, Publisher's Version
Shojaee, Mohammad ; Valizadeh, Iman ; Klein, Dominik K. ; Sharifi, P. ; Weeger, Oliver (2024)
Multiscale modeling of functionally graded shell lattice metamaterials for additive manufacturing.
In: Engineering with Computers, 2023
doi: 10.26083/tuprints-00026475
Article, Secondary publication, Publisher's Version
Braig, Felix (2024)
Untersuchung der Lösungsmittelatmosphäre von verdunstenden, gedruckten Fluidfilmen mittels digitaler, holographischer Interferometrie.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026632
Ph.D. Thesis, Primary publication, Publisher's Version
Silva, Carina da (2024)
ActiveSkin - Thermisch aktivierte Fassadensysteme im Industriesektor.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026579
Ph.D. Thesis, Primary publication, Publisher's Version
Schmidt, Marius (2024)
Experimental Investigations of Near-Wall Processes in an Optically Accessible Spark-Ignition Engine.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026620
Ph.D. Thesis, Primary publication, Publisher's Version
Gajević Joksimović, Marija (2024)
From Single Drop to Spray Cooling: Influence of Lubricant Addition on Heat Transfer.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026647
Ph.D. Thesis, Primary publication, Publisher's Version
Bobzin, K. ; Wietheger, W. ; Heinemann, H. ; Schulz, M. ; Oechsner, M. ; Engler, T. ; Scheerer, H. ; Joung, Y. (2024)
Thermisch gespritzte Beschichtungen für den Armaturenbau.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (9)
doi: 10.26083/tuprints-00020998
Article, Secondary publication, Publisher's Version
Dieringer, Paul (2024)
Demonstration and Optimization of the Chemical Looping Gasification Technology in 1 MWth Scale.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026623
Ph.D. Thesis, Primary publication, Publisher's Version
Schulte, Jonas Valentin (2024)
Neuromorphic Perception using Time-of-Flight-based Encoding of Lidar Data : A Potential and Feasibility Study.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026641
Master Thesis, Primary publication, Publisher's Version
Bütev Öcal, Ezgi ; Sajadifar, Seyed Vahid ; Sellner, Erik P. K. ; Vollmer, Malte ; Heidarzadeh, Akbar ; Zavašnik, Janez ; Niendorf, Thomas ; Groche, Peter (2024)
Functionally Graded AA7075 Components Produced via Hot Stamping: A Novel Process Design Inspired from Analysis of Microstructure and Mechanical Properties.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024683
Article, Secondary publication, Publisher's Version
Kraemer, A.‐K. ; Klein, M. ; Oechsner, M. ; Grote, J. ; Ungermann, D. (2024)
Geschraubte, gleitfest vorgespannte Verbindungen an feuerverzinkten Brückenbauteilen unter zyklischen Beanspruchungen.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024668
Article, Secondary publication, Publisher's Version
Lehrich, Luca ; Adiche, Chafika (2024)
Process Intensification for the Recovery of Hydrogen Cyanide in the Andrussow Process.
In: Chemie Ingenieur Technik, 2023, 95 (10)
doi: 10.26083/tuprints-00024671
Article, Secondary publication, Publisher's Version
Niwinski, T. J. ; Kraemer, F. ; Klein, M. ; Oechsner, M. ; Herter, S. ; Becker, M. M. (2024)
Ultraschallbasierte in situ Vorspannkraftermittlung an Schrauben ohne Referenzmessung im nicht verspannten Zustand durch Kombination von Longitudinal‐ und Transversalwellen.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024670
Article, Secondary publication, Publisher's Version
Schäfer, Nils (2024)
Low-temperature co-sputtering for interlayer-free high performance Nb₃Sn thin film coated copper SRF cavities.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024755
Ph.D. Thesis, Primary publication, Publisher's Version
Geschwindner, Christopher Frank Wolfgang (2024)
Optical diagnostics for carbonaceous solid fuels and flame retarded polymers in laminar and turbulent flows.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026616
Ph.D. Thesis, Primary publication, Publisher's Version
Oberlack, Martin ; Rosteck, Andreas (2024)
Applications of the new symmetries of the multi-point correlation equations.
In: Journal of Physics: Conference Series, 2011, 318 (4)
doi: 10.26083/tuprints-00020770
Article, Secondary publication, Publisher's Version
Khujadze, George ; Nguyen van Yen, Romain ; Schneider, Kai ; Oberlack, Martin ; Farge, Marie (2024)
Coherent vorticity extraction in turbulent boundary layers using orthogonal wavelets.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020768
Article, Secondary publication, Publisher's Version
Gampert, Markus ; Goebbert, Jens Henrik ; Schaefer, Philip ; Gauding, Michael ; Peters, Norbert ; Aldudak, Fettah ; Oberlack, Martin (2024)
Compressive and extensive strain along gradient trajectories.
In: Journal of Physics: Conference Series, 2011, 318 (5)
doi: 10.26083/tuprints-00020772
Article, Secondary publication, Publisher's Version
Hasegawa, Yosuke ; Frohnapfel, Bettina ; Kasagi, Nobuhide (2024)
Effects of spatially varying slip length on friction drag reduction in wall turbulence.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020769
Article, Secondary publication, Publisher's Version
Fischer, S. ; Slomski, E. M. ; Stephan, P. ; Oechsner, M. (2024)
Enhancement of nucleate boiling heat transfer by micro-structured chromium nitride surfaces.
In: Journal of Physics: Conference Series, 2012, 395 (1)
doi: 10.26083/tuprints-00020792
Article, Secondary publication, Publisher's Version
Budakli, Mete ; Gambaryan-Roisman, Tatiana ; Stephan, Peter (2024)
Influence of Surface Topography on Heat Transfer in Shear-Driven Liquid Films.
In: Journal of Physics: Conference Series, 2012, 395 (1)
doi: 10.26083/tuprints-00020794
Article, Secondary publication, Publisher's Version
Wacławczyk, M. ; Oberlack, M. (2024)
Invariant closure proposals for the interface tracking in two-phase turbulent flows.
In: Journal of Physics: Conference Series, 2011, 318 (4)
doi: 10.26083/tuprints-00020771
Article, Secondary publication, Publisher's Version
Wetterich, Philipp ; Kuhr, Maximilian M. G. ; Pelz, Peter F. (2024)
Model-Based Condition Monitoring of Modular Process Plants.
In: Processes, 2023, 11 (9)
doi: 10.26083/tuprints-00026446
Article, Secondary publication, Publisher's Version
Schmitz, Christian ; Pelz, Peter F. (2024)
Optimal control of tidal flow.
In: Journal of Fluid Mechanics, 2023, 962
doi: 10.26083/tuprints-00026451
Article, Secondary publication, Publisher's Version
Klein, Dominik K. ; Roth, Fabian J. ; Valizadeh, Iman ; Weeger, Oliver (2024)
Parametrized polyconvex hyperelasticity with physics-augmented neural networks.
In: Data-Centric Engineering, 2023, 4
doi: 10.26083/tuprints-00026472
Article, Secondary publication, Publisher's Version
Utama, Prasetya Ajie (2024)
Robustness of Pre-trained Language Models for Natural Language Understanding.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026582
Ph.D. Thesis, Primary publication, Publisher's Version
Zimmermann, Adrian (2024)
Entwicklung eines Modells zur Berechnung von Kontaktwinkeln auf Zementstein unter Berücksichtigung der relativen Feuchte.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026547
Ph.D. Thesis, Primary publication, Publisher's Version
Heng, Yi ; Mhamdi, Adel ; Wagner, Enno ; Stephan, Peter ; Marquardt, Wolfgang (2024)
Identification of boiling heat fluxes in a single-bubble nucleate boiling experiment using a three-dimensional transient heat conduction model.
In: Journal of Physics: Conference Series, 2008, 135 (1)
doi: 10.26083/tuprints-00020679
Article, Secondary publication, Publisher's Version
Kirillov, Oleg N. (2024)
Untwisting the Campbell diagrams of weakly anisotropic rotor systems.
In: Journal of Physics: Conference Series, 2009, 181 (1)
doi: 10.26083/tuprints-00020682
Article, Secondary publication, Publisher's Version
Klein, Jens Martin (2024)
Zur Gestaltung adhäsiver Laminatstirnverankerungen und Prozessanalyse zur Fertigung thermoplastischer Faserverbundrohre.
Beiträge zur Weiterentwicklung modularer Druckbehälter nach der Darmstädter Bauweise.
doi: 10.26083/tuprints-00026500
Book, Secondary publication, Publisher's Version
Eberhard, A. ; Beyer, S. ; Klein, M. ; Oechsner, M. (2024)
Übertragung von Methoden zur Kenngrößenermittlung des selbsttätigen Losdrehens für Versuche am Vibrationsprüfstand nach Junker auf Versuche an einem neuentwickelten Prüfaufbau für
Einschraubenverbindungen mit kurzer Klemmlänge unter Verwendung eines Axialpulsers.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (2)
doi: 10.26083/tuprints-00017457
Article, Secondary publication, Publisher's Version
Wang, Cheng ; Popp, Christoph ; Winner, Hermann (2024)
Acceleration-Based Collision Criticality Metric for Holistic Online Safety Assessment in Automated Driving.
In: IEEE Access, 2022, 10
doi: 10.26083/tuprints-00026574
Article, Secondary publication, Publisher's Version
Guckes, Lennart ; Hoffmann, Jens ; Schrimpf, Malte ; Winner, Hermann (2024)
“Evaluation of an electromagnetically actuated drum brake concept”.
In: Automotive and Engine Technology, 2023, 8 (2)
doi: 10.26083/tuprints-00026571
Article, Secondary publication, Publisher's Version
Michler, T. ; Bruder, E. ; Lindner, S. (2024)
Hydrogen effects in X30MnCrN16‐14 austenitic steel.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2020, 51 (4)
doi: 10.26083/tuprints-00016735
Article, Secondary publication, Publisher's Version
Heider, B. ; Oechsner, M. ; Engler, T. ; Ellermeier, J. ; Reisgen, U. ; Sharma, R. ; Zokoll, E. ; Gonzalez, E. (2024)
Influence of carbon diffusion on microstructure and wear behaviour of duplex stainless steel surface layers on lamellar grey cast iron.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2019, 50 (10)
doi: 10.26083/tuprints-00016742
Article, Secondary publication, Publisher's Version
Heider, B. ; Scharifi, E. ; Engler, T. ; Oechsner, M. ; Steinhoff, K. (2024)
Influence of heated forming tools on corrosion behavior of high strength aluminum alloys.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (2)
doi: 10.26083/tuprints-00017434
Article, Secondary publication, Publisher's Version
Walther, Jessica ; Dietrich, Bastian ; Grosch, Benedikt Emanuel ; Lindner, Martin ; Fuhrländer-Völker, Daniel ; Strobel, Nina ; Weigold, Matthias (2024)
A Methodology for the Classification and Characterisation of Industrial Demand-Side Integration Measures.
In: Energies, 2022, 15 (3)
doi: 10.26083/tuprints-00026565
Article, Secondary publication, Publisher's Version
Haugwitz, Christoph ; Hartmann, Claas ; Allevato, Gianni ; Rutsch, Matthias ; Hinrichs, Jan ; Brötz, Johannes ; Bothe, Dieter ; Pelz, Peter F. ; Kupnik, Mario (2024)
Multipath Flow Metering of High-Velocity Gas Using Ultrasonic Phased-Arrays.
In: IEEE Open Journal of Ultrasonics, Ferroelectrics, and Frequency Control, 2022, 2
doi: 10.26083/tuprints-00026560
Article, Secondary publication, Publisher's Version
Mehrnia, Seyedmajid ; Kerres, Lara ; Kuhr, Maximilian M. G. ; Pelz, Peter F. (2024)
Rheological modelling of viscoelastic fluid in a generic gap of screw pump.
International Conference on Screw Machines (ICSM 2022). Dortmund, Germany (07.09.2022-08.09.2022)
doi: 10.26083/tuprints-00026566
Conference or Workshop Item, Secondary publication, Publisher's Version
Pelz, Peter F. ; Corneli, Tobias ; Mehrnia, Seyedmajid ; Kuhr, Maximilian M. G. (2024)
Temperature-dependent wall slip of Newtonian lubricants.
In: Journal of Fluid Mechanics, 2022, 948
doi: 10.26083/tuprints-00026573
Article, Secondary publication, Publisher's Version
Schmiedl, Tobias ; Gramlich, Alexander R. M. ; Schönborn, Steffen ; Melz, Tobias (2024)
Behavior of Forging Steels under Cyclic Loading — the Benefit of Air‐Hardening Martensites.
In: Steel research international, 2020, 91 (11)
doi: 10.26083/tuprints-00016164
Article, Secondary publication, Publisher's Version
Georg, Niklas ; Römer, Ulrich (2024)
Conformally mapped polynomial chaos expansions for Maxwell's source problem with random input data.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2020, 33 (6)
doi: 10.26083/tuprints-00016182
Article, Secondary publication, Publisher's Version
Trabold, Johannes Ludwig (2024)
Flame Topology and Thermochemical States in Laminar and Turbulent Biofuel Flames.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026491
Ph.D. Thesis, Primary publication, Publisher's Version
Gehringer, Maximilian (2024)
Prototyping lead-free Na₀.₅Bi₀.₅TiO₃-based multilayer ceramic capacitors.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026501
Ph.D. Thesis, Primary publication, Publisher's Version
Kraemer, Fabian ; Stähler, Michael ; Klein, Marcus ; Oechsner, Matthias (2024)
Einfluss von Schmierstoffsystemen auf die Ermüdungsbeanspruchbarkeit von Schraubenverbindungen.
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024664
Article, Secondary publication, Publisher's Version
Aldudak, Fettah ; Oberlack, Martin (2024)
Length scale analysis in wall-bounded turbulent flow by means of Dissipation Elements.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020767
Article, Secondary publication, Publisher's Version
Kriegseis, J. ; Schröter, D. ; Grundmann, S. ; Tropea, C. (2024)
Online-characterization of dielectric barrier discharge plasma actuators for optimized efficiency of aerodynamical flow control applications.
In: Journal of Physics: Conference Series, 2011, 301 (1)
doi: 10.26083/tuprints-00020751
Article, Secondary publication, Publisher's Version
Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Operation of a 300 kWₜₕ Indirectly Heated Carbonate Looping Plant for CO₂ Capture from Lime Industry.
24th Fluidized Bed Conference. Gothenburg, Sweden (08.05.2022-11.05.2022)
doi: 10.26083/tuprints-00026550
Conference or Workshop Item, Primary publication, Publisher's Version
Günzel, Janosch ; Hauß, Joachim ; Groche, Peter (2024)
Opportunities, Challenges, and Influencing Factors in the Forming of Preconditioned Semi‐Finished Products Made of EN AW‐6082 and ‐7075.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024699
Article, Secondary publication, Publisher's Version
Morabito, Bruno (2024)
Risk-aware and Robust Approaches for Machine Learning-supported Model Predictive Control for Iterative Processes.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026499
Ph.D. Thesis, Primary publication, Publisher's Version
Avsarkisov, Victor S. ; Oberlack, Martin ; Khujadze, George (2024)
Turbulent Poiseuille Flow with Wall Transpiration: Analytical Study and Direct Numerical Simulation.
In: Journal of Physics: Conference Series, 2011, 318 (2)
doi: 10.26083/tuprints-00020766
Article, Secondary publication, Publisher's Version
Leštáková, Michaela ; Logan, Kevin T. ; Rehm, Imke-Sophie ; Pelz, Peter F. ; Friesen, John (2024)
Do resilience metrics of water distribution systems really assess resilience? A critical review.
In: Water Research, 2024, 248
doi: 10.26083/tuprints-00026544
Article, Secondary publication, Publisher's Version
Lindner, Martin ; Grosch, Benedikt Emanuel ; Elserafi, Ghada ; Dietrich, Bastian ; Weigold, Matthias (2024)
Holistic Approach for an Energy-Flexible Operation of a Machine Tool with Cooling Supply.
In: Energies, 2023, 16 (9)
doi: 10.26083/tuprints-00026545
Article, Secondary publication, Publisher's Version
Chandra, Caroline Karina ; Sommer, Niklas ; Heider, Ben ; Hatzky, Marcel ; Reitz, Rüdiger ; Böhm, Stefan ; Oechsner, Matthias (2024)
Influence of Friction Stir Weld Parameters on the Corrosion Susceptibility of EN AW‐7075 Weld Seam and Heat‐Affected Zone.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024701
Article, Secondary publication, Publisher's Version
Zhang, Mao-Hua ; Ding, Hui ; Egert, Sonja ; Zhao, Changhao ; Villa, Lorenzo ; Fulanović, Lovro ; Groszewicz, Pedro B. ; Buntkowsky, Gerd ; Kleebe, Hans-Joachim ; Albe, Karsten ; Klein, Andreas ; Koruza, Jurij (2024)
Tailoring high-energy storage NaNbO₃-based materials from antiferroelectric to relaxor states.
In: Nature Communications, 2023, 14 (1)
doi: 10.26083/tuprints-00026514
Article, Secondary publication, Publisher's Version
Asghar, Muhammad Hassan ; Brockmann, Philipp ; Dong, Xulan ; Niethammer, Matthias ; Maric, Tomislav ; Roisman, Ilia ; Bothe, Dieter (2024)
Asymmetry During Fast Stretching of a Liquid Bridge.
In: Chemical Engineering & Technology, 2023, 46 (9)
doi: 10.26083/tuprints-00024704
Article, Secondary publication, Publisher's Version
Emmert, Johannes ; Baroncelli, Martina ; Kley, Sani van der ; Pitsch, Heinz ; Wagner, Steven (2024)
Axisymmetric Linear Hyperspectral Absorption Spectroscopy and Residuum-Based Parameter Selection on a Counter Flow Burner.
In: Energies, 2019, 12 (14)
doi: 10.26083/tuprints-00015593
Article, Secondary publication, Publisher's Version
Martelli, Emanuele ; Alobaid, Falah (2024)
Editorial: Targeting the Optimal Design and Operational Flexibility of Steam Cycles and Steam Networks.
In: Frontiers in Energy Research, 2021, 9
doi: 10.26083/tuprints-00019968
Article, Secondary publication, Publisher's Version
Idrissi, Mohamed Salah ; Ben Salah, Nabil ; Chrigui, Mouldi (2024)
Numerical Modelling of Air Pollutant Dispersion in Complex Urban Areas: Investigation of City Parts from Downtowns Hanover and Frankfurt.
In: Fluids, 2019, 4 (3)
doi: 10.26083/tuprints-00015700
Article, Secondary publication, Publisher's Version
Del Vecchio, Alessandro ; Castellini, Claudio ; Beckerle, Philipp (2024)
Peripheral Neuroergonomics – An Elegant Way to Improve Human-Robot Interaction?
In: Frontiers in Neurorobotics, 2021, 15
doi: 10.26083/tuprints-00019632
Article, Secondary publication, Publisher's Version
Akentiev, Alexander ; Lin, Shi-Yow ; Loglio, Giuseppe ; Miller, Reinhard ; Noskov, Boris (2024)
Surface Properties of Aqueous Dispersions of Bovine Serum Albumin Fibrils.
In: Colloids and Interfaces, 2023, 7 (3)
doi: 10.26083/tuprints-00024642
Article, Secondary publication, Publisher's Version
Greco-Coppi, Martin ; Dinkova, Anna ; Hofmann, Carina ; Walter, Diethelm ; Böge, Kyra ; Ströhle, Jochen ; Epple, Bernd (2024)
Design of a 2 MWₜₕ Indirectly Heated Carbonate Looping Demonstration Facility at a Lime Plant in Germany.
7th Post Combustion Capture Conference. Pittsburgh, Pennsylvania (25.09.2023-27.09.2023)
doi: 10.26083/tuprints-00026537
Conference or Workshop Item, Secondary publication, Publisher's Version
Greco-Coppi, Martin ; Hofmann, Carina ; Ströhle, Jochen ; Epple, Bernd (2024)
Negative CO₂ Emissions in the Lime Production Using an Indirectly Heated Carbonate Looping Process.
2nd International Conference on Negative CO₂ Emissions. Chalmers University of Technology, Gothenburg, Sweden (14.06.2022-17.06.2022)
doi: 10.26083/tuprints-00026539
Conference or Workshop Item, Secondary publication, Publisher's Version
Saini, Rohit ; Karimi, Nader ; Duan, Lian ; Sadiki, Amsini ; Mehdizadeh, Amirfarhang (2024)
Effects of Near Wall Modeling in the Improved-Delayed-Detached-Eddy-Simulation (IDDES) Methodology.
In: Entropy, 2018, 20 (10)
doi: 10.26083/tuprints-00015841
Article, Secondary publication, Publisher's Version
Mahmoud, Rihab ; Jangi, Mehdi ; Fiorina, Benoit ; Pfitzner, Michael ; Sadiki, Amsini (2024)
Numerical Investigation of an OxyfuelNon-Premixed CombustionUsing a Hybrid Eulerian Stochastic Field/Flamelet Progress Variable Approach: Effects of H₂/CO₂ Enrichment and Reynolds Number.
In: Energies, 2018, 11 (11)
doi: 10.26083/tuprints-00016647
Article, Secondary publication, Publisher's Version
Keshavarzi, Behnam ; Mahmoudvand, Mohsen ; Javadi, Aliyar ; Bahramian, Alireza ; Miller, Reinhard ; Eckert, Kerstin (2024)
Salt Effects on Formation and Stability of Colloidal Gas Aphrons Produced by Anionic and Zwitterionic Surfactants in Xanthan Gum Solution.
In: Colloids and Interfaces, 2020, 4 (1)
doi: 10.26083/tuprints-00016109
Article, Secondary publication, Publisher's Version
Savuto, Elisa ; May, Jan ; Di Carlo, Andrea ; Gallucci, Katia ; Di Giuliano, Andrea ; Rapagnà, Sergio (2024)
Steam Gasification of Lignite in a Bench-Scale Fluidized-Bed Gasifier Using Olivine as Bed Material.
In: Applied Sciences, 2020, 10 (8)
doi: 10.26083/tuprints-00016616
Article, Secondary publication, Publisher's Version
Koob, Philipp ; Ferraro, Federica ; Nicolai, Hendrik ; Eggels, Ruud ; Staufer, Max ; Hasse, Christian (2024)
Large Eddy Simulation of Soot Formation in a Real Aero-Engine Combustor Using Tabulated Chemistry and a Quadrature-Based Method of Moments.
In: Journal of Engineering for Gas Turbines and Power, 2024, 146 (1)
doi: 10.26083/tuprints-00026528
Article, Secondary publication, Postprint
Klir, Stefan (2024)
Modeling of individual lighting preferences depending on various influencing parameters.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026389
Ph.D. Thesis, Primary publication, Publisher's Version
Alobaid, Falah ; Ströhle, Jochen (2024)
Special Issue "Thermochemical Conversion Processes for Solid Fuels and Renewable Energies".
In: Applied Sciences, 2021, 11 (4)
doi: 10.26083/tuprints-00017770
Article, Secondary publication, Publisher's Version
Witt, Felix ; Nwaboh, Javis ; Bohlius, Henning ; Lampert, Astrid ; Ebert, Volker (2024)
Towards a Fast, Open-Path Laser Hygrometer for Airborne Eddy Covariance Measurements.
In: Applied Sciences, 2021, 11 (11)
doi: 10.26083/tuprints-00019544
Article, Secondary publication, Publisher's Version
Nwaboh, Javis A. ; Qu, Zhechao ; Werhahn, Olav ; Ebert, Volker (2024)
Towards an Optical Gas Standard for Traceable Calibration-Free and Direct NO₂ Concentration Measurements.
In: Applied Sciences, 2021, 11 (12)
doi: 10.26083/tuprints-00019526
Article, Secondary publication, Publisher's Version
Rosemeyer, Jannik ; Neunzig, Christian ; Akbal, Cem ; Metternich, Joachim ; Kuhlenkötter, Bernd (2024)
A maturity model for digital ML tools to be used in manufacturing environments.
doi: 10.26083/tuprints-00026519
Report, Primary publication, Publisher's Version
Al-Maliki, Wisam Abed Kattea ; Mahmoud, Nabeel Sameer ; Al-Khafaji, Hussein M. H. ; Alobaid, Falah ; Epple, Bernd (2024)
Design and Implementation of the Solar Field and Thermal Storage System Controllers for a Parabolic Trough Solar Power Plant.
In: Applied Sciences, 2021, 11 (13)
doi: 10.26083/tuprints-00019573
Article, Secondary publication, Publisher's Version
Alibak, Ali Hosin ; Alizadeh, Seyed Mehdi ; Davodi Monjezi, Shaghayegh ; Alizadeh, As’ad ; Alobaid, Falah ; Aghel, Babak (2024)
Developing a Hybrid Neuro-Fuzzy Method to Predict Carbon Dioxide (CO₂) Permeability in Mixed Matrix Membranes Containing SAPO-34 Zeolite.
In: Membranes, 2022, 12 (11)
doi: 10.26083/tuprints-00022971
Article, Secondary publication, Publisher's Version
Zhen, Yongcheng ; Bao, Yong ; Zhong, Zaimin ; Rinderknecht, Stephan ; Zhou, Song (2024)
Development of a PHEV Hybrid Transmission for Low-End MPVs Based on AMT.
In: Vehicles, 2020, 2 (2)
doi: 10.26083/tuprints-00022225
Article, Secondary publication, Publisher's Version
Nwaboh, Javis A. ; Werhahn, Olav ; Ebert, Volker (2024)
H₂O Collisional Broadening Coefficients at 1.37 µm and Their Temperature Dependence: A Metrology Approach.
In: Applied Sciences, 2021, 11 (12)
doi: 10.26083/tuprints-00019546
Article, Secondary publication, Publisher's Version
Blat Belmonte, Benjamin ; Esser, Arved ; Weyand, Steffi ; Franke, Georg ; Schebek, Liselotte ; Rinderknecht, Stephan (2024)
Identification of the Optimal Passenger Car Vehicle Fleet Transition for Mitigating the Cumulative LifeCycle Greenhouse Gas Emissions until 2050.
In: Vehicles, 2020, 2 (1)
doi: 10.26083/tuprints-00022274
Article, Secondary publication, Publisher's Version
Wu, Wen-Ping ; Şopu, Daniel ; Eckert, Jürgen (2024)
Molecular Dynamics Study of the Nanoindentation Behavior of Cu₆₄Zr₃₆/Cu Amorphous/Crystalline Nanolaminate Composites.
In: Materials, 2021, 14 (11)
doi: 10.26083/tuprints-00019644
Article, Secondary publication, Publisher's Version
Obando Vega, Pedro Javier ; Coussement, Axel ; Sadiki, Amsini ; Parente, Alessandro (2024)
Non-Premixed Filtered Tabulated Chemistry: Filtered Flame Modeling of Diffusion Flames.
In: Fuels, 2021, 2 (2)
doi: 10.26083/tuprints-00022205
Article, Secondary publication, Publisher's Version
Jardin, Philippe ; Esser, Arved ; Givone, Stefano ; Eichenlaub, Tobias ; Schleiffer, Jean-Eric ; Rinderknecht, Stephan (2024)
The Sensitivity in Consumption of Different Vehicle Drivetrain Concepts Under Varying Operating Conditions: A Simulative Data Driven Approach.
In: Vehicles, 2019, 1 (1)
doi: 10.26083/tuprints-00022234
Article, Secondary publication, Publisher's Version
Schleiffer, Jean-Eric ; Harselaar, Wilco van ; Shen, Ye ; Rinderknecht, Stephan (2024)
Simulative Assessment of Novel Parallel-Hybrid-Electric Powertrains: Consideration of Transmission System Power Losses.
In: Vehicles, 2020, 2 (1)
doi: 10.26083/tuprints-00022277
Article, Secondary publication, Publisher's Version
Jardin, Philippe ; Esser, Arved ; Rinderknecht, Stephan (2024)
Special Issue on Future Powertrain Technologies.
In: Vehicles, 2020, 2 (4)
doi: 10.26083/tuprints-00022226
Article, Secondary publication, Publisher's Version
Stumpf, Bastian (2024)
Drop impact onto a thin film of another liquid.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026443
Ph.D. Thesis, Primary publication, Publisher's Version
Müller, André (2024)
Methodik zur datenbasierten Typisierung von Quartieren anhand baulicher Strukturen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026417
Ph.D. Thesis, Primary publication, Publisher's Version
Ronshin, F. ; Sielaff, A. ; Tadrist, L. ; Stephan, P. ; Kabov, O. (2024)
Dynamics of bubble growth during boiling at microgravity.
In: Journal of Physics: Conference Series, 2021, 2119 (1)
doi: 10.26083/tuprints-00020365
Article, Secondary publication, Publisher's Version
Deußen, B. ; Jayaram, A. ; Kummer, F. ; Wang, Y. ; Speck, T. ; Oberlack, M. (2024)
High-order simulation scheme for active particles driven by stress boundary conditions.
In: Journal of Physics: Condensed Matter, 2021, 33 (24)
doi: 10.26083/tuprints-00020428
Article, Secondary publication, Publisher's Version
Ostrowski, T. ; Schiffer, H.-P. (2024)
High-resolution heat transfer measurements on a rotating turbine endwall with infrared thermography.
In: Measurement Science and Technology, 2021, 32 (12)
doi: 10.26083/tuprints-00020468
Article, Secondary publication, Publisher's Version
Benkner, Simon (2024)
Investigating and Modeling the Impact of Moisture on the Reliability of Mid-Power Light-Emitting Diodes.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026493
Ph.D. Thesis, Primary publication, Publisher's Version
Li, Yaya ; Rehbock, Christoph ; Nachev, Milen ; Stamm, Jacqueline ; Sures, Bernd ; Blaeser, Andreas ; Barcikowski, Stephan (2024)
Matrix-specific mechanism of Fe ion release from laser-generated 3D-printable nanoparticle-polymer composites and their protein adsorption properties.
In: Nanotechnology, 2020, 31 (40)
doi: 10.26083/tuprints-00020475
Article, Secondary publication, Publisher's Version
Stephan, Michael ; Zentgraf, Florian ; Berrocal, Edouard ; Albert, Barbara ; Böhm, Benjamin ; Dreizler, Andreas (2024)
Multiple scattering reduction in instantaneous gas phase phosphor thermometry: applications with dispersed seeding.
In: Measurement Science and Technology, 2019, 30 (5)
doi: 10.26083/tuprints-00020465
Article, Secondary publication, Publisher's Version
Oltmanns, Johannes ; Sauerwein, David ; Dammel, Frank ; Stephan, Peter ; Kuhn, Christoph (2024)
Potential for waste heat utilization of hot‐water‐cooled data centers: A case study.
In: Energy Science & Engineering, 2020, 8 (5)
doi: 10.26083/tuprints-00016187
Article, Secondary publication, Publisher's Version
Geisenhofer, Markus ; Kummer, Florian ; Müller, Björn (2024)
A discontinuous Galerkin immersed boundary solver for compressible flows: Adaptive local time stepping for artificial viscosity-based shock‐capturing on cut cells.
In: International Journal for Numerical Methods in Fluids, 2019, 91 (9)
doi: 10.26083/tuprints-00015956
Article, Secondary publication, Publisher's Version
Mistry, Yash ; Weeger, Oliver ; Morankar, Swapnil ; Shinde, Mandar ; Liu, Siying ; Chawla, Nikhilesh ; Chen, Xiangfan ; Penick, Clint A. ; Bhate, Dhruv (2024)
Bio-inspired selective nodal decoupling for ultra-compliant interwoven lattices.
In: Communications Materials, 2023, 4 (1)
doi: 10.26083/tuprints-00026474
Article, Secondary publication, Publisher's Version
Weeger, Oliver ; Valizadeh, Iman ; Mistry, Yash ; Bhate, Dhruv (2024)
Inelastic finite deformation beam modeling, simulation, and validation of additively manufactured lattice structures.
In: Additive Manufacturing Letters, 2023, 4
doi: 10.26083/tuprints-00026473
Article, Secondary publication, Publisher's Version
Gerlitzky, C. ; Kuhn, C. ; Groche, P. ; Tran, T.H. ; Zhang, S. ; Peter, N.J. ; Rohwerder, M. (2024)
3D cold pressure welded components – From the bonding mechanisms to the production of high strength joints.
In: Materials Science & Engineering Technology - Materialwissenschaft und Werkstofftechnik, 2019, 50 (8)
doi: 10.26083/tuprints-00017430
Article, Secondary publication, Publisher's Version
Bremm, Sophia ; Hell, Sascha ; Becker, Wilfried (2024)
Convergence behaviour of the enriched scaled boundary finite element method.
In: International Journal for Numerical Methods in Engineering, 2019, 120 (7)
doi: 10.26083/tuprints-00016737
Article, Secondary publication, Publisher's Version
Dietrich, Axel ; Dammel, Frank ; Stephan, Peter (2024)
Exergoeconomic analysis of a pumped heat electricity storage system based on a Joule/Brayton cycle.
In: Energy Science & Engineering, 2020, 9 (5)
doi: 10.26083/tuprints-00017805
Article, Secondary publication, Publisher's Version
Greifenstein, M. ; Dreizler, A. (2024)
MARSFT: Efficient fitting of CARS spectra using a library‐based genetic algorithm.
In: Journal of Raman Spectroscopy, 2021, 52 (3)
doi: 10.26083/tuprints-00017817
Article, Secondary publication, Publisher's Version
Kikker, Anne ; Kummer, Florian ; Oberlack, Martin (2024)
A fully coupled high‐order discontinuous Galerkin solver for viscoelastic fluid flow.
In: International Journal for Numerical Methods in Fluids, 2021, 93 (6)
doi: 10.26083/tuprints-00017814
Article, Secondary publication, Publisher's Version
Welch, Cooper Haddad (2024)
The Influence of In-Cylinder Flows on Spark-Ignition Engine Combustion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026340
Ph.D. Thesis, Primary publication, Publisher's Version
2023
Reinders, P. M. ; Patel, R. R. ; Musekamp, J. ; Kaestner, P. ; Hoche, H. ; Bräuer, G. ; Oechsner, M. (2023)
Determination of the s‐phase formation coefficient of plasma nitrided austenitic steel.
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (2)
doi: 10.26083/tuprints-00017827
Article, Secondary publication, Publisher's Version
Reiber, T. ; Rüdesheim, J. ; Weigold, M. ; Abele, E. ; Musekamp, J. ; Oechsner, M. (2023)
Influence of contour scans on surface roughness and pore formation using Scalmalloy® manufactured by laser powder bed fusion (PBF‐LB).
In: Materials Science and Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2021, 52 (4)
doi: 10.26083/tuprints-00020136
Article, Secondary publication, Publisher's Version
Korthals, Felix Alexander (2023)
Robuste Machine-Learning-Modelle und deren Plausibilisierung für die Anwendung im PKW-Thermomanagement.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026450
Ph.D. Thesis, Primary publication, Publisher's Version
Stockinger, Christopher ; Stuke, Fokko ; Subtil, Ilka (2023)
User‐centered development of a worker guidance system for a flexible production line.
In: Human Factors and Ergonomics in Manufacturing & Service Industries, 2021, 31 (5)
doi: 10.26083/tuprints-00020131
Article, Secondary publication, Publisher's Version
Garnadt, Florian (2023)
Beschreibung der effektiven zyklischen Beanspruchungssituation im Nahfeld einer Rissspitze für elastisch-plastisches Materialverhalten.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026457
Ph.D. Thesis, Primary publication, Publisher's Version
Grosch, Benedikt Emanuel (2023)
Simplified Implementation of Energy-Aware Production Scheduling in Job Shops.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026459
Ph.D. Thesis, Primary publication, Publisher's Version
Biegel, Tobias (2023)
A self-supervised learning approach for multivariate statistical in-process control in discrete manufacturing processes.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026455
Ph.D. Thesis, Primary publication, Publisher's Version
Nguyen, Thi Hoa (2023)
Higher-order accurate and locking-free explicit dynamics in isogeometric structural analysis.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026401
Ph.D. Thesis, Primary publication, Publisher's Version
Lien, Hao-Pin (2023)
Spray-wall-flow interaction within a gasoline direct-injection (GDI) engine using Large Eddy Simulation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026430
Ph.D. Thesis, Primary publication, Publisher's Version
Neuhäusler, Josef (2023)
Zur rechnerischen Schwingfestigkeit von Schweißverbindungen basierend auf Kerbdehnungen und zum Einfluss der Schweißnahtmodellierung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026433
Ph.D. Thesis, Primary publication, Publisher's Version
Plaß, Bastian (2023)
Modellierung und Bewertung von Wohnräumen durch Smartphone-gestützte 3D-Geometrieerfassung und Maschinelles Lernen: Ein digitaler Beitrag zur Förderung des „Ageing in Place“ bei Mobilitätseinschränkungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026348
Ph.D. Thesis, Primary publication, Publisher's Version
Ishibashi, Hikaru ; Ota, Koki ; Stephan, Peter ; Okajima, Junnosuke (2023)
Numerical simulation of bubble shape and heat transfer during nucleate pool boiling of FC-72.
Twentieth International Conference on Flow Dynamics. Sendai, Miyagi, Japan (06.11.2023-08.11.2023)
doi: 10.26083/tuprints-00026439
Conference or Workshop Item, Primary publication, Publisher's Version
Kohne, Thomas (2023)
Optimierungsmethodik zur Investitions- und Einsatzplanung der Fernwärmeanbindung industrieller Energiesysteme.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026436
Ph.D. Thesis, Primary publication, Publisher's Version
Schulte, Fiona (2023)
Ein Beitrag zur Vordimensionierung der Steifigkeitseigenschaften metallischer Bauteile durch die systematische Integration additiv gefertigter Meso-Strukturen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026386
Ph.D. Thesis, Primary publication, Publisher's Version
Huyeng, Tim-Jonathan (2023)
Mobil-autarkes Monitoringsystem auf Basis von IoT und Open Data am Beispiel Hochwasser.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024455
Ph.D. Thesis, Primary publication, Publisher's Version
Lorenzen, Steven Robert (2023)
Railway Bridge Monitoring with Minimal Sensor Deployment: Virtual Sensing and Resonance Curve-Based Drive-by Monitoring.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026426
Ph.D. Thesis, Primary publication, Publisher's Version
Reitter, Louis Maximilian (2023)
Ice Particle Impact Onto Dry, Wet and Granular Substrates.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024752
Ph.D. Thesis, Primary publication, Publisher's Version
Mohammadi Farshkhooni, Mahdad (2023)
Optische Eigenschaften in hochleitfähigen Perowskiten.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026411
Ph.D. Thesis, Primary publication, Publisher's Version
Hock, Martin ; Mayr, Hannes ; Richter, Manuela ; Lemmer, Jan ; Pelz, Peter F. (2023)
plotID - a toolkit for connecting research data and visualization.
In: ing.grid : FAIR data management in engineering sciences, 2023, 1 (1)
doi: 10.26083/tuprints-00026400
Article, Secondary publication, Publisher's Version
Marx, Falko ; Dieringer, Paul ; Ströhle, Jochen ; Epple, Bernd (2023)
Solid Flux Measurement in Chemical Looping Gasification Based on Solid Samples.
Fluidized Bed Conversion Conference 2022. Gothenburg, Schweden (08.05.2022-11.05.2022)
doi: 10.26083/tuprints-00026395
Conference or Workshop Item, Primary publication, Postprint
Becker-Dombrowsky, Florian Michael ; Hausmann, Maximilian ; Welzbacher, Peter ; Harder, André ; Kirchner, Eckhard (2023)
Systematic identification of disturbance factors on electric characteristics of mechanical gearboxes.
In: Forschung im Ingenieurwesen, 2023, 87 (1)
doi: 10.26083/tuprints-00026407
Article, Secondary publication, Publisher's Version
Harder, André ; Gross, Hans Joachim ; Vorwerk-Handing, Gunnar ; Kirchner, Eckhard (2023)
Using effect catalogues for the design of sensing machine elements – Method and exemplary application.
In: Proceedings of the Design Society, 2021, 1
doi: 10.26083/tuprints-00026408
Article, Secondary publication, Publisher's Version
Duarte Campos, Daniela F. ; Lindsay, Christopher D. ; Roth, Julien G. ; LeSavage, Bauer L. ; Seymour, Alexis J. ; Krajina, Brad A. ; Ribeiro, Ricardo ; Costa, Pedro F. ; Blaeser, Andreas ; Heilshorn, Sarah C. (2023)
Bioprinting Cell- and Spheroid-Laden Protein-Engineered Hydrogels as Tissue-on-Chip Platforms.
In: Frontiers in Bioengineering and Biotechnology, 2020, 8
doi: 10.26083/tuprints-00016294
Article, Secondary publication, Publisher's Version
Lohrey, Tobias (2023)
Modellgestützter Ansatz zur Effektivitätsprognose von Stauraumspülungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024383
Ph.D. Thesis, Primary publication, Publisher's Version
Brilz, Michael (2023)
Zur Bruchmechanik der wasserstoffassistierten Rissbildung in hochfesten Stählen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026350
Ph.D. Thesis, Primary publication, Publisher's Version
Geschwindner, Christopher ; Kranz, Patrick ; Welch, Cooper ; Schmidt, Marius ; Böhm, Benjamin ; Kaiser, Sebastian A. ; Morena, Joaquin De la (2023)
Analysis of the interaction of Spray G and in-cylinder flow in two optical engines for late gasoline direct injection.
In: International Journal of Engine Research, 2020, 21 (1)
doi: 10.26083/tuprints-00016620
Article, Secondary publication, Publisher's Version
Ding, Carl-Philipp ; Vuilleumier, David ; Kim, Namho ; Reuss, David L. ; Sjöberg, Magnus ; Böhm, Benjamin (2023)
Effect of engine conditions and injection timing on piston-top fuel films for stratified direct-injection spark-ignition operation using E30.
In: International Journal of Engine Research, 2020, 21 (2)
doi: 10.26083/tuprints-00016623
Article, Secondary publication, Publisher's Version
Halblaub Miranda, Marianne (2023)
Intermodal Open Spaces. An analysis of inner-city mobility stations in the Rhine-Main region.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023313
Ph.D. Thesis, Primary publication, Publisher's Version
Stefanitsis, Dionisis ; Nesiadis, Athanasios ; Koutita, Konstantina ; Nikolopoulos, Aristeidis ; Nikolopoulos, Nikolaos ; Peters, Jens ; Ströhle, Jochen ; Epple, Bernd (2023)
Simulation of a CFB Boiler Integrated With a Thermal Energy Storage System During Transient Operation.
In: Frontiers in Energy Research, 2020, 8
doi: 10.26083/tuprints-00017038
Article, Secondary publication, Publisher's Version
Sontheimer, Henrik ; Elsäßer, Leon ; Stephan, Peter ; Gambaryan-Roisman, Tatiana (2023)
Simultaneous and Non-Simultaneous Drop Impact onto a Wall.
Twentieth International Conference on Flow Dynamics. Sendai, Miyagi, Japan (06.11.2023-08.11.2023)
doi: 10.26083/tuprints-00026393
Conference or Workshop Item, Primary publication, Publisher's Version
Friesen, John ; Friesen, Victoria ; Dietrich, Ingo ; Pelz, Peter F. (2023)
Slums, Space, and State of Health — A Link between Settlement Morphology and Health Data.
In: International Journal of Environmental Research and Public Health, 2020, 17 (6)
doi: 10.26083/tuprints-00016152
Article, Secondary publication, Publisher's Version
Li, Dongyue ; Marchisio, Daniele ; Hasse, Christian ; Lucas, Dirk (2023)
Comparison of Eulerian QBMM and classical Eulerian–Eulerian method for the simulation of polydisperse bubbly flows.
In: AIChE Journal, 2019, 65 (11)
doi: 10.26083/tuprints-00016157
Article, Secondary publication, Publisher's Version
Wacławczyk, Marta ; Grebenev, Vladimir N. ; Oberlack, Martin (2023)
Conformal Invariance of Characteristic Lines in a Class of Hydrodynamic Models.
In: Symmetry, 2020, 12 (9)
doi: 10.26083/tuprints-00015966
Article, Secondary publication, Publisher's Version
Abendroth, Bettina ; Landau, Kurt (2023)
Wie verändert sich der Autofahrer im Alter?
48. Arbeitswissenschaftlicher Kongress. Linz (20.02.2002-22.02.2002)
doi: 10.26083/tuprints-00024595
Conference or Workshop Item, Secondary publication, Postprint
Abendroth, Bettina ; Schreiber, Michael ; Maul, Daniel ; Maul, Stefan ; Bruder, Ralph (2023)
Übertragbarkeit des Längsführungsverhaltens von Simulatorstudien auf Realfahrten - Was macht der Fahrer im Simulator anders als im Feld?
Mensch, Technik, Organisation - Vernetzung im Produktentstehungs- und herstellungsprozess, 57. Kongress der Gesellschaft für Arbeitswissenschaft. Chemnitz (23.03.2011-25.03.2011)
doi: 10.26083/tuprints-00024583
Conference or Workshop Item, Secondary publication, Publisher's Version
Heep, Thomas ; Bickert, Christian ; Abele, Eberhard (2023)
Application of Carbon Dioxide Snow in Machining of CGI using an Additively Manufactured Turning Tool.
In: Journal of Manufacturing and Materials Processing, 2019, 3 (1)
doi: 10.26083/tuprints-00015945
Article, Secondary publication, Publisher's Version
Merklein, Lisa ; Daume, Dominik ; Braig, Felix ; Schlisske, Stefan ; Rödlmeier, Tobias ; Mink, Marvin ; Kourkoulos, Dimitrios ; Ulber, Benjamin ; Di Biase, Manuela ; Meerholz, Klaus ; Hernandez-Sosa, Gerardo ; Lemmer, Uli ; Sauer, Hans Martin ; Dörsam, Edgar ; Scharfer, Philip ; Schabel, Wilhelm (2023)
Comparative Study of Printed Multilayer OLED Fabrication through Slot Die Coating, Gravure and Inkjet Printing, and Their Combination.
In: Colloids and Interfaces, 2019, 3 (1)
doi: 10.26083/tuprints-00015690
Article, Secondary publication, Publisher's Version
Roy, Tamal ; Szuttor, Kai ; Smiatek, Jens ; Holm, Christian ; Hardt, Steffen (2023)
Conformation and Dynamics of Long-Chain End-Tethered Polymers in Microchannels.
In: Polymers, 2019, 11 (3)
doi: 10.26083/tuprints-00015814
Article, Secondary publication, Publisher's Version
Kohne, Thomas ; Beck, Martin ; Bishara, Nadja ; Seyfried, Stefan ; Schneider, Jens ; Weigold, Matthias
eds.: Weigold, Matthias ; Kohne, Thomas ; Seyfried, Stefan ; Beck, Martin ; Bishara, Nadja ; Technische Universtität Darmstadt (2023)
The Darmstadt Energy Laboratory for Technologies in Application: Overview Paper – Living Lab DELTA.
doi: 10.26083/tuprints-00026384
Report, Primary publication, Publisher's Version
Kohne, Thomas ; Beck, Martin ; Bishara, Nadja ; Seyfried, Stefan ; Schneider, Jens ; Weigold, Matthias
eds.: Weigold, Matthias ; Kohne, Thomas ; Seyfried, Stefan ; Beck, Martin ; Bishara, Nadja ; Technische Universität Darmstadt (2023)
Das Darmstädter Energie-Labor für Technologien in der Anwendung: Übersichtspapier - Reallabor DELTA.
doi: 10.26083/tuprints-00026379
Report, Primary publication, Publisher's Version
Sacomano Filho, Fernando Luiz ; Dressler, Louis ; Hosseinzadeh, Arash ; Sadiki, Amsini ; Krieger Filho, Guenther Carlos (2023)
Investigations of Evaporative Cooling and Turbulence Flame Interaction Modeling in Ethanol Turbulent Spray Combustion Using Tabulated Chemistry.
In: Fluids, 2019, 4 (4)
doi: 10.26083/tuprints-00015742
Article, Secondary publication, Publisher's Version
Brumm, Pauline ; Sauer, Hans Martin ; Dörsam, Edgar (2023)
Scaling Behavior of Pattern Formation in the Flexographic Ink Splitting Process.
In: Colloids and Interfaces, 2019, 3 (1)
doi: 10.26083/tuprints-00015820
Article, Secondary publication, Publisher's Version
Kumar, Abhijeet ; Kleinen, Jochen ; Venzmer, Joachim ; Trybala, Anna ; Starov, Victor ; Gambaryan-Roisman, Tatiana (2023)
Spreading and Imbibition of Vesicle Dispersion Droplets on Porous Substrates.
In: Colloids and Interfaces, 2019, 3 (3)
doi: 10.26083/tuprints-00015683
Article, Secondary publication, Publisher's Version
Beckerle, Philipp ; Stuhlenmiller, Florian ; Rinderknecht, Stephan (2023)
Stiffness Control of Variable Serial Elastic Actuators: Energy Efficiency through Exploitation of Natural Dynamics.
In: Actuators, 2017, 6 (4)
doi: 10.26083/tuprints-00015622
Article, Secondary publication, Publisher's Version
Dreher, Daniel ; Schmidt, Marius ; Welch, Cooper ; Ourza, Sara ; Zündorf, Samuel ; Maucher, Johannes ; Peters, Steven ; Dreizler, Andreas ; Böhm, Benjamin ; Hanuschkin, Alexander (2023)
Deep feature learning of in-cylinder flow fields to analyze cycle-to-cycle variations in an SI engine.
In: International Journal of Engine Research, 2021, 22 (11)
doi: 10.26083/tuprints-00020179
Article, Secondary publication, Publisher's Version
Kautzmann, Luisa Katharina (2023)
Digitale Transformation von Übungen im Katastrophenschutz – Ein Planungssystem für kompetenzorientierte Stabsübungen.
doi: 10.26083/tuprints-00024515
Book, Secondary publication, Publisher's Version
Schneider, Patrick ; Kienzler, Reinhold (2023)
Dimensioning of thick-walled spherical and cylindrical pressure vessels.
In: Mathematics and Mechanics of Solids, 2020, 25 (7)
doi: 10.26083/tuprints-00016989
Article, Secondary publication, Publisher's Version
Sattler, Bernhard Jonathan ; Friesen, John ; Tundis, Andrea ; Pelz, Peter F. (2023)
Modeling and Validation of Residential Water Demand in Agent-Based Models: A Systematic Literature Review.
In: Water, 2023, 15 (3)
doi: 10.26083/tuprints-00023352
Article, Secondary publication, Publisher's Version
Fach, Christian ; Rödel, Nico ; Schorr, Jürgen ; Krüger, Christian ; Dreizler, Andreas ; Böhm, Benjamin (2023)
Multi-parameter imaging of in-cylinder processes during transient engine operation for the investigation of soot formation.
In: International Journal of Engine Research, 2022, 23 (9)
doi: 10.26083/tuprints-00022025
Article, Secondary publication, Publisher's Version
Hatada, Ruriko ; Flege, Stefan ; Ensinger, Wolfgang ; Hesse, Sabine ; Tanabe, Shuji ; Nishimura, Yasuhisa ; Baba, Koumei (2023)
Preparation of Aniline-Based Nitrogen-Containing Diamond-Like Carbon Films with Low Electrical Resistivity.
In: Coatings, 2020, 10 (1)
doi: 10.26083/tuprints-00016108
Article, Secondary publication, Publisher's Version
Ratz, Johannes ; Leichtfuß, Sebastian ; Beck, Maximilian ; Schiffer, Heinz-Peter ; Fröhlig, Friedrich (2023)
Surge Margin Optimization of Centrifugal Compressors Using a New Objective Function Based on Local Flow Parameters.
In: International Journal of Turbomachinery, Propulsion and Power, 2019, 4 (4)
doi: 10.26083/tuprints-00016113
Article, Secondary publication, Publisher's Version
Bremm, Sophia ; Rosendahl, Philipp L. ; Becker, Wilfried (2023)
Application of a reduced basis method for an efficient treatment of structural mechanics problems.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2021, 20 (1)
doi: 10.26083/tuprints-00017825
Article, Secondary publication, Publisher's Version
Schreiber, Philip ; Mittelstedt, Christian (2023)
Closed‐form buckling analysis of unsymmetrically laminated plates.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023687
Article, Secondary publication, Publisher's Version
Sajadifar, Seyed Vahid ; Suckow, Timon ; Heider, Ben ; Oechsner, Matthias ; Groche, Peter ; Niendorf, Thomas (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version
Müller, Henning ; Schlüter, Alexander ; Müller, Ralf (2023)
Dynamic Crack Propagation in a Lattice Boltzmann Method for Solid Mechanics.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023691
Article, Secondary publication, Publisher's Version
Werschnik, Holger ; Schneider, Marius ; Herrmann, Janina ; Ivanov, Dimitri ; Schiffer, Heinz-Peter ; Lyko, Christoph (2023)
The Influence of Combustor Swirl on Pressure Losses and the Propagation of Coolant Flows at the Large Scale Turbine Rig (LSTR): Experimental and Numerical Investigation.
In: International Journal of Turbomachinery, Propulsion and Power, 2017, 2 (3)
doi: 10.26083/tuprints-00015426
Article, Secondary publication, Publisher's Version
Lin, Binbin ; Medghalchi, Setareh ; Korte-Kerzel, Sandra ; Xu, Bai-Xiang (2023)
A Machine Learning Enabled Image‐data‐driven End‐to‐end Mechanical Field Predictor For Dual‐Phase Steel.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023695
Article, Secondary publication, Publisher's Version
Günzel, Janosch (2023)
Mehrstufige Umformung hochfester Aluminiumlegierungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026361
Ph.D. Thesis, Primary publication, Publisher's Version
Melzi d'Eril, Marco ; Graczyk‐Zajac, Magdalena Joanna ; Riedel, Ralf (2023)
On the Reversible Sodium Plating/stripping Reaction in Porous SiCN(O) Ceramic: A Feasibility Study.
In: Batteries & Supercaps, 2023, 6 (3)
doi: 10.26083/tuprints-00023713
Article, Secondary publication, Publisher's Version
Schneider, Marius ; Schiffer, Heinz-Peter ; Lehmann, Knut (2023)
Parameterised Model of 2D Combustor Exit Flow Conditions for High-Pressure Turbine Simulations.
In: International Journal of Turbomachinery, Propulsion and Power, 2017, 2 (4)
doi: 10.26083/tuprints-00015434
Article, Secondary publication, Publisher's Version
Schilling, Jakob C. ; Mittelstedt, Christian (2023)
Approximate computational model for the local postbuckling of omega‐stringer‐stiffened composite panels.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023730
Article, Secondary publication, Publisher's Version
Sun, W. ; Meng, X. ; Wang, Y. ; Hsiau, S. S. ; You, Z. (2023)
A Depth‐Averaged Description of Submarine Avalanche Flows and Induced Surface Waves.
In: Journal of Geophysical Research: Earth Surface, 2023, 128 (4)
doi: 10.26083/tuprints-00023726
Article, Secondary publication, Publisher's Version
Preuß, Oliver ; Bruder, Enrico ; Lu, Wenjun ; Zhuo, Fangping ; Minnert, Christian ; Zhang, Jiawen ; Rödel, Jürgen ; Fang, Xufei (2023)
Dislocation toughening in single‐crystal KNbO₃.
In: Journal of the American Ceramic Society, 2023, 106 (7)
doi: 10.26083/tuprints-00024324
Article, Secondary publication, Publisher's Version
Schneider, Christian ; Schmidt, Christoph P. ; Neumann, Anton ; Clausnitzer, Moritz ; Sadowski, Marcel ; Harm, Sascha ; Meier, Christoph ; Danner, Timo ; Albe, Karsten ; Latz, Arnulf ; Wall, Wolfgang A. ; Lotsch, Bettina V. (2023)
Effect of Particle Size and Pressure on the Transport Properties of the Fast Ion Conductor t‐Li₇SiPS₈.
In: Advanced Energy Materials, 2023, 13 (15)
doi: 10.26083/tuprints-00024316
Article, Secondary publication, Publisher's Version
Fang, Xufei ; Preuß, Oliver ; Breckner, Patrick ; Zhang, Jiawen ; Lu, Wenjun (2023)
Engineering dislocation‐rich plastic zones in ceramics via room‐temperature scratching.
In: Journal of the American Ceramic Society, 2023, 106 (8)
doi: 10.26083/tuprints-00024320
Article, Secondary publication, Publisher's Version
Lan, Shuang ; Zheng, Mupeng ; Zhuo, Fangping ; Zhu, Mankang ; Hou, Yudong (2023)
Enhanced Piezo-Photocatalytic Performance of Na₀.₅Bi₄.₅Ti₄O₁₅ by High-Voltage Poling.
In: Materials, 2023, 16 (14)
doi: 10.26083/tuprints-00024408
Article, Secondary publication, Publisher's Version
Bienefeld, Christoph ; Becker-Dombrowsky, Florian Michael ; Shatri, Etnik ; Kirchner, Eckhard (2023)
Investigation of Feature Engineering Methods for Domain-Knowledge-Assisted Bearing Fault Diagnosis.
In: Entropy, 2023, 25 (9)
doi: 10.26083/tuprints-00024494
Article, Secondary publication, Publisher's Version
Wilbrink, Marc ; Cieler, Stephan ; Weiß, Sebastian L. ; Beggiato, Matthias ; Joisten, Philip ; Feierle, Alexander ; Oehl, Michael (2023)
Principles for External Human-Machine Interfaces.
In: Information, 2023, 14 (8)
doi: 10.26083/tuprints-00024501
Article, Secondary publication, Publisher's Version
Gajevic Joksimovic, Marija ; Hussong, Jeanette ; Tropea, Cameron ; Roisman, Ilia V. (2023)
Spray impact onto a hot solid substrate: Film boiling suppression by lubricant addition.
In: Frontiers in Physics, 2023, 11
doi: 10.26083/tuprints-00023770
Article, Secondary publication, Publisher's Version
Mehrnia, Seyedmajid ; Pelz, Peter F. (2023)
Tribological Design by Molecular Dynamics Simulation: Influence of the Molecular Structure on Wall Slip and Bulk Shear.
In: Chemical Engineering & Technology, 2023, 46 (1)
doi: 10.26083/tuprints-00023722
Article, Secondary publication, Publisher's Version
Freudigmann, H-A. ; Iben, U. ; Pelz, P. F. (2023)
Air release measurements of V-oil 1404 downstream of a micro orifice at choked flow conditions.
In: Journal of Physics: Conference Series, 2015, 656 (1)
doi: 10.26083/tuprints-00020861
Article, Secondary publication, Publisher's Version
Fuchs, Klaus ; Abendroth, Bettina ; Bruder, Ralph (2023)
Aktive Gefahrenbremsungen – Wie reagiert der Fahrer?
24. VDI/VW-Gemeinschaftstagung - Integrierte Sicherheit und Fahrerassistenzsysteme. Wolfsburg (29.10.2008-30.10.2008)
doi: 10.26083/tuprints-00024613
Conference or Workshop Item, Secondary publication, Postprint
Ries, Florian ; Li, Yongxiang ; Rißmann, Martin ; Klingenberg, Dario ; Nishad, Kaushal ; Böhm, Benjamin ; Dreizler, Andreas ; Janicka, Johannes ; Sadiki, Amsini (2023)
Database of Near-Wall Turbulent Flow Properties of a Jet Impinging on a Solid Surface under Different Inclination Angles.
In: Fluids, 2018, 3 (1)
doi: 10.26083/tuprints-00016349
Article, Secondary publication, Publisher's Version
Moeini, Ghazal ; Sajadifar, Seyed Vahid ; Engler, Tom ; Heider, Ben ; Niendorf, Thomas ; Oechsner, Matthias ; Böhm, Stefan (2023)
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components.
In: Metals, 2020, 10 (1)
doi: 10.26083/tuprints-00016122
Article, Secondary publication, Publisher's Version
Logan, Kevin ; Silva Pimenta, Izadora ; Leštáková, Michaela ; Pelz, Peter F. (2023)
A FAIR Future for Engineering Sciences - Linking an RDM Community through a Scientific Journal.
1st Conference on Research Data Infrastructure (CoRDI). Karlsruhe, Germany (12.09.2023-14.09.2023)
doi: 10.26083/tuprints-00026332
Conference or Workshop Item, Secondary publication, Publisher's Version
Rosenburg, Felix ; Ionescu, Emanuel ; Nicoloso, Norbert ; Riedel, Ralf (2023)
High-Temperature Raman Spectroscopy of Nano-Crystalline Carbon in Silicon Oxycarbide.
In: Materials, 2018, 11 (1)
doi: 10.26083/tuprints-00016368
Article, Secondary publication, Publisher's Version
Recklin, Viktor ; Dietrich, Felix ; Groche, Peter (2023)
In-situ-measurement of the friction coefficient in the deep drawing process.
In: Journal of Physics: Conference Series, 2017, 896 (1)
doi: 10.26083/tuprints-00020933
Article, Secondary publication, Publisher's Version
Löwe, Jens ; Kintea, Daniel ; Baumert, Arne ; Bansmer, Stephan ; Roisman, Ilia V. ; Tropea, Cameron (2023)
Inception of ice accretion by ice crystal impact.
In: Journal of Physics: Conference Series, 2016, 745 (3)
doi: 10.26083/tuprints-00020874
Article, Secondary publication, Publisher's Version
Hatada, Ruriko ; Flege, Stefan ; Ashraf, Muhammad Naeem ; Timmermann, Arne ; Schmid, Christoph ; Ensinger, Wolfgang (2023)
The Influence of Preparation Conditions on the Structural Properties and Hardness of Diamond-Like Carbon Films, Prepared by Plasma Source Ion Implantation.
In: Coatings, 2020, 10 (4)
doi: 10.26083/tuprints-00016151
Article, Secondary publication, Publisher's Version
Meyer, Guillaume ; Brenne, Florian ; Niendorf, Thomas ; Mittelstedt, Christian (2023)
Influence of the Miniaturisation Effect on the Effective Stiffness of Lattice Structures in Additive Manufacturing.
In: Metals, 2020, 10 (11)
doi: 10.26083/tuprints-00016184
Article, Secondary publication, Publisher's Version
Schardt, Sven ; Weidler, Natascha ; Wallace, W. David Z. ; Martinaiou, Ioanna ; Stark, Robert W. ; Kramm, Ulrike I. (2023)
Influence of the Structure-Forming Agent on the Performance of Fe-N-C Catalysts.
In: Catalysts, 2018, 8 (7)
doi: 10.26083/tuprints-00016437
Article, Secondary publication, Publisher's Version
Kraft, Markus ; Rinderknecht, Stephan (2023)
A Method for the Quantification of Powertrain Electrification Impacts on Driving Dynamics.
In: World Electric Vehicle Journal, 2018, 9 (2)
doi: 10.26083/tuprints-00016424
Article, Secondary publication, Publisher's Version
Wacławczyk, Tomasz ; Wacławczyk, Marta ; Kraheberger, Stefanie V. (2023)
Modelling of turbulence-interface interactions in stratified two-phase flows.
In: Journal of Physics: Conference Series, 2014, 530 (1)
doi: 10.26083/tuprints-00020827
Article, Secondary publication, Publisher's Version
Plappert, Christian ; Zelle, Daniel ; Krauß, Christoph ; Lange, Benjamin ; Mauthofer, Sebastian ; Walter, Jonas ; Abendroth, Bettina ; Robrahn, Rasmus ; Pape, Thilo von ; Decke, Hendrik (2023)
A Privacy-aware Data Access System for Automotive Applications.
15th ESCAR Embedded Security in Cars Conference. Berlin (07.11.2017-08.11.2017)
doi: 10.26083/tuprints-00024602
Conference or Workshop Item, Secondary publication, Publisher's Version
Silva Pimenta, Izadora ; Logan, Kevin ; Leštáková, Michaela ; Pelz, Peter F. (2023)
Research outcomes and scholarly publishing: FAIR principles as quality assessment.
Data Stewardship goes Germany (DSgG). Dresden, Germany (25.09.2023-26.09.2023)
doi: 10.26083/tuprints-00026331
Conference or Workshop Item, Secondary publication, Publisher's Version
Perfetto, Sara ; Rohlfing, Jens ; Infante, F. ; Mayer, D. ; Herold, Sven (2023)
Test rig with active damping control for the simultaneous evaluation of vibration control and energy harvesting via piezoelectric transducers.
In: Journal of Physics: Conference Series, 2016, 744 (1)
doi: 10.26083/tuprints-00020871
Article, Secondary publication, Publisher's Version
Zöller, Ilka ; Yang, Nan ; Abendroth, Bettina ; Bruder, Ralph (2023)
Zur Validität des Blickbewegungsverhaltens unter Nachtsichtverhältnissen in einer Fahrsimulatorstudie.
60. Kongress der Gesellschaft für Arbeitswissenschaft, Gestaltung der Arbeitswelt der Zukunft. München (12.03.2014-14.03.2014)
doi: 10.26083/tuprints-00024616
Conference or Workshop Item, Secondary publication, Postprint
Söhling, Nicolas ; Neijhoft, Jonas ; Nienhaus, Vinzenz ; Acker, Valentin ; Harbig, Jana ; Menz, Fabian ; Ochs, Joachim ; Verboket, René D. ; Ritz, Ulrike ; Blaeser, Andreas ; Dörsam, Edgar ; Frank, Johannes ; Marzi, Ingo ; Henrich, Dirk (2023)
3D-Printing of Hierarchically Designed and Osteoconductive Bone Tissue Engineering Scaffolds.
In: Materials, 2020, 13 (8)
doi: 10.26083/tuprints-00016618
Article, Secondary publication, Publisher's Version
Jaeger, Jeannine ; Groher, Florian ; Stamm, Jacqueline ; Spiehl, Dieter ; Braun, Johannes ; Dörsam, Edgar ; Suess, Beatrix (2023)
Characterization and Inkjet Printing of an RNA Aptamer for Paper-Based Biosensing of Ciprofloxacin.
In: Biosensors, 2019, 9 (1)
doi: 10.26083/tuprints-00016878
Article, Secondary publication, Publisher's Version
Friesen, John ; Rausch, Lea ; Pelz, Peter F. ; Fürnkranz, Johannes (2023)
Determining Factors for Slum Growth with Predictive Data Mining Methods.
In: Urban Science, 2018, 2 (3)
doi: 10.26083/tuprints-00016703
Article, Secondary publication, Publisher's Version
Treffeisen, Torben ; Henk, Andreas (2023)
Faults as Volumetric Weak Zones in Reservoir-Scale Hydro-Mechanical Finite Element Models — A Comparison Based on Grid Geometry, Mesh Resolution and Fault Dip.
In: Energies, 2020, 13 (10)
doi: 10.26083/tuprints-00016987
Article, Secondary publication, Publisher's Version
Bermúdez Agudelo, María Catalina ; Hampe, Manfred ; Reiber, Thorsten ; Abele, Eberhard (2023)
Investigation of Porous Metal-Based 3D-Printed Anode GDLs for Tubular High Temperature Proton Exchange Membrane Fuel Cells.
In: Materials, 2020, 13 (9)
doi: 10.26083/tuprints-00016630
Article, Secondary publication, Publisher's Version
Blinn, Bastian ; Klein, Marcus ; Gläßner, Christopher ; Smaga, Marek ; Aurich, Jan ; Beck, Tilmann (2023)
An Investigation of the Microstructure and Fatigue Behavior of Additively Manufactured AISI 316L Stainless Steel with Regard to the Influence of Heat Treatment.
In: Metals, 2018, 8 (4)
doi: 10.26083/tuprints-00017114
Article, Secondary publication, Publisher's Version
Heinrich, Arne ; Kuenne, Guido ; Ganter, Sebastian ; Hasse, Christian ; Janicka, Johannes (2023)
Investigation of the Turbulent Near Wall Flame Behavior for a Sidewall Quenching Burner by Means of a Large Eddy Simulation and Tabulated Chemistry.
In: Fluids, 2018, 3 (3)
doi: 10.26083/tuprints-00016710
Article, Secondary publication, Publisher's Version
Wang, Yongqi ; Hutter, Kolumban (2023)
Phenomenological Thermodynamics of Irreversible Processes.
In: Entropy, 2018, 20 (6)
doi: 10.26083/tuprints-00016805
Article, Secondary publication, Publisher's Version
Shamooni, Ali ; Cuoci, Alberto ; Faravelli, Tiziano ; Sadiki, Amsini (2023)
Prediction of Combustion and Heat Release Rates in Non-Premixed Syngas Jet Flames Using Finite-Rate Scale Similarity Based Combustion Models.
In: Energies, 2018, 11 (9)
doi: 10.26083/tuprints-00016712
Article, Secondary publication, Publisher's Version
Glücker, Philipp ; Kivekäs, Klaus ; Vepsäläinen, Jari ; Mouratidis, Panagiotis ; Schneider, Maximilian ; Rinderknecht, Stephan ; Tammi, Kari (2023)
Prolongation of Battery Lifetime for Electric Buses through Flywheel Integration.
In: Energies, 2021, 14 (4)
doi: 10.26083/tuprints-00017803
Article, Secondary publication, Publisher's Version
Knobloch, Robert (2023)
Konzept zur Modularisierung von Komponenten des Digitalen Prozesszwillings.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023382
Bachelor Thesis, Primary publication, Publisher's Version
Klein, Jonas (2023)
Schnittgrößenverteilung in statisch unbestimmten Betonbauteilen mit nichtmetallischer Bewehrung - Untersuchungen zur Zuverlässigkeit von Durchlaufsystemen großer Biegeschlankheit im Grenzzustand der Tragfähigkeit.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024569
Ph.D. Thesis, Primary publication, Publisher's Version
Haspel, Philip Michael (2023)
Comparison of turbulent reactive spray characteristics of different renewable fuels using Large Eddy Simulation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024726
Ph.D. Thesis, Primary publication, Publisher's Version
Eicke, Julia ; Friedrich, Pascal ; Dammel, Frank ; Stephan, Peter (2023)
Development of a framework for the simulation and evaluation of flexible district heating systems.
17th International Symposium on District Heating and Cooling. Nottingham Trent University, Nottingham UK (06.09.2021-09.09.2021)
doi: 10.26083/tuprints-00024779
Conference or Workshop Item, Primary publication, Publisher's Version
Wang, Chun ; Ye, Guanlin ; Meng, Xiannan ; Wang, Yongqi ; Peng, Chong (2023)
A Eulerian−Lagrangian Coupled Method for the Simulation of Submerged Granular Column Collapse.
In: Journal of Marine Science and Engineering, 2021, 9 (6)
doi: 10.26083/tuprints-00019568
Article, Secondary publication, Publisher's Version
Foret, Jonas ; Franke, Daniel ; Klausmann, Fabian ; Schneider, Alexandra ; Schiffer, Heinz-Peter ; Becker, Bernd ; Müller, Hauke (2023)
Experimental Aerodynamic and Aeroelastic Investigation of a Highly-Loaded 1.5-Stage Transonic Compressor with Tandem Stator.
In: International Journal of Turbomachinery, Propulsion and Power, 2021, 6 (3)
doi: 10.26083/tuprints-00019612
Article, Secondary publication, Publisher's Version
Franke, Daniel ; Möller, Daniel ; Jüngst, Maximilian ; Schiffer, Heinz-Peter ; Giersch, Thomas ; Becker, Bernd (2023)
Experimental Aerodynamic and Aeroelastic Investigation of a Transonic Compressor Rotor with Reduced Blade Count.
In: International Journal of Turbomachinery, Propulsion and Power, 2021, 6 (2)
doi: 10.26083/tuprints-00019582
Article, Secondary publication, Publisher's Version
Rehm, Imke-Sophie ; Friesen, John ; Pouls, Kevin ; Busch, Christoph ; Taubenböck, Hannes ; Pelz, Peter F. (2023)
A Method for Modeling Urban Water Infrastructures Combining Geo-Referenced Data.
In: Water, 2021, 13 (16)
doi: 10.26083/tuprints-00019608
Article, Secondary publication, Publisher's Version
Datta, Ranajay ; Yelash, Leonid ; Schmid, Friederike ; Kummer, Florian ; Oberlack, Martin ; Lukáčová-Medvid’ová, Mária ; Virnau, Peter (2023)
Shear-Thinning in Oligomer Melts - Molecular Origins and Applications.
In: Polymers, 2021, 13 (16)
doi: 10.26083/tuprints-00019574
Article, Secondary publication, Publisher's Version
Weber, Alexander (2023)
Semi-Physical Real-Time Models with State and Parameter Estimation for Diesel Engines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024758
Ph.D. Thesis, Primary publication, Publisher's Version
Izdebska-Podsiadły, Joanna ; Trokowska, Paula ; Dörsam, Edgar (2023)
Aging of Polylactide Films Exposed to Plasma — Hydrophobic Recovery and Selected Application Properties.
In: Applied Sciences, 2023, 13 (5)
doi: 10.26083/tuprints-00023342
Article, Secondary publication, Publisher's Version
Middendorf, Moritz ; Umbach, Cristin ; Böhm, Stefan ; Liu, Jia ; Middendorf, Bernhard (2023)
Comparative Study of 2D Petrographic and 3D X-ray Tomography Investigations of Air Voids in Asphalt.
In: Materials, 2023, 16 (3)
doi: 10.26083/tuprints-00023345
Article, Secondary publication, Publisher's Version
Hübsch, Jan David ; Demleitner, Martin ; Bard, Simon ; Berendes, Philipp ; Altstädt, Volker ; Mittelstedt, Christian (2023)
Influence of Skydrol immersion at elevated temperatures on the thermo‐mechanical properties of a high‐Tg anhydride epoxy resin toughened with a hydroxy‐terminated polyester.
In: Journal of Applied Polymer Science, 2023, 140 (1)
doi: 10.26083/tuprints-00023741
Article, Secondary publication, Publisher's Version
Fritschen, Anna ; Acedo Mestre, Mariana ; Scholpp, Sebastian ; Blaeser, Andreas (2023)
Influence of the physico-chemical bioink composition on the printability and cell biological properties in 3D-bioprinting of a liver tumor cell line.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00023358
Article, Secondary publication, Publisher's Version
Husung, Stephan ; Koch, Yanik ; Welzbacher, Peter ; Kraus, Benjamin ; Roehnert, Felix ; Faheem, Faizan ; Kirchner, Eckhard (2023)
Systemic Conception of the Data Acquisition of Digital Twin Solutions for Use Case-Oriented Development and Its Application to a Gearbox.
In: Systems, 2023, 11 (5)
doi: 10.26083/tuprints-00024093
Article, Secondary publication, Publisher's Version
Galetzka, Armin ; Loukrezis, Dimitrios ; Georg, Niklas ; De Gersem, Herbert ; Römer, Ulrich (2023)
An hp‐adaptive multi‐element stochastic collocation method for surrogate modeling with information re‐use.
In: International Journal for Numerical Methods in Engineering, 2023, 124 (12)
doi: 10.26083/tuprints-00024293
Article, Secondary publication, Publisher's Version
Bodner, Jonas ; Koksharov, Josefine ; Dammel, Frank ; Stephan, Peter (2023)
Analysis of low‐temperature pumped thermal energy storage systems based on a transcritical CO₂ charging process.
In: Energy Science & Engineering, 2023, 11 (9)
doi: 10.26083/tuprints-00024677
Article, Secondary publication, Publisher's Version
Suckow, Timon ; Bütev Öcal, Ezgi ; Groche, Peter (2023)
A Comparative Study on the Production of a Hat Profile by Roll Forming and Stamping.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024698
Article, Secondary publication, Publisher's Version
Sellner, Erik ; Xu, Yikai ; Groche, Peter (2023)
Extension of Process Limits in High‐Strength Aluminum Forming by Local Contact Heating.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024663
Article, Secondary publication, Publisher's Version
Kühn, Annalena ; Haugwitz, Christoph ; Hinrichs, Jan ; Kupnik, Mario ; Lange, Jörg (2023)
Investigating the impact of thermal stresses on blistering effects in sandwich panels.
In: ce/papers : Proceedings in civil engineering, 2023, 6 (3-4)
doi: 10.26083/tuprints-00024705
Article, Secondary publication, Publisher's Version
Braband, Jens ; Kinas, Marco ; Klotz, Christian ; Milius, Birgit ; Schäbe, Hendrik ; Unger, Simon ; Katzenbeisser, Stefan ; Schmid, Robert ; Polze, Andreas ; Ackermann, Eric ; Christl, Marion ; Gebauer, Sven ; Seitz, Maximilian ; Schindler, Bastian ; Vedder, Johannes ; Reiter, Frederic ; Iffländer, Lukas ; Maschek, Ulrich ; Kahl, Richard ; Lucas, Julian ; Rothkehl, Markus ; Wenzel, Benedikt ; Wenz, Andreas ; Nitzschke, Henning ; Drodt, Matthias ; Weber, Frank ; Smith, Gunnar ; Zinngrebe, Melvin ; Hofer, Simon ; Müller, Martin ; Reinhart, Peter
eds.: Oetting, Andreas ; Milius, Birgit (2023)
Scientific Railway Signalling Symposium 2023 - Einfach Fahren! – Digitale Transformation im Spannungsfeld Automatisierung, europäische Standardisierung und schneller Rollout.
Einfach Fahren! – Digitale Transformation im Spannungsfeld Automatisierung, europäische Standardisierung und schneller Rollout. Darmstadt (14.06.2023-14.06.2023)
doi: 10.26083/tuprints-00024713
Conference or Workshop Item, Primary publication, Publisher's Version
Schell, Lukas ; Sellner, Erik ; Massold, Michael ; Groche, Peter (2023)
Tribology in Warm and Hot Aluminum Sheet Forming: Transferability of Strip Drawing Tests to Forming Trials.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024667
Article, Secondary publication, Publisher's Version
Köster, Robin (2023)
Direct Drive Wind Generators with Superconducting Excitation in the Multi-MW Class.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024728
Ph.D. Thesis, Primary publication, Publisher's Version
Zhang, Shifan (2023)
Investigation and development of power-generating building material systems based on air-cathode microbial fuel cell using Geobacter sulfurreducens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024516
Ph.D. Thesis, Primary publication, Publisher's Version
Hungsberg, Maximilian (2023)
Toleranzbetrachtungen an einem Plasmavergasungsprozess zum chemischen Recycling gemischter Kunststoffabfälle.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024725
Ph.D. Thesis, Primary publication, Publisher's Version
Fritzsche, Max Johannes Alois ; Rupp, Maximilian Michael ; Lorenzen, Steven Robert ; Hofmann, Lucia ; Birmele, Lia ; Schneider, Jens (2023)
Inverse Identification of Cable Forces using its Modal Behavior by Direct and Non-Contact Vibration Measurements.
9th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Athen, Griechenland (12.06.2023-14.06.2023)
doi: 10.26083/tuprints-00024729
Conference or Workshop Item, Secondary publication, Publisher's Version
Weyand, Steffi (2023)
Methodology development for upscaling in prospective LCA: The case of perovskite solar cells as emerging functional material-based energy technology.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024546
Ph.D. Thesis, Primary publication, Publisher's Version
Franz, Benjamin ; Zöller, Ilka ; Schulz, Leander ; Abendroth, Bettina ; Bruder, Ralph (2023)
„Always on“ – Einfluss der Fahrsituation auf die Nutzung von Smartphones und Infotainmentsystemen in Fahrzeugen.
Gestaltung der Arbeitswelt der Zukunft - 60. Kongress der Gesellschaft für Arbeitswissenschaft. München (12.03.2014-14.03.2014)
doi: 10.26083/tuprints-00024590
Conference or Workshop Item, Secondary publication, Publisher's Version
Abendroth, Bettina ; Landau, Kurt (2023)
Auswirkungen eines Abstandsregelsystems auf Fahrerverhalten und Akzeptanz.
47. Kongress der Gesellschaft für Arbeitswissenschaft. Kassel (14.03.2001-16.03.2001)
doi: 10.26083/tuprints-00024594
Conference or Workshop Item, Secondary publication, Publisher's Version
Franz, Benjamin ; Zöller, Ilka ; Kauer, Michaela ; Schulz, Leander ; Abendroth, Bettina ; Bruder, Ralph (2023)
Being “Always On” in Vehicles – The use of Apps While Driving Bears Risks.
Proceedings of the 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014. Kraków, Poland (19.07.2014-23.07.2014)
doi: 10.26083/tuprints-00024589
Conference or Workshop Item, Secondary publication, Postprint
Abendroth, Bettina ; Eichert, Lukas ; Langer, Ingmar ; Bruder, Ralph (2023)
Beurteilung von Fahrerassistenzsystemen aus der Sicht älterer Fahrer.
Gestaltung der Arbeitswelt der Zukunft - 60. Kongress der Gesellschaft für Arbeitswissenschaft. München (12.03.2014-14.03.2014)
doi: 10.26083/tuprints-00024585
Conference or Workshop Item, Secondary publication, Publisher's Version
Kutscher, Vladimir (2023)
Die Virtuelle Klemmleiste – ein Ansatz zur Integration der Verhaltenslogik in den Digitalen Zwilling.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024707
Ph.D. Thesis, Primary publication, Publisher's Version
Abendroth, Bettina ; Landau, Kurt (2023)
Ergonomics of cockpits in cars.
In: International Encyclopedia of Ergonomics and Human Factors, 2006, Edition: 2
doi: 10.26083/tuprints-00024588
Book Section, Secondary publication, Postprint
Zademach, Martin ; Abendroth, Bettina (2023)
Ergonomische Auslegung einer Lichtleiste zur Kollisionsvermeidung.
In: Mensch & Computer 2013 - Workshopband, 2013
doi: 10.26083/tuprints-00024579
Book Section, Secondary publication, Postprint
Fuchs, Klaus ; Abendroth, Bettina ; Bruder, Ralph ; Leuchtenberg, Bettina (2023)
Ergonomische Bewertung eines Night Vision Systems mit Fußgängermarkierung im Head-up-Display.
Produkt- und Produktions-Ergonomie - Aufgabe für Entwickler und Planer : 54. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft. Garching (09.04.2008-11.04.2008)
doi: 10.26083/tuprints-00024600
Conference or Workshop Item, Secondary publication, Postprint
Abendroth, Bettina ; Williams, Mihaela
ed.: Landau, Kurt (2023)
Fahrerarbeitsplatz.
In: Lexikon Arbeitsgestaltung, 2007
doi: 10.26083/tuprints-00024612
Book Section, Secondary publication, Postprint
Landau, Kurt ; Nadeau, Sylvie ; Salmanzadeh, Hamed ; Abendroth, Bettina (2023)
„Große Arbeitsobjekte“ in Flugzeugbau und -wartung.
GfA-Herbstkonferenz 2021: Zeitbezug und Transformation - Ergonomie im Wandel des Fortschritts. Friedrichshafen (23.09.2021-24.09.2021)
doi: 10.26083/tuprints-00024608
Conference or Workshop Item, Secondary publication, Publisher's Version
Langer, Ingmar ; Heine, Jens ; Abendroth, Bettina ; Bruder, Ralph (2023)
Herausforderungen beim Hervorrufen von kritischen Brems- oder Lenkreaktionen in Fahrversuchen zur Untersuchung der Fahrerintention.
Gestaltung der Arbeitswelt der Zukunft - 60. Kongress der Gesellschaft für Arbeitswissenschaft. München (12.03.2014-14.03.2014)
doi: 10.26083/tuprints-00024609
Conference or Workshop Item, Secondary publication, Publisher's Version
Zöller, Ilka ; Bechmann, Roman ; Abendroth, Bettina (2023)
Possible applications for gestures while driving.
In: Automotive and Engine Technology, 2018, 3 (1-2)
doi: 10.26083/tuprints-00024591
Article, Secondary publication, Postprint
Abendroth, Bettina ; Bruder, Ralph (2023)
Sitzkomfort – welchen Einfluss hat das Untersuchungsszenario auf die Bewertung?
Neue Arbeits- und Lebenswelten gestalten : 56. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft. Darmstadt (24.03.2010-26.03.2010)
doi: 10.26083/tuprints-00024597
Conference or Workshop Item, Secondary publication, Postprint
Bay, Ole (2023)
Kalibrierung und Validierung eines Wasserhaushalts- und Wärmemodells zur Simulation von Fließgewässertemperaturen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024555
Master Thesis, Primary publication, Publisher's Version
Fecher, Norbert ; Hoffmann, Jens ; Winner, Hermann ; Fuchs, Klaus ; Abendroth, Bettina ; Bruder, Ralph (2023)
Aktive Gefahrenbremsungen - wie reagiert das Fahrer-Fahrzeug-System?
In: ATZ - Automobiltechnische Zeitschrift, 2009, 111 (2)
doi: 10.26083/tuprints-00024586
Article, Secondary publication, Postprint
Heine, Jens ; Sylla, Michael ; Schramm, Thomas ; Langer, Ingmar ; Abendroth, Bettina ; Bruder, Ralph (2023)
Algorithm for driver intention detection with Fuzzy Logic and Edit Distance.
18th International Conference on Intelligent Transportation Systems (ITSC 2015). Gran Canaria, Spain (15.09.2015-18.09.2015)
doi: 10.26083/tuprints-00024599
Conference or Workshop Item, Secondary publication, Postprint
Abendroth, Bettina ; Bruder, Ralph (2023)
Capabilities of Humans for Vehicle Guidance.
In: Handbook of Driver Assistance Systems, 2016
doi: 10.26083/tuprints-00024619
Book Section, Secondary publication, Postprint
Abendroth, Bettina ; Bruder, Ralph (2023)
Die Leistungsfähigkeit des Menschen für die Fahrzeugführung.
In: Handbuch Fahrerassistenzsysteme. Grundlagen, Komponenten und Systeme für aktive Sicherheit und Komfort, 2009
doi: 10.26083/tuprints-00024607
Book Section, Secondary publication, Postprint
Langer, Ingmar ; Abendroth, Bettina ; Bruder, Ralph (2023)
Driver Condition Detection.
In: Handbook of Driver Assistance Systems, 2015
doi: 10.26083/tuprints-00024587
Book Section, Secondary publication, Postprint
Gao, Yanlong ; Kaiser, Ralf ; Wagner, Peer-Oliver ; Abendroth, Bettina ; Paternoster, Susanne (2023)
Driving Posture Assessment: A New Approach.
21st Congress of the International Ergonomics Association (IEA 2021). online (13.06.2021-18.06.2021)
doi: 10.26083/tuprints-00024604
Conference or Workshop Item, Secondary publication, Postprint
Abendroth, Bettina ; Didier, Muriel ; Diaz-Zeledon, Marianela (2023)
Elderly females and vehicle cockpit design – a questionnaire analysis.
16th World Congress of the International Ergonomic Association (IEA). Maastricht, Netherlands (10.07.2006-14.07.2006)
doi: 10.26083/tuprints-00024584
Conference or Workshop Item, Secondary publication, Postprint
Langer, Ingmar ; Abendroth, Bettina ; Bruder, Ralph (2023)
Fahrerzustandserkennung.
In: Handbuch Fahrerassistenzsysteme, 2015
doi: 10.26083/tuprints-00024580
Book Section, Secondary publication, Postprint
Zöller, Ilka ; Mautes, Nicole ; Ren, Wen ; Abendroth, Bettina (2023)
Knowledge Base for Valid Driving Simulation.
In: ATZ Worldwide, 2015, 117 (3)
doi: 10.26083/tuprints-00024581
Article, Secondary publication, Postprint
Walter, Jonas ; Abendroth, Bettina (2023)
Losing a Private Sphere? A Glance on the User Perspective on Privacy in Connected Cars.
21st International Forum on Advanced Microsystems for Automotive Applications (AMAA 2017). Berlin (25.09.2017-26.09.2017)
doi: 10.26083/tuprints-00024614
Conference or Workshop Item, Secondary publication, Postprint
Abendroth, Bettina ; Schreiber, Michael ; Maul, Daniel ; Maul, Stefan ; Bruder, Ralph (2023)
Neue Ansätze zur Beurteilung der Fahrsimulatorvalidität.
In: Zeitschrift für Arbeitswissenschaft, 2012, 66 (1)
doi: 10.26083/tuprints-00024615
Article, Secondary publication, Postprint
Walter, Jonas ; Abendroth, Bettina (2023)
On the role of informational privacy in connected vehicles: A privacy-aware acceptance modelling approach for connected vehicular services.
In: Telematics and Informatics, 2020, 49
doi: 10.26083/tuprints-00024582
Article, Secondary publication, Postprint
Bruder, Ralph ; Abendroth, Bettina ; Didier, Muriel ; Schreiber, Michael ; Wilamowitz-Moellendorff, Margeritta von (2023)
Safe and Pleasurable Human Machine Interfaces for Automobile.
Convergence 2008. Detroit, USA (20.10.2008-22.10.2008)
doi: 10.26083/tuprints-00024610
Conference or Workshop Item, Secondary publication, Postprint
Köbschall, Kilian (2023)
Transport Processes in Snow and Ice Crystal Icing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024470
Ph.D. Thesis, Primary publication, Publisher's Version
Chadda, Romol (2023)
Force sensor manufactured with laser-based powder bed fusion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024620
Ph.D. Thesis, Primary publication, Publisher's Version
Schwarze, Simon Constantin (2023)
Machbarkeitsstudie zur Nutzung der Werra-Wärme am Nadelwehr Hann. Münden.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024623
Master Thesis, Primary publication, Publisher's Version
Hadelli, Ali Adel (2023)
Untersuchung der Fahrdynamik bei Einspurfahrzeugunfällen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024191
Master Thesis, Primary publication, Publisher's Version
Richter, Marcel ; Schneider, Henrik ; Özer, Burak ; Maßmeyer, Anna ; Ströhle, Jochen ; Epple, Bernd (2023)
Untersuchung der Flammenstabilität und thermischen Strahlung in einer 1-MWth-Brennkammer unter Oxyfuel-Bedingungen.
31. Deutscher Flammentag für nachhaltige Verbrennung. Berlin (27.09.2023-28.09.2023)
doi: 10.26083/tuprints-00024651
Conference or Workshop Item, Primary publication, Publisher's Version
David, Amrei Gesine (2023)
Modeling of Rain-Related Inundation Areas in Small Rural Catchments Using the Direct Rainfall Method.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024374
Ph.D. Thesis, Primary publication, Publisher's Version
Aquilanti, Alessia (2023)
Experimental Characterization and Numerical Modelling of Solar Cooker Prototypes with Thermal Energy Storage.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024334
Ph.D. Thesis, Primary publication, Publisher's Version
Bensing, Katharina (2023)
Ethohydraulische Modellierung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024347
Ph.D. Thesis, Primary publication, Publisher's Version
Silva Pimenta, Izadora ; Logan, Kevin ; Leštáková, Michaela ; Pelz, Peter F. ; Günther, Anne-Christine ; Kerekes, Matthias ; Kraußold, Sebastian (2023)
Open Peer Review for a Transparent and Engaging Scientific Environment: Towards a FAIR Journal.
The Lower Decks. A Symposium on Janeway and Open Access Publishing. London, United Kingdom (07.09.2023-08.09.2023)
doi: 10.26083/tuprints-00024577
Conference or Workshop Item, Primary publication, Publisher's Version
Zhu, Jiangchao (2023)
Structural Integrity Assessment of Metallic Components Based on Representative Specimens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024511
Ph.D. Thesis, Primary publication, Publisher's Version
Heyden, Anna von der (2023)
Charakterisierung von Flüssigkeitsfilmen mittels Laserabsorptionsspektroskopie in der Abgasnachbehandlung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024072
Ph.D. Thesis, Primary publication, Publisher's Version
Preuß, Nils ; Bodenbenner, Matthias ; Heinrichs, Benedikt ; Windeck, Jürgen ; Moser, Mario ; Fuhrmans, Marc (2023)
Creating application-specific metadata profiles while improving interoperability and consistency of research data for the engineering sciences.
doi: 10.26083/tuprints-00024573
Report, Primary publication, Preprint
Moser, Simon (2023)
Strukturgrößen zur Schwingfestigkeitsbewertung von Schweißverbindungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024472
Ph.D. Thesis, Primary publication, Publisher's Version
Lin, Binbin (2023)
Data-driven Analysis of Microstructure-Property Relation in Functional Materials.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024475
Ph.D. Thesis, Primary publication, Publisher's Version
Fong, Yan Yi (2023)
Approach to Assess the Impacts of Circular Economy Measures: Case Study of Electric Motors in the EU.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024474
Master Thesis, Primary publication, Publisher's Version
Lohaus, Katharina Natalie Silvana (2023)
Defect level identification in acceptor-doped polycrystalline barium titanate.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024453
Ph.D. Thesis, Primary publication, Publisher's Version
Ostrowski, Tom (2023)
The Aero-Thermal Impact of Rim Seal Purge Flow in Axial Turbines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024483
Ph.D. Thesis, Primary publication, Publisher's Version
Al-Falahi, Adil Fawzi Hamad (2023)
Design and Thermo Economic Evaluation of Solar Absorption Cooling Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024548
Ph.D. Thesis, Primary publication, Publisher's Version
Dieringer, Paul ; Marx, Falko ; Ströhle, Jochen ; Epple, Bernd (2023)
Chemical Looping Gasification – A Novel Process for the Sustainable Production of Biofuels.
6th Central European Biomass Conference (CEBC). Graz, Österreich (22.01.2020-24.01.2020)
doi: 10.26083/tuprints-00024417
Conference or Workshop Item, Secondary publication, Publisher's Version
Dieringer, Paul ; Marx, Falko ; Ströhle, Jochen ; Epple, Bernd (2023)
Design and Control Concept of a 1 MWth Chemical Looping Gasifier Allowing for Efficient Autothermal Syngas Production.
6th International Conference on Chemical Looping. Saragossa, Spanien (19.09.2022-22.09.2022)
doi: 10.26083/tuprints-00024418
Conference or Workshop Item, Secondary publication, Publisher's Version
Megahed, Sandra ; Krämer, Karl Michael ; Kontermann, Christian ; Heinze, Christoph ; Udoh, Annett ; Weihe, Stefan ; Oechsner, Matthias (2023)
Micro-Twinning in IN738LC Manufactured with Laser Powder Bed Fusion.
In: Materials, 2023, 16 (17)
doi: 10.26083/tuprints-00024497
Article, Secondary publication, Publisher's Version
Klinge, Lina ; Kluy, Lukas ; Spiegel, Christopher ; Siemers, Carsten ; Groche, Peter ; Coraça-Huber, Débora (2023)
Nanostructured Ti-13Nb-13Zr alloy for implant application — material scientific, technological, and biological aspects.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00024504
Article, Secondary publication, Publisher's Version
Apell, Niklas (2023)
Supersonic Close-coupled Atomization: Experimental Insights.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024473
Ph.D. Thesis, Primary publication, Publisher's Version
Mosbach, Julian (2023)
Eine automatisierte Methodik zur Planungsunterstützung in der Entwicklungszusammenarbeit - Generierung von Netzausbauvarianten zur Einführung einer leitungsgebundenen Wasserversorgungsinfrastruktur am Beispiel informeller Siedlungen in Subsahara-Afrika.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024329
Ph.D. Thesis, Primary publication, Publisher's Version
Wu, Yutian (2023)
Wear control in sheet metal forming – detection and life span estimation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024371
Ph.D. Thesis, Primary publication, Publisher's Version
Hoffmann, Andre (2023)
KI-gestützte Erkennung verkehrssicherheitstechnischer Indikatoren und Ableitung von zugehörigen Defiziten auf Grundlage der Zustandserfassung und -bewertung von Landstraßen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024366
Ph.D. Thesis, Primary publication, Publisher's Version
Hohmann, Nikolas ; Brulin, Sebastian ; Adamy, Jürgen ; Olhofer, Markus (2023)
Three-Dimensional Urban Path Planning for Aerial Vehicles Regarding Many Objectives.
In: IEEE Open Journal of Intelligent Transportation Systems, 2023, 4
doi: 10.26083/tuprints-00024467
Article, Secondary publication, Publisher's Version
Hack, Jochen (2023)
A New Methodology to Assess the Ecosystem Service Potential of Urban Rivers in Developing Countries.
19th Annual American Ecological Engineering Society Meeting (AEES). Asheville, NC, USA (03.06.2019-06.06.2019)
doi: 10.26083/tuprints-00024375
Conference or Workshop Item, Secondary publication, Publisher's Version
Steinhausen, Christoph ; Gerber, Valerie ; Stierle, Rolf ; Preusche, Andreas ; Dreizler, Andreas ; Gross, Joachim ; Weigand, Bernhard ; Lamanna, Grazia (2023)
Characterisation of the transient mixing behaviour of evaporating near-critical droplets.
In: Frontiers in Physics, 2023, 11
doi: 10.26083/tuprints-00024423
Article, Secondary publication, Publisher's Version
Dieringer, Paul ; Ströhle, Jochen ; Epple, Bernd (2023)
Chemical Looping gAsification foR sustainAble production of biofuels.
2. German Doctoral Colloquium Bioenergy. Nürnberg, Deutschland (30.09.2019-01.10.2019)
doi: 10.26083/tuprints-00024416
Conference or Workshop Item, Primary publication, Publisher's Version
Treffert, Franziska ; Curry, Chandra B. ; Ditmire, Todd ; Glenn, Griffin D. ; Quevedo, Hernan J. ; Roth, Markus ; Schoenwaelder, Christopher ; Zimmer, Marc ; Glenzer, Siegfried H. ; Gauthier, Maxence (2023)
Correction: Treffert et al. Towards High-Repetition-Rate Fast Neutron Sources Using Novel Enabling Technologies. Instruments 2021, 5, 38.
In: Instruments, 2023, 7 (3)
doi: 10.26083/tuprints-00024411
Article, Secondary publication, Publisher's Version
Knüppel, Finn ; Sun, Ang ; Wurm, Frank-Hendrik ; Hussong, Jeanette ; Torner, Benjamin (2023)
Effect of Particle Migration on the Stress Field in Microfluidic Flows of Blood Analog Fluids at High Reynolds Numbers.
In: Micromachines, 2023, 14 (8)
doi: 10.26083/tuprints-00024409
Article, Secondary publication, Publisher's Version
Patanè, Luca ; Zhao, Guoping (2023)
Editorial: Focus on methods: neural algorithms for bio-inspired robotics.
In: Frontiers in Neurorobotics, 2023, 17
doi: 10.26083/tuprints-00024404
Article, Secondary publication, Publisher's Version
Kang, Sangjun ; Wang, Di ; Caron, Arnaud ; Minnert, Christian ; Durst, Karsten ; Kübel, Christian ; Mu, Xiaoke (2023)
Direct Observation of Quadrupolar Strain Fields forming a Shear Band in Metallic Glasses.
In: Advanced Materials, 2023, 35 (25)
doi: 10.26083/tuprints-00024301
Article, Secondary publication, Publisher's Version
Faust, Erik ; Steinmetz, Felix ; Schlüter, Alexander ; Müller, Henning ; Müller, Ralf (2023)
Modelling transient stresses in dynamically loaded elastic solids using the Lattice Boltzmann Method.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (1)
doi: 10.26083/tuprints-00024294
Article, Secondary publication, Publisher's Version
Ratschow, Aaron D. ; Stein, Sigrun ; Gross, Hans‐Jürgen (2023)
Charge distribution in turbulent flow of charged liquid — Modeling and experimental validation.
In: Process Safety Progress, 2023, 42 (2)
doi: 10.26083/tuprints-00024306
Article, Secondary publication, Publisher's Version
Kappel, Andreas ; Mittelstedt, Christian (2023)
Computational model for the semi‐analytical assessment of the free‐edge effect in composite laminated shells.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (1)
doi: 10.26083/tuprints-00024302
Article, Secondary publication, Publisher's Version
Eissfeldt, Adrian (2023)
Optimierung LED-basierter adaptiver Tageslichtsysteme unter Berücksichtigung der Beobachtermetamerie.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024053
Ph.D. Thesis, Primary publication, Publisher's Version
Hallas, Martin ; Neumann, Claus ; Hinrichsen, Volker ; Gross, Detlev (2023)
Commissioning and Service Experience With a ±550 kV DC GIL Conducted in Frame of a CIGRE Prototype Installation Test.
In: IEEE Transactions on Power Delivery, 2023, 38 (4)
doi: 10.26083/tuprints-00024373
Article, Secondary publication, Postprint
Schuhmacher, Jan ; Barth, Jonas ; Ruzicic, Nada ; Kreß, Antonio ; Knott, Marius ; Panagiotopoulou, Vasiliki C. ; Stavropoulos, Panagiotis ; Kuhlenkötter, Bernd ; Hummel, Vera (2023)
Development of an Approach for a "Cross Learning Factory Product Production System" for Circular Economy.
13th Conference on Learning Factories (CLF 2023). Reutlingen, Germany (09.05.2023-11.05.2023)
doi: 10.26083/tuprints-00024357
Conference or Workshop Item, Secondary publication, Publisher's Version
Metternich, Joachim ; Kreß, Antonio (2023)
Digital-based production: introduction and fields of application.
In: Production Engineering, 2023, 17 (2)
doi: 10.26083/tuprints-00024359
Article, Secondary publication, Publisher's Version
Kreß, Antonio (2023)
Methodik zur Konfiguration von Lernfabriken für die schlanke Produktion.
doi: 10.26083/tuprints-00024365
Book, Secondary publication, Publisher's Version
Kreß, Antonio ; Metternich, Joachim (2023)
Optimierte Auswahl von Fabrikelementen.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2023, 118 (3)
doi: 10.26083/tuprints-00024358
Article, Secondary publication, Publisher's Version
Kreß, Antonio ; Metternich, Joachim (2023)
Procedure for the configuration of learning factories: Application in industry and comparison.
12th Conference on Learning Factories (CLF 2022). Singapore (11.04.2022-13.04.2022)
doi: 10.26083/tuprints-00024354
Conference or Workshop Item, Secondary publication, Publisher's Version
Kreß, Antonio ; Hummel, Vera ; Ahmad, Rafiq ; Hulla, Maria ; Quadrini, Walter ; Callupe, Maira ; Gärtner, Quirin ; Weyand, Astrid ; Barth, Jonas ; Riemann, Thomas ; Fumagalli, Luca ; Ramsauer, Christian ; Metternich, Joachim (2023)
Revision of the Learning Factory Morphology.
13th Conference on Learning Factories (CLF 2023). Reutlingen, Germany (09.05.2023-11.05.2023)
doi: 10.26083/tuprints-00024356
Conference or Workshop Item, Secondary publication, Publisher's Version
Kreß, Antonio ; Steinmeyer, Maximilian ; Longard, Lukas Philipp ; Kaiser, Joscha ; Metternich, Joachim (2023)
A product selection method for the configuration of learning factories.
12th Conference on Learning Factories (CLF 2022). Singapore (11.04.2022-13.04.2022)
doi: 10.26083/tuprints-00024355
Conference or Workshop Item, Secondary publication, Publisher's Version
El Ghadioui, Redouan
ed.: Technische Universität Darmstadt, Institut für Massivbau (2023)
Bemessung carbonbewehrter Betonbauteile unter besonderer Betrachtung des Gebrauchszustandes - Entwicklung eines Modells zur wirklichkeitsnahen Verformungsberechnung.
doi: 10.26083/tuprints-00024337
Book, Secondary publication, Publisher's Version
Fritschen, Anna ; Blaeser, Andreas (2023)
Biosynthetic, biomimetic, and self-assembled vascularized Organ-on-a-Chip systems.
In: Biomaterials, 2021, 268
doi: 10.26083/tuprints-00024336
Article, Secondary publication, Postprint
Ahmadi Tighchi, Hashem ; Kayhani, Mohammad Hasan ; Faezian, Ali ; Yeganehzad, Samira ; Miller, Reinhard (2023)
Examination of a Theoretical Model for Drainage of Foams Prepared from Licorice Root Extract Solution.
In: Colloids and Interfaces, 2023, 7 (2)
doi: 10.26083/tuprints-00024247
Article, Secondary publication, Publisher's Version
Jazayeri, Seyedsajjad ; Pourahmad, Afham ; Abdollahi, Seyyed Amirreza ; Hassanvand, Amin ; Alobaid, Falah ; Aghel, Babak (2023)
Experimental Investigation and CFD Simulation of Cryogenic Condenser.
In: Processes, 2023, 11 (6)
doi: 10.26083/tuprints-00024254
Article, Secondary publication, Publisher's Version
Volz, Lennart ; Reidel, Claire-Anne ; Durante, Marco ; Prezado, Yolanda ; Schuy, Christoph ; Weber, Uli ; Graeff, Christian (2023)
Investigating Slit-Collimator-Produced Carbon Ion Minibeams with High-Resolution CMOS Sensors.
In: Instruments, 2023, 7 (2)
doi: 10.26083/tuprints-00024251
Article, Secondary publication, Publisher's Version
Fuhrländer-Völker, Daniel (2023)
Automation Architecture for Demand Response on Aqueous Parts Cleaning Machines.
Technischen Universität Darmstadt
doi: 10.26083/tuprints-00024259
Ph.D. Thesis, Primary publication, Publisher's Version
Deußen, Benjamin (2023)
Theoretical and numerical investigation of active suspensions: Determinism, chaos and intermittency.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024230
Ph.D. Thesis, Primary publication, Publisher's Version
Goedderz, Daniela ; Weber, Lais ; Markert, Daniel ; Schießer, Alexander ; Fasel, Claudia ; Riedel, Ralf ; Altstädt, Volker ; Bethke, Christian ; Fuhr, Olaf ; Puchtler, Florian ; Breu, Josef ; Döring, Manfred (2023)
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent.
In: Journal of Applied Polymer Science, 2020, 137 (1)
doi: 10.26083/tuprints-00024255
Article, Secondary publication, Postprint
Schäfer, Lukas (2023)
Unconventional Alloy Design of (Nd, Pr)-Fe-B Based Alloys for the Production of Permanent Magnets by Additive Manufacturing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024242
Ph.D. Thesis, Primary publication, Publisher's Version
Singh, Soumya ; Ebongue, Yvonne Eboumbou ; Rezaei, Shahed ; Birke, Kai Peter (2023)
Hybrid Modeling of Lithium-Ion Battery: Physics-Informed Neural Network for Battery State Estimation.
In: Batteries, 2023, 9 (6)
doi: 10.26083/tuprints-00024089
Article, Secondary publication, Publisher's Version
Camazzola, Gianmarco ; Boscolo, Daria ; Scifoni, Emanuele ; Dorn, Alexander ; Durante, Marco ; Krämer, Michael ; Abram, Valentino ; Fuss, Martina C. (2023)
TRAX-CHEMxt: Towards the Homogeneous Chemical Stage of Radiation Damage.
In: International Journal of Molecular Sciences, 2023, 24 (11)
doi: 10.26083/tuprints-00024090
Article, Secondary publication, Publisher's Version
Schwindt, Sarah ; Theobald, Nina ; Abendroth, Bettina ; Manstetten, Dietrich (2023)
Anforderungen älterer Fahrender an das HMI automatisierter Fahrzeuge.
In: ATZ - Automobiltechnische Zeitschrift, 2022, 124
doi: 10.26083/tuprints-00024066
Article, Secondary publication, Postprint
Schwindt, Sarah (2023)
Einfluss mentaler Modelle auf das Situationsbewusstsein und die Übernahmeleistung von Fahrer:innen in automatisierten Fahrzeugen.
Technologie und Bildung in hybriden Arbeitswelten. Magdeburg (02.03.2022-04.03.2022)
doi: 10.26083/tuprints-00024065
Conference or Workshop Item, Secondary publication, Publisher's Version
Azambuja, Antonio João Gonçalves de ; Plesker, Christian ; Schützer, Klaus ; Anderl, Reiner ; Schleich, Benjamin ; Almeida, Vilson Rosa (2023)
Artificial Intelligence-Based Cyber Security in the Context of Industry 4.0 — A Survey.
In: Electronics, 2023, 12 (8)
doi: 10.26083/tuprints-00023791
Article, Secondary publication, Publisher's Version
Reichel, Maximilian ; Schröder, Jörg ; Xu, Bai-Xiang (2023)
Efficient micromagnetic finite element simulations using a perturbed Lagrange multiplier method.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023680
Article, Secondary publication, Publisher's Version
Stysch, Jonathan ; Klaedtke, Andreas ; De Gersem, Herbert ; Aichele, Hermann (2023)
Efficient sensitivity analysis of lumped elements with respect to finite‐element geometry changes.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2022, 36 (3)
doi: 10.26083/tuprints-00023700
Article, Secondary publication, Publisher's Version
Sharifi Ghalehnoei, Mohammadsina ; Javanmardi, Ahad ; Izadifar, Mohammadreza ; Ukrainczyk, Neven ; Koenders, Eduardus (2023)
Finite Element Analysis of Shear Reinforcing of Reinforced Concrete Beams with Carbon Fiber Reinforced Polymer Grid-Strengthened Engineering Cementitious Composite.
In: Buildings, 2023, 13 (4)
doi: 10.26083/tuprints-00023790
Article, Secondary publication, Publisher's Version
Rust, Christian ; Shapturenka, Pavel ; Spari, Manuel ; Jin, Qihao ; Li, Han ; Bacher, Andreas ; Guttmann, Markus ; Zheng, Ming ; Adel, Tehseen ; Hight Walker, Angela R. ; Fagan, Jeffrey A. ; Flavel, Benjamin S. (2023)
The Impact of Carbon Nanotube Length and Diameter on their Global Alignment by Dead‐End Filtration.
In: Small : nano micro, 2023, 19 (10)
doi: 10.26083/tuprints-00023701
Article, Secondary publication, Publisher's Version
Ebrahem, Adnan ; Hiemstra, René R. ; Stoter, Stein K. F. ; Schillinger, Dominik (2023)
Modeling of Growth using an Immersed Finite Element Method.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023689
Article, Secondary publication, Publisher's Version
Iankevich, Gleb ; Sarkar, Abhishek ; Katnagallu, Shyam ; Chellali, Mohammed Reda ; Wang, Di ; Velasco, Leonardo ; Singh, Ruby ; Reisinger, Thomas ; Kruk, Robert ; Hahn, Horst (2023)
A New Class of Cluster-Matrix Nanocomposite Made of Fully Miscible Components.
In: Advanced Materials, 2023, 35 (9)
doi: 10.26083/tuprints-00023708
Article, Secondary publication, Publisher's Version
Harandi, Ali ; Tabib, Majd ; Alatassi, Baker ; Brepols, Tim ; Rezaei, Shahed ; Reese, Stefanie (2023)
A comparative study between phase‐field and micromorphic gradient‐extended damage models for brittle fracture.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023693
Article, Secondary publication, Publisher's Version
Henkel, Marvin‐Lucas ; Kasolis, Fotios ; Schöps, Sebastian ; Clemens, Markus (2023)
A comparative study on electromagnetic quasistatic time‐domain field calculations.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2021, 36 (3)
doi: 10.26083/tuprints-00023681
Article, Secondary publication, Publisher's Version
Methfessel, Thomas S. ; Becker, Wilfried (2023)
A geometrical parameter study of the analytical stress calculation in adhesive joints with thick bonding layers.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023710
Article, Secondary publication, Publisher's Version
Georges, Hussam ; Mittelstedt, Christian ; Becker, Wilfried (2023)
Analysis of strut‐based lattice cores in sandwich panels using homogenization and dehomogenization methods.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023744
Article, Secondary publication, Publisher's Version
Xiu, Yanlei ; Mauri, Anna ; Dinda, Sirshendu ; Pramudya, Yohanes ; Ding, Ziming ; Diemant, Thomas ; Sarkar, Abhishek ; Wang, Liping ; Li, Zhenyou ; Wenzel, Wolfgang ; Fichtner, Maximilian ; Zhao‐Karger, Zhirong (2023)
Anion Storage Chemistry of Organic Cathodes for High‐Energy and High‐Power Density Divalent Metal Batteries.
In: Angewandte Chemie International Edition, 2023, 62 (2)
doi: 10.26083/tuprints-00023697
Article, Secondary publication, Publisher's Version
Xiu, Yanlei ; Mauri, Anna ; Dinda, Sirshendu ; Pramudya, Yohanes ; Ding, Ziming ; Diemant, Thomas ; Sarkar, Abhishek ; Wang, Liping ; Li, Zhenyou ; Wenzel, Wolfgang ; Fichtner, Maximilian ; Zhao‐Karger, Zhirong (2023)
Anionen‐Einlagerungschemie organischer Kathoden für zweiwertige Metallbatterien mit hoher Energie und hoher Leistungsdichte.
In: Angewandte Chemie, 2023, 135 (2)
doi: 10.26083/tuprints-00023728
Article, Secondary publication, Publisher's Version
Marr, Julian ; Zartmann, Lukas ; Reinel-Bitzer, Doris ; Andrä, Heiko ; Müller, Ralf (2023)
Data‐based prediction of the viscoelastic behavior of short fiber reinforced composites.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023733
Article, Secondary publication, Publisher's Version
Herter, Christine ; Schöps, Sebastian ; Wollner, Winnifried (2023)
Eigenvalue Optimization with respect to Shape‐Variations in Electromagnetic Cavities.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023725
Article, Secondary publication, Publisher's Version
Magino, Nicola ; Köbler, Jonathan ; Andrä, Heiko ; Welschinger, Fabian ; Müller, Ralf ; Schneider, Matti (2023)
Factors influencing the dynamic stiffness in short‐fiber reinforced polymers.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2023, 22 (1)
doi: 10.26083/tuprints-00023732
Article, Secondary publication, Publisher's Version
Thammineni, Hari Kisan ; Zhu, Tong ; Smaga, Marek ; Beck, Tilmann ; Müller, Ralf (2023)
Numerical modelling of stress‐strain response and deformation‐induced martensite in metastable austenitic stainless steels under monotonic tensile loading.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023735
Article, Secondary publication, Publisher's Version
Einert, Marcus ; Waheed, Arslan ; Lauterbach, Stefan ; Mellin, Maximilian ; Rohnke, Marcus ; Wagner, Lysander Q. ; Gallenberger, Julia ; Tian, Chuanmu ; Smarsly, Bernd M. ; Jaegermann, Wolfram ; Hess, Franziska ; Schlaad, Helmut ; Hofmann, Jan P. (2023)
Sol‐Gel‐Derived Ordered Mesoporous High Entropy Spinel Ferrites and Assessment of Their Photoelectrochemical and Electrocatalytic Water Splitting Performance.
In: Small : nano micro, 2023, 19 (14)
doi: 10.26083/tuprints-00023727
Article, Secondary publication, Publisher's Version
Schweidler, Simon ; Schopmans, Henrik ; Reiser, Patrick ; Boltynjuk, Evgeniy ; Olaya, Jhon Jairo ; Singaraju, Surya Abhishek ; Fischer, Franz ; Hahn, Horst ; Friederich, Pascal ; Velasco, Leonardo (2023)
Synthesis and Characterization of High‐Entropy CrMoNbTaVW Thin Films Using High‐Throughput Methods.
In: Advanced Engineering Materials, 2022, 25 (2)
doi: 10.26083/tuprints-00023731
Article, Secondary publication, Publisher's Version
Maheu, Clément ; Zare Pour, Mohammad Amin ; Damestoy, Iban ; Ostheimer, David ; Mellin, Maximilian ; Moritz, Dominik C. ; Paszuk, Agnieszka ; Jaegermann, Wolfram ; Mayer, Thomas ; Hannappel, Thomas ; Hofmann, Jan P. (2023)
Tapered Cross Section Photoelectron Spectroscopy Provides Insights into the Buried Interfaces of III‐V Semiconductor Devices.
In: Advanced Materials Interfaces, 2023, 10 (3)
doi: 10.26083/tuprints-00023734
Article, Secondary publication, Publisher's Version
Sondershaus, Rabea ; Humbert, Angelika ; Müller, Ralf (2023)
A phase field model for fractures in ice shelves.
In: PAMM - Proceedings in Applied Mathematics & Mechanics, 2022, 22 (1)
doi: 10.26083/tuprints-00023729
Article, Secondary publication, Publisher's Version
Röhl, Susanne ; Hohl, Lena ; Stock, Sebastian ; Zhan, Manlin ; Kopf, Tobias ; Klitzing, Regine von ; Kraume, Matthias (2023)
Application of Population Balance Models in Particle-Stabilized Dispersions.
In: Nanomaterials, 2023, 13 (4)
doi: 10.26083/tuprints-00023346
Article, Secondary publication, Publisher's Version
Vidjak, Klementina ; Hessinger, Carolin ; Cavagnaro, Marta (2023)
Broadband Dielectric Spectroscopy with a Microwave Ablation Antenna.
In: Sensors, 2023, 23 (5)
doi: 10.26083/tuprints-00023348
Article, Secondary publication, Publisher's Version
Hoyer, Ingo ; Utz, Alexander ; Lüdecke, André ; Kappert, Holger ; Rohr, Maurice ; Hoog Antink, Christoph ; Seidl, Karsten (2023)
Design of Hardware Accelerators for Optimized and Quantized Neural Networks to Detect Atrial Fibrillation in Patch ECG Device with RISC-V.
In: Sensors, 2023, 23 (5)
doi: 10.26083/tuprints-00023648
Article, Secondary publication, Publisher's Version
Aghel, Babak ; Yahya, Salah I. ; Rezaei, Abbas ; Alobaid, Falah (2023)
A Dynamic Recurrent Neural Network for Predicting Higher Heating Value of Biomass.
In: International Journal of Molecular Sciences, 2023, 24 (6)
doi: 10.26083/tuprints-00023649
Article, Secondary publication, Publisher's Version
Nishad, Kaushal ; Agrebi, Senda (2023)
Estimation of Entropy Generation in a SCR-DeNOx System with AdBlue Spray Dynamic Using Large Eddy Simulation.
In: Entropy, 2023, 25 (3)
doi: 10.26083/tuprints-00023646
Article, Secondary publication, Publisher's Version
Guimarães, Túlio Caetano ; Gomes, Otavio da Fonseca Martins ; Oliveira de Araújo, Olga Maria ; Lopes, Ricardo Tadeu ; da-Gloria, M´hamed Yassin Rajiv ; Toledo Filho, Romildo Dias ; Koenders, Eddie ; Caggiano, Antonio ; Mankel, Christoph ; Nazari Sam, Mona ; Mendes de Andrade, Rodolfo Giacomim ; Ferreira, Saulo Rocha (2023)
PCM-Impregnated Textile-Reinforced Cementitious Composite for Thermal Energy Storage.
In: Textiles, 2023, 3 (1)
doi: 10.26083/tuprints-00023349
Article, Secondary publication, Publisher's Version
Faress, Fardad ; Pourahmad, Afham ; Abdollahi, Seyyed Amirreza ; Safari, Mohammad Hossein ; Mozhdeh, Mozhgan ; Alobaid, Falah ; Aghel, Babak (2023)
Phase Equilibria Simulation of Biomaterial-Hydrogen Binary Systems Using a Simple Empirical Correlation.
In: Processes, 2023, 11 (3)
doi: 10.26083/tuprints-00023350
Article, Secondary publication, Publisher's Version
Yadav, Rahul ; Ludwig, Florian ; Faridi, Fahd Rushd ; Klopf, J. Michael ; Roskos, Hartmut G. ; Preu, Sascha ; Penirschke, Andreas (2023)
State-of-the-Art Room Temperature Operable Zero-Bias Schottky Diode-Based Terahertz Detector Up to 5.56 THz.
In: Sensors, 2023, 23 (7)
doi: 10.26083/tuprints-00023647
Article, Secondary publication, Publisher's Version
Wang, Hui ; Chen, Xi ; Koenders, Eduardus ; Dai, Ying ; Huang, Xingchun ; Ai, Qing ; Yuan, Yong (2023)
Transient Nonlinear Heat Conduction in Concrete Structures: A Semi-Analytical Approach.
In: Entropy, 2023, 25 (4)
doi: 10.26083/tuprints-00023645
Article, Secondary publication, Publisher's Version
Sinn, Jochen (2023)
Waste stabilization ponds for water reuse in water scarce regions.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023447
Ph.D. Thesis, Primary publication, Publisher's Version
Leise, Philipp (2023)
Algorithmic Conceptual Design of Technical Systems Under Uncertainty.
doi: 10.26083/tuprints-00023403
Book, Secondary publication, Postprint
Mueh, Mario ; Knieß, Robert ; Göringer, H. Ulrich ; Damm, Christian (2023)
Concepts for millimeter wave-based detection of African trypanosomes in field-compatible liquid systems.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023210
Article, Secondary publication, Publisher's Version
Jakoby, Rolf (2023)
Editorial.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023207
Article, Secondary publication, Publisher's Version
Hessinger, Carolin ; Hübner, Frank ; Schüßler, Martin ; Paravicini, Markus ; Ketomäki, Markus ; Vogl, Thomas ; Jakoby, Rolf (2023)
Evolution of a theranostic applicator for microwave ablation treatment.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023213
Article, Secondary publication, Publisher's Version
Gwozdz, Paul V. ; Harberts, Jann ; Zierold, Robert ; Blick, Robert H. (2023)
Label-free single-cell counting and characterization in the GHz-range.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023216
Article, Secondary publication, Publisher's Version
Hecht, Damaris ; Ullmann, Ingrid ; Oppelt, Daniel ; Pfahler, Tim ; Amer, Nadia ; Vossiek, Martin (2023)
Millimeter-wave imaging and near-field spectroscopy for burn wound assessment.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023211
Article, Secondary publication, Publisher's Version
Ghosh, Eashika ; Egunov, Aleksandr I. ; Karnaushenko, Daniil ; Medina-Sánchez, Mariana ; Schmidt, Oliver G. (2023)
Self-assembled sensor-in-a-tube as a versatile tool for label-free EIS viability investigation of cervical cancer cells.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023217
Article, Secondary publication, Publisher's Version
Chavarin, Carlos Alvarado ; Hardt, Elena ; Skibitzki, Oliver ; Voss, Thomas ; Eissa, Mohammed ; Spirito, Davide ; Capellini, Giovanni ; Baldassarre, Leonetta ; Flesch, Julia ; Piehler, Jacob ; You, Changjiang ; Grüssing, Sönke ; Römer, Friedhard ; Witzigmann, Bernd (2023)
Terahertz subwavelength sensing with bio-functionalized germanium fano-resonators.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023209
Article, Secondary publication, Publisher's Version
Heine, Carl ; Durmaz, Emre Can ; Wang, Defu ; Cao, Zhibo ; Wietstruck, Matthias ; Tillack, Bernd ; Kissinger, Dietmar (2023)
Towards a fully integrated sub-THz microfluidic sensor platform for dielectric spectroscopy.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023214
Article, Secondary publication, Publisher's Version
Hassan, Mohamed Atef ; Kern, Michal ; Chu, Anh ; Kalra, Gatik ; Shabratova, Ekaterina ; Tsarapkin, Aleksei ; MacKinnon, Neil ; Lips, Klaus ; Teutloff, Christian ; Bittl, Robert ; Korvink, Jan Gerrit ; Anders, Jens (2023)
Towards single-cell pulsed EPR using VCO-based EPR-on-a-chip detectors.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023215
Article, Secondary publication, Publisher's Version
Richter, Merle ; Loth, Yannik ; Weisenstein, Christian ; Wigger, Anna Katharina ; Schaar, Dominik ; Bosserhoff, Anja Katrin ; Haring Bolívar, Peter (2023)
Ultrasensitive marker-free biomolecular THz-detection for tumor-related analytics.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023208
Article, Secondary publication, Publisher's Version
Rothbart, Nick ; Schmalz, Klaus ; Koczulla, Rembert ; Hübers, Heinz-Wilhelm (2023)
A compact breath gas sensor system based on terahertz/millimeter-wave gas spectroscopy.
In: Frequenz, 2022, 76 (11-12)
doi: 10.26083/tuprints-00023212
Article, Secondary publication, Publisher's Version
Reuter, Christian (2023)
Communication between Power Blackout and Mobile Network Overload.
In: E-Health and Telemedicine, 2016
doi: 10.26083/tuprints-00022502
Book Section, Secondary publication, Publisher's Version
Reuter, Christian (2023)
Communication between Power Blackout and Mobile Network Overload.
In: International Journal of Information Systems for Crisis Response and Management, 2014, 6 (2)
doi: 10.26083/tuprints-00022506
Article, Secondary publication, Publisher's Version
Polat, Ersin (2023)
Grundlegende Untersuchungen von abstimmbaren Flüssigkristall-Filtern für Hochfrequenzanwendungen.
doi: 10.26083/tuprints-00023278
Book, Primary publication, Publisher's Version
Häuser, Kevin ; Zhou, Zhiren ; Agrawal, Prannoy ; Jakoby, Rolf ; Maune, Holger ; Binder, Joachim R. (2023)
Network-Structured BST/MBO Composites Made from Core-Shell-Structured Granulates.
In: Materials, 2023, 16 (2)
doi: 10.26083/tuprints-00023272
Article, Secondary publication, Publisher's Version
Muheirwe, Florence ; Kihila, Jacob Mabula ; Kombe, Wilbard Jackson ; Campitelli, Alessio (2023)
Solid waste management regulation in the informal settlements: A social-ecological context from Kampala city, Uganda.
In: Frontiers in Sustainability, 2023, 4
doi: 10.26083/tuprints-00023276
Article, Secondary publication, Publisher's Version
Homolla, Tobias ; Winner, Hermann (2023)
Encapsulated trajectory tracking control for autonomous vehicles.
In: Automotive and Engine Technology, 2022, 7 (3-4)
doi: 10.26083/tuprints-00023244
Article, Secondary publication, Publisher's Version
Passieux, Jean‐Charles ; Bouclier, Robin ; Weeger, Oliver (2023)
Image‐based isogeometric twins of lattices with virtual image correlation for varying cross‐section beams.
In: International Journal for Numerical Methods in Engineering, 2023
doi: 10.26083/tuprints-00023180
Article, Secondary publication, Postprint
Lorenzo, Natasha Dantas ; Seibert Kuhn, Leonardo ; Caetano Guimarães, Túlio ; Nazari Sam, Mona ; Mankel, Christoph ; Caggiano, Antonio ; Koenders, Eduardus ; Nunes, Cleiton Antonio ; Ferreira, Saulo Rocha (2023)
Potential Use of Bio-Oleogel as Phase Change Material.
In: Sustainability, 2023, 15 (3)
doi: 10.26083/tuprints-00023177
Article, Secondary publication, Publisher's Version
Stuckert, Alexander ; Khanh, Tran Quoc (2023)
Resolution Aspects for Near-Field Projections.
In: Applied Sciences, 2023, 13 (2)
doi: 10.26083/tuprints-00023172
Article, Secondary publication, Publisher's Version
Brinkmann, Maximilian (2023)
Tragfähigkeit druckbeanspruchten Lehmmauerwerks unter Berücksichtigung nichtlinearer Feuchteprofile.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023136
Ph.D. Thesis, Primary publication, Publisher's Version
Schäfer, Stefan
eds.: Schäfer, Stefan ; Winter, Stefan ; Technische Universität Darmstadt, Konstruktives Gestalten und Baukonstruktion (2023)
KGBauko aktuell.
2019, 2019 (19)
doi: 10.26083/tuprints-00009274
Journal, Secondary publication, Publisher's Version
Rosenberger, Philipp (2023)
Metrics for Specification, Validation, and Uncertainty Prediction for Credibility in Simulation of Active Perception Sensor Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023034
Ph.D. Thesis, Primary publication, Publisher's Version
ed.: Groche, Peter (2023)
12. Fachtagung Walzprofilieren - 22.03.-23.03.2023.
12. Fachtagung Walzprofilieren. Darmstadt, Germany (22.03.2023-23.03.2023)
doi: 10.26083/tuprints-00023407
Conference or Workshop Item, Primary publication, Publisher's Version
Bell, Alena Katharina (2023)
Abbildendes Raman Deuterium Stable Isotope Probing von Fluidgemischen in Tropfen und Mikrokanälen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023855
Ph.D. Thesis, Primary publication, Publisher's Version
Keil, Ferdinand (2023)
Accelerated Lifetime Testing of Off-Line LED Drivers.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023782
Ph.D. Thesis, Primary publication, Publisher's Version
Lutwitzi, Melina (2023)
An Active Safety System for Wheeled Mobile Driving Simulators.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023786
Ph.D. Thesis, Primary publication, Publisher's Version
Schäffner, Maximilian Frederic ; Platz, Roland (2023)
Active buckling control of an imperfect beam-column with circular cross-section using piezoelastic supports and integral LQR control.
In: Journal of Physics: Conference Series, 2016, 2016 (744)
doi: 10.26083/tuprints-00023755
Article, Secondary publication, Publisher's Version
Beck, Mark ; Schwung, Andreas ; Münchhof, Marco ; Isermann, Rolf (2023)
Active fault tolerant control of an electro-hydraulic servo axis with a duplex-valve-system.
In: IFAC Proceedings Volumes, 2010, 43 (18)
doi: 10.26083/tuprints-00023320
Article, Secondary publication, Publisher's Version
Pätzold, Maximilian (2023)
Adaptive Positionierung großer Arbeitsobjekte in der industriellen Montage zur Reduktion von physischen Belastungen.
Frühjahrskongress 2023 - Nachhaltig Arbeiten und Lernen - Analyse und Gestaltung lernförderlicher und nachhaltiger Arbeitssysteme und Arbeits- und Lernprozesse. Hannover, Germany (01.03.2023-03.03.2023)
doi: 10.26083/tuprints-00023640
Conference or Workshop Item, Secondary publication, Publisher's Version
Kauer-Franz, Michaela ; Franz, Benjamin ; Abendroth, Bettina (2023)
Akzeptanz teilautomatisierter Fahrzeugführung : Rollen, Aufgaben, Emotionen: Erkenntnisse aus 7 Jahren Forschung.
7. Tagung Fahrerassistenz. München (25.11.2015-26.11.2015)
doi: 10.26083/tuprints-00023843
Conference or Workshop Item, Secondary publication, Publisher's Version
Brauner, Anna-Katharina (2023)
Algorithmen zur (teil-)automatisierten betrieblichen und verkehrlichen Bewertung von Störfallprogrammen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023651
Ph.D. Thesis, Primary publication, Publisher's Version
Pätzold, Maximilian ; Klaer, Verena ; Wakula, Jurij (2023)
Analyse der Durchblutung in ausgewählten Schultermuskeln bei der Ausführung statischer Überkopfarbeit mit passivem Exoskelett in einer Laborstudie.
Frühjahrskongress 2022 - Technologie und Bildung in hybriden Arbeitswelten. Magdeburg, Germany (02.03.2022-04.03.2022)
doi: 10.26083/tuprints-00023639
Conference or Workshop Item, Secondary publication, Publisher's Version
Stockinger, Christopher ; Zöller, Ilka (2023)
Analyse des Einflusses von Gestaltungsparametern von Werkerführungssystemen auf deren Nutzung, Gefallen und Wirtschaftlichkeit im Kontext Montage.
Arbeit interdisziplinär analysieren – bewerten – gestalten. 65. Kongress der Gesellschaft für Arbeitswissenschaft. Dresden (27.02.2019-01.03.2019)
doi: 10.26083/tuprints-00023794
Conference or Workshop Item, Secondary publication, Publisher's Version
Menges, Karin (2023)
Analyse stadt- und verkehrsplanerischer Einflüsse auf die Gesundheit. Eine vergleichende Untersuchung in Deutschland und Vietnam.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023051
Ph.D. Thesis, Primary publication, Publisher's Version
Linnhoff, Clemens (2023)
Analysis of Environmental Influences for Simulation of Active Perception Sensors.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023116
Ph.D. Thesis, Primary publication, Publisher's Version
Husarek, Dominik (2023)
Analysis of sector-coupling effects between the mobility sector and the energy system under consideration of energy transport and charging infrastructure.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023140
Ph.D. Thesis, Primary publication, Publisher's Version
Franceschi, Alessandro (2023)
Anforderungsspezifische Einstellung des Eigenspannungszustands in der Kaltmassivumformung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023286
Ph.D. Thesis, Primary publication, Publisher's Version
Cuno, Bernd ; Neddermeyer, Werner (2023)
Application of a Multivariable Robust Controller Design Method to Hard-Coal Preparation.
In: IFAC Proceedings Volumes, 1985, 18 (8)
doi: 10.26083/tuprints-00023395
Article, Secondary publication, Publisher's Version
Campitelli, Alessio ; Aryoug, Oumaima ; Ouazzani, Naaila ; Bockreis, Anke ; Schebek, Liselotte (2023)
Assessing the performance of a waste management system towards a circular economy in the Global South: The case of Marrakech (Morocco).
In: Waste Management, 2023, 166
doi: 10.26083/tuprints-00024052
Article, Secondary publication, Publisher's Version
Ersü, Enis ; Wienand, S. (2023)
An Associative Memory Based Learning Control Scheme with PI-Controller for SISO-Nonlinear Processes.
In: IFAC Proceedings Volumes, 1986, 20 (4)
doi: 10.26083/tuprints-00023393
Article, Secondary publication, Publisher's Version
Köhs, Lukas (2023)
Bayesian inference and learning in switching biological systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023022
Ph.D. Thesis, Primary publication, Publisher's Version
Engel, Alexander (2023)
Beitrag zur Momenten-Auflager-Interaktion von Sandwichelementen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023806
Ph.D. Thesis, Primary publication, Publisher's Version
Hiesch, Dominik (2023)
Bemessung von Betonfertigteilen mit vorgespannter Bewehrung aus Faserverbundkunststoff : Entwicklung eines Bemessungskonzeptes unter Berücksichtigung wirklichkeitsnaher Bauteilverformungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023408
Ph.D. Thesis, Primary publication, Publisher's Version
Schwing, Romana (2023)
Beschleunigte Kriechdehnungsentwicklung unter Temperaturwechsel-Beanspruchung - Eine experimentelle und modelltheoretische Beschreibung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022827
Ph.D. Thesis, Primary publication, Publisher's Version
Bettenhausen, Kurt Dirk ; Gehlen, Stefan ; Marenbach, Peter ; Tolle, Henning (2023)
BioX⁺⁺ - New Results and Conceptions Concerning the Intelligent Control of Biotechnological Processes.
In: IFAC Proceedings Volumes, 1995, 28 (3)
doi: 10.26083/tuprints-00023361
Article, Secondary publication, Publisher's Version
Bettenhausen, Kurt Dirk ; Tolle, Henning (2023)
BioX⁺⁺-Extended Learning Control of Biotechnological Processes.
In: IFAC Proceedings Volumes, 1993, 26 (2)
doi: 10.26083/tuprints-00023369
Article, Secondary publication, Publisher's Version
Knöll, Martin
eds.: Knöll, Martin ; Vöckler, Kai ; Eckart, Peter ; Lanzendorf, Martin (2023)
Blaue Bewegungsräume: Der Frankfurter Mainkai aus Sicht einer gesundheitsförderlichen Stadtgestaltung.
In: Mobility Design: Die Zukunft der Mobilität gestalten, 2021
doi: 10.26083/tuprints-00023335
Book Section, Secondary publication, Publisher's Version
Kurz, Andreas (2023)
Building Maps Based on a Learned Classification of Ultrasonic Range Data.
In: IFAC Proceedings Volumes, 1993, 26 (1)
doi: 10.26083/tuprints-00023360
Article, Secondary publication, Publisher's Version
Gräser, Axel ; Neddermeyer, Werner ; Tolle, Henning (2023)
CAD of the Horowitz/Sidi-Design for Feedback Systems with Large Plant Parameter Uncertainty.
In: IFAC Proceedings Volumes, 1982, 16 (19)
doi: 10.26083/tuprints-00023399
Article, Secondary publication, Publisher's Version
Dieringer, Paul ; Marx, Falko ; Ströhle, Jochen ; Epple, Bernd (2023)
CLARA - Chemical Looping Gasification for Sustainable Production of Biofuels.
Paving the way torwards clean energy and fuels in European Commission. Lissabon, Portugal (29.05.2019-29.05.2019)
doi: 10.26083/tuprints-00024396
Conference or Workshop Item, Primary publication, Publisher's Version
Lippert, Moritz (2023)
Capability-Based Routes for Autonomous Vehicles.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023777
Ph.D. Thesis, Primary publication, Publisher's Version
Abrha, Berhane ; Sakaguchi‐Söder, Kaori ; Schüth, Christoph (2023)
Chlorine isotope fractionation during catalytic reductive dechlorination of Trichloromethane (CHCl₃) over palladium-on-alumina in hydrogen-saturated water: implication to managed aquifer recharge as sustainable storage solution for desalinated water (MAR-DSW) in Menashe recharge basin, Israel.
10th International Symposium on Managed Aquifer Recharge (ISMAR10). Madrid, Spain (20.05.2019-24.05.2019)
doi: 10.26083/tuprints-00023767
Conference or Workshop Item, Secondary publication, Publisher's Version
Mouratidis, Panagiotis (2023)
Combined Kinetic and Electrochemical Energy Storage Systems Offering Balancing Services to Electrical Grids.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022960
Ph.D. Thesis, Primary publication, Publisher's Version
Kiekenap, Kilian (2023)
Communication Resource Allocation in Wireless Networked Control Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022932
Ph.D. Thesis, Primary publication, Publisher's Version
Mao, Xiaozhao (2023)
Computational Complexity of Path Planning Algorithms Based on Safe Triangles and Quadtree as Work Space Representations: A Comparison.
In: IFAC Proceedings Volumes, 1991, 24 (9)
doi: 10.26083/tuprints-00023387
Article, Secondary publication, Publisher's Version
Joksimović, Ivan (2023)
Computational study of thermotechnical two-phase flow configurations with scale-resolving turbulence models.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023766
Ph.D. Thesis, Primary publication, Publisher's Version
Gräser, Axel ; Neddermeyer, Werner ; Tolle, Henning (2023)
Computer Aided Controller Design for a Multiaxial Servohydraulic Vibration Test Bench with Large Parameter Uncertainties.
In: IFAC Proceedings Volumes, 1982, 16 (19)
doi: 10.26083/tuprints-00023400
Article, Secondary publication, Publisher's Version
Elsayed, Hesham Nabil Abdelrahman (2023)
Computer-supported movement guidance: investigating visual/visuotactile guidance and informing the design of vibrotactile body-worn interfaces.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023857
Ph.D. Thesis, Primary publication, Publisher's Version
Tastan, Aylin (2023)
Contributions to Robust Graph Clustering: Spectral Analysis and Algorithms.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024068
Ph.D. Thesis, Primary publication, Publisher's Version
Parks, P. C. ; Militzer, Jürgen (2023)
Convergence Properties of Associative Memory Storage for Learning Control Systems.
In: IFAC Proceedings Volumes, 1989, 23 (1)
doi: 10.26083/tuprints-00023388
Article, Secondary publication, Publisher's Version
Schäfer, Stefan ; Kieu, Le Thi (2023)
Cooling Effects of Blue and Green Infrastructure on Urban Microclimate: A Case Study at Thu Duc District, Ho Chi Minh City.
International Conference on Sustainable Urban Development. Ho Chi Minh City (20.10.2022-20.10.2022)
doi: 10.26083/tuprints-00023019
Conference or Workshop Item, Primary publication, Publisher's Version
Bruhm, Hartmut (2023)
Coordinated Motion Planning and Optimal Force Distribution for Robots with Multiple Cooperating Arms.
In: IFAC Proceedings Volumes, 1985, 18 (16)
doi: 10.26083/tuprints-00023397
Article, Secondary publication, Publisher's Version
Triller, Jens (2023)
Crashworthiness Optimization using difference-based equivalent static Loads - Sizing and Topology Optimization of Structures subjected to Crash.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023667
Ph.D. Thesis, Primary publication, Publisher's Version
Fertig, Alexander Joachim (2023)
Datenbasierte, prozessparallele Qualitätsprognose für spanend hergestellte Werkstücke mittels maschinellen Lernens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024112
Ph.D. Thesis, Primary publication, Publisher's Version
Fuhrländer, Mona (2023)
Design Methods for Reducing Failure Probabilities with Examples from Electrical Engineering.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023038
Ph.D. Thesis, Primary publication, Publisher's Version
Zeiss, Julian (2023)
Design and evaluation of a powered prosthetic foot with monoarticular and biarticular actuation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024330
Ph.D. Thesis, Primary publication, Publisher's Version
Quurck, Lukas ; Richter, Michael ; Schneider, Maximilian ; Franz, Daniel ; Rinderknecht, Stephan (2023)
Design and practical Realization of an innovative Flywheel Concept for industrial Applications.
In: Technische Mechanik, 2017, 37 (2-5)
doi: 10.26083/tuprints-00023170
Article, Secondary publication, Publisher's Version
Reichardt, Benjamin ; Mihailescu-Stoica, Dinu ; Adamy, Jürgen ; Domont-Yankulova, Dilyana ; Klingbeil, Harald ; Lens, Dieter (2023)
Design and tuning of digital filters for RF feedback loops in heavy-ion synchrotrons.
doi: 10.26083/tuprints-00023266
Report, Secondary publication, Publisher's Version
Wissel, Sebastian (2023)
Determination of effective electric conductivity of UFG/PEI-composites considering quantum mechanical tunnelling effects.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023035
Master Thesis, Primary publication, Publisher's Version
Paliotto, Andrea (2023)
Development of a Human Factors Evaluation Procedure for Network-wide Road Safety Assessments.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022962
Ph.D. Thesis, Primary publication, Publisher's Version
Wowra, Karoline (2023)
Development of an LCA-based approach for a regional assessment of the environmental impacts of nitrogen in crop production systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023257
Ph.D. Thesis, Primary publication, Publisher's Version
Kannapinn, Maximilian (2023)
Digital Twins for Autonomous Thermal Food Processing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024386
Ph.D. Thesis, Primary publication, Publisher's Version
Haumann, Dominik ; Willert, Volker ; Listmann, Kim D. (2023)
DisCoverage: From Coverage to Distributed Multi-Robot Exploration.
In: IFAC Proceedings Volumes, 2013, 46 (27)
doi: 10.26083/tuprints-00023296
Article, Secondary publication, Publisher's Version
Tatarenko, Tatiana ; Zimmermann, Jan (2023)
Distributed optimization methods for N-cluster games.
In: at - Automatisierungstechnik, 2022, 70 (3)
doi: 10.26083/tuprints-00023282
Article, Secondary publication, Publisher's Version
Pleß, Raphael Amadeus Maria (2023)
Dual Loop Rider Control of a Dynamic Motorcycle Riding Simulator.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023983
Ph.D. Thesis, Primary publication, Publisher's Version
Rutsch, Matthias (2023)
Duct acoustics for air-coupled ultrasonic phased arrays.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023129
Ph.D. Thesis, Primary publication, Publisher's Version
Harder, André (2023)
Ein Beitrag zur Beschreibung des Fortschrittes elektrischer Schädigung in Wälzlagern.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024360
Ph.D. Thesis, Primary publication, Publisher's Version
Kleiner, Jonas (2023)
Ein Beitrag zur Entwicklung von Baustellenversorgungssystemen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024343
Ph.D. Thesis, Primary publication, Publisher's Version
Kosel, Christopher (2023)
Ein Beitrag zur Prozessautomatisierung im Bauprojekt-Controlling.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022995
Ph.D. Thesis, Primary publication, Publisher's Version
Frey, Christopher (2023)
Ein Beitrag zur geschlossen-analytischen Modellierung des Randeffekts und der interlaminaren Rissentstehung in ebenen Mehrschichtverbunden.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024182
Ph.D. Thesis, Primary publication, Publisher's Version
Müller, Andreas ; Zöller, Ilka ; Gärtner, Hendrik ; Schlögel, Daniel ; Graag, Gerrit de ; Abendroth, Bettina (2023)
Ein-/Ausstieg in einen PKW – Besteht Unterstützungsbedarf bei älteren Menschen?
Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft - 63. Kongress der Gesellschaft für Arbeitswissenschaft. Brugg, Switzerland (15.02.2017-17.02.2017)
doi: 10.26083/tuprints-00023775
Conference or Workshop Item, Secondary publication, Publisher's Version
Abendroth, Bettina ; Schwindt, Sarah (2023)
Einsatz von Gamification-Elementen zur Unterstützung der Fahrzeugführungsaufgabe.
Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft - 63. Kongress der Gesellschaft für Arbeitswissenschaft. Brugg, Switzerland (15.02.2017-17.02.2017)
doi: 10.26083/tuprints-00023776
Conference or Workshop Item, Secondary publication, Publisher's Version
Titilayo, Jammie (2023)
Enclave Urbanism and Infrastructure Outcomes: The Eko Atlantic City and Urban Sustainability Issues in Lagos, Nigeria.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024195
Ph.D. Thesis, Primary publication, Publisher's Version
Krause, Johannes (2023)
Entwicklung von Tests für die Freigabe des Dynamikmoduls als Teil der Absicherung eines automatisierten Fahrzeugs.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023089
Bachelor Thesis, Primary publication, Publisher's Version
Wartusch, Johanna (2023)
Erstellung einer Übungseinheit zur Anwendung von HEC-RAS 2D.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023162
Master Thesis, Primary publication, Publisher's Version
Rönick, Katharina ; Stockinger, Christopher ; Zöller, Ilka (2023)
Evaluation eines Assistenzsystems zur Messung von Belastung und Beanspruchung am Arbeitsplatz mittels ausgewählter Wearables.
Arbeit interdisziplinär analysieren – bewerten – gestalten. 65. Kongress der Gesellschaft für Arbeitswissenschaft. Dresden (27.02.2019-01.03.2019)
doi: 10.26083/tuprints-00023798
Conference or Workshop Item, Secondary publication, Publisher's Version
Wolff, Michael Wilhelm (2023)
Evaluation of the Magnetic Field Signature as a Potential Parameter for Power Semiconductor Degradation Detection.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023115
Ph.D. Thesis, Primary publication, Publisher's Version
Almoslh, Adel (2023)
Experimental and Numerical Investigation of the Absorption Process in Polygeneration.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023323
Ph.D. Thesis, Primary publication, Publisher's Version
Gholijani, Alireza (2023)
Experimental investigation of fluid dynamics and heat transport during single and multiple drop impingement onto a superheated wall.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023338
Ph.D. Thesis, Primary publication, Publisher's Version
Jasniewicz, Boris ; Adamy, Jürgen (2023)
Fast robust control of linear systems subject to actuator saturation.
In: IFAC Proceedings Volumes, 2008, 41 (2)
doi: 10.26083/tuprints-00023331
Article, Secondary publication, Publisher's Version
Beck, Mark ; Schwung, Andreas ; Münchhof, Marco ; Isermann, Rolf (2023)
Fault-tolerant control of an electro-hydraulic servo axes with a duplex-valve-system.
In: IFAC Proceedings Volumes, 2011, 44 (1)
doi: 10.26083/tuprints-00023319
Article, Secondary publication, Publisher's Version
Wang, Tianbo (2023)
Flexibles Rollsicken - Ein analytisches Modell zur Auslegung faltenfreier Profile mit höhenveränderlichem Querschnitt.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023040
Ph.D. Thesis, Primary publication, Publisher's Version
Liu, Mei-Hua ; Tolle, Henning (2023)
Force-Controlled Robotic Deburring.
In: IFAC Proceedings Volumes, 1993, 26 (2)
doi: 10.26083/tuprints-00023370
Article, Secondary publication, Publisher's Version
Eggert, Julian ; Klingelschmitt, Stefan ; Damerow, Florian (2023)
The Foresighted Driver: Future ADAS Based on Generalized Predictive Risk Estimation.
3rd International Symposium on Future Active Safety Technology Toward Zero Traffic Accidents (FAST-zero'15). Gothenburg, Sweden (09.09.2015-11.09.2015)
doi: 10.26083/tuprints-00023280
Conference or Workshop Item, Secondary publication, Publisher's Version
Brockmann, Philipp Maximilian Josef Hermann (2023)
Fundamental study on 3D particle tracking, flow stability and particle dynamics relevant to Taylor-Couette reactors.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023226
Ph.D. Thesis, Primary publication, Publisher's Version
Homolla, Tobias (2023)
Gekapselte Trajektorienfolgeregelung für autonomes Fahren.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023144
Ph.D. Thesis, Primary publication, Publisher's Version
Abendroth, Bettina ; Müller, Andreas ; Zöller, Ilka ; Ateu, Sena (2023)
Gestensteuerung intuitiv gestalten – Eine Betrachtung ausgewählter Bedienfunktionen im Fahrzeug.
Arbeit interdisziplinär analysieren – bewerten – gestalten. 65. Kongress der Gesellschaft für Arbeitswissenschaft. Dresden (27.02.2019-01.03.2019)
doi: 10.26083/tuprints-00023797
Conference or Workshop Item, Secondary publication, Publisher's Version
Müller, Claudia ; Pipek, Volkmar ; Reuter, Christian (2023)
Globale Infrastruktur - lokales Arbeiten: Praxis IT-gestützter Wartung bei einem Energieversorger.
10. fachübergreifende Konferenz für interaktive und kooperative Medien. Interaktive Kulturen. Duisburg, Germany (12.09.2010-15.09.2010)
doi: 10.26083/tuprints-00020231
Conference or Workshop Item, Secondary publication, Publisher's Version
Zimmermann, Jan ; Tatarenko, Tatiana ; Willert, Volker ; Adamy, Jürgen (2023)
Gradient-Tracking-basierte Lösung von Multi-Cluster-Spielen.
In: at - Automatisierungstechnik, 2021, 70 (4)
doi: 10.26083/tuprints-00023283
Article, Secondary publication, Publisher's Version
Sanjari, Mohammad Shahab (2023)
Hardware and Software Implementation of a Radio Frequency High-Speed Data Conversion Unit for Digital Control Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023078
Bachelor Thesis, Primary publication, Publisher's Version
Knöll, Martin
eds.: Knöll, Martin ; Eckart, Peter ; Lanzendorf, Martin ; Vöckler, Kai (2023)
Healthy Blue Spaces: The Frankfurt Riverfront from a Perspective of Urban Design and Health.
In: Mobility Design, 2021
doi: 10.26083/tuprints-00023340
Book Section, Secondary publication, Publisher's Version
Schäfer, Stefan ; Kieu, Le Thi (2023)
Improvement of the Outdoor Thermal Comfort in Hot Humid Regions: A Case Study at Thu Duc District, Ho Chi Minh City.
International Conference on Environment and Human Health: Challenges and Opportunities in the 21st Century. Hong Kong (18.08.2022-18.08.2022)
doi: 10.26083/tuprints-00023018
Conference or Workshop Item, Primary publication, Publisher's Version
Fritz, Markus (2023)
Industrial excess heat utilisation for residential heating.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023168
Ph.D. Thesis, Primary publication, Publisher's Version
Balduin, Norbert ; Becker, Georg ; Brand, Jürgen ; Görgen, Michael ; Hannappel, Mario ; Hasenfuß, Patrick ; Ley, Benedikt ; Pipek, Volkmar ; Probst, Florian ; Reuter, Christian ; Rose, Thomas ; Rusch, Gebhard ; Wiedenhoefer, Torben ; Zinnen, Andreas (2023)
InfoStrom: Learning information infrastructures for crisis management in case of medium to large electrical power breakdowns.
Future Security - 5th Security Research Conference. Berlin, Germany (07.09.2010-09.09.2010)
doi: 10.26083/tuprints-00022509
Conference or Workshop Item, Secondary publication, Publisher's Version
Gehlen, Stefan ; Tolle, Henning ; Kreuzig, J. ; Friedl, Peter (2023)
Integration of Expert Systems and Neural Networks for the Control of Fermentation Processes.
In: IFAC Proceedings Volumes, 1992, 25 (2)
doi: 10.26083/tuprints-00023386
Article, Secondary publication, Publisher's Version
Kleinmann, Karl ; Hormel, Michael ; Paetsch, Wolfgang (2023)
Intelligent Real-Time Control of a Multifingered Robot Gripper by Learning Incremental Actions.
In: IFAC Proceedings Volumes, 1992, 25 (10)
doi: 10.26083/tuprints-00023371
Article, Secondary publication, Publisher's Version
Fertig, Alexander ; Teige, Christian ; Blech, Heiko ; Schmittberger, Michael ; Wörner, Stefan ; Weisemann, Patrice ; Linner, Ludwig ; Zeitz, Jens ; Huynh, Kim ; Blum, Matthias ; Holl, Anika ; Simnacher, Timo ; Laube, Pascal ; Duck, Michael ; Wilhelm, Matthias (2023)
Intelligente Vernetzung zur autonomen Fräsbearbeitung von Strukturbauteilen - Ergebnisbericht des BMBF Verbundprojektes TensorMill.
doi: 10.26083/tuprints-00023084
Report, Primary publication, Publisher's Version
Roveda, Ilaria (2023)
Investigation of Residual Stress and Microstructure Effects on the Fatigue Behaviour of an Aluminium-Silicon Eutectic Alloy Produced by Laser Powder Bed Fusion.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024400
Ph.D. Thesis, Primary publication, Publisher's Version
Herget, Christian (2023)
Kalksteinmehl als Betonzusatzstoff für umweltfreundliche Betone.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024348
Ph.D. Thesis, Primary publication, Publisher's Version
Schäfer, Stefan ; Bisevac, Nikola
eds.: Schäfer, Stefan ; Institut für Konstruktives Gestalten und Baukonstruktion, Technische Universität Darmstadt (2023)
Konstruktives Gestalten : Wintersemester 2021 / 2022.
doi: 10.26083/tuprints-00023024
Book, Primary publication, Publisher's Version
Märki, Heike ; Abendroth, Bettina (2023)
Konzeption einer Unterstützung für Softwareentwickler im Bereich IT-Sicherheit mit Hilfe mentaler Modelle.
Arbeit interdisziplinär analysieren – bewerten – gestalten. 65. Kongress der Gesellschaft für Arbeitswissenschaft. Dresden (27.02.2019-01.03.2019)
doi: 10.26083/tuprints-00023800
Conference or Workshop Item, Secondary publication, Publisher's Version
Schreck, Sebastian (2023)
Local Energy Markets - Simulative Evaluation and Field Test Application of Energy Markets on Distribution Grid Level.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023674
Ph.D. Thesis, Primary publication, Publisher's Version
Bernstein, Anat ; Studny, Raz ; Shyntychea, Vinolia ; Kurtzman, Daniel ; Ganot, Yonatan ; Katz, Yoram ; Asfaw, Berhane Abrha ; Sakaguchi-Söder, Kaori ; Schüth, Christoph ; Siebner, Hagar (2023)
Low Trihalomethane Formation during Managed Aquifer Recharge with Chlorinated Desalinated Water.
In: Water, 2020, 12 (3)
doi: 10.26083/tuprints-00023028
Article, Secondary publication, Publisher's Version
Johann, Felix (2023)
Magnetic Calibration and GNSS Processing in Strapdown Dynamic Gravimetry.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024342
Ph.D. Thesis, Primary publication, Publisher's Version
Guckes, Lennart (2023)
Magnetically Actuated Hybrid Brake for Autonomous, Electrified Vehicles.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023138
Ph.D. Thesis, Primary publication, Publisher's Version
Wahrburg, Arne ; Listmann, Kim D. ; Adamy, Jürgen (2023)
Master-Slave Synchronization for Nonlinear Systems based on Reduced Observers.
In: IFAC Proceedings Volumes, 2011, 44 (1)
doi: 10.26083/tuprints-00023318
Article, Secondary publication, Publisher's Version
Pelz, Peter F. ; Groche, Peter ; Pfetsch, Marc E. ; Schäffner, Maximilian Frederic (2023)
Mastering Uncertainty in Mechanical Engineering.
doi: 10.26083/tuprints-00023754
Book, Secondary publication, Publisher's Version
Schwarz, Maximilian (2023)
Measurement and Prediction of Oxygen Transfer in Activated Sludge based on Ex Situ Off-gas Monitoring.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023287
Ph.D. Thesis, Primary publication, Publisher's Version
Pandit, Lakshya (2023)
Measuring Multimodal Accessibility through Urban Spatial Configurations Case Studies of three cities in the Rhein-Main Agglomeration.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023637
Ph.D. Thesis, Primary publication, Publisher's Version
Lu, Yemao (2023)
Mechanical Properties and Thermal Stability of Nanocrystalline High-entropy Alloys.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024327
Ph.D. Thesis, Primary publication, Publisher's Version
Schneider, Claus (2023)
Methode zur Analyse der Tropfenpositionierung im Inkjet-Druck.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023438
Ph.D. Thesis, Primary publication, Publisher's Version
Hülsebrock, Moritz (2023)
Methode zur parametrischen globalen Modellordnungsreduktion für eine effiziente Validierung dynamischer Systeme.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022844
Ph.D. Thesis, Primary publication, Publisher's Version
Riemann, Thomas (2023)
Methodik zur kompetenzorientierten Gestaltung und Implementierung von virtuellen Lehr-Lern-Konzepten für Lernfabriken.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024204
Ph.D. Thesis, Primary publication, Publisher's Version
Glatzki, Felix Fabian (2023)
Methodology for Specifying and Testing Traffic Rule Compliance for Automated Driving.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023569
Ph.D. Thesis, Primary publication, Publisher's Version
Marenbach, Peter ; Bettenhausen, Kurt Dirk ; Tolle, Henning (2023)
Methods for a Transparent Development and Optimization of Biotechnological Processes.
In: IFAC Proceedings Volumes, 1996, 29 (1)
doi: 10.26083/tuprints-00023336
Article, Secondary publication, Publisher's Version
Sos, Marcel ; Meyer, Guillaume ; Durst, Karsten ; Mittelstedt, Christian ; Bruder, Enrico (2023)
Microstructure and mechanical properties of additively manufactured AlSi10Mg lattice structures from single contour exposure.
In: Materials & Design, 2023, 227
doi: 10.26083/tuprints-00023401
Article, Secondary publication, Publisher's Version
Luo, Yujuan (2023)
Modeling and simulation of near-wall combustion of renewable fuels.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023365
Ph.D. Thesis, Primary publication, Publisher's Version
Harzheim, Jens ; Domont-Yankulova, Dilyana ; Königstein, Robert ; Klingbeil, Harald ; Frey, Michael ; Hülsmann, Peter (2023)
Modeling of broadband cavities in PSpice.
doi: 10.26083/tuprints-00023267
Report, Secondary publication, Publisher's Version
Hu, Chengliang ; Volz, Stefan ; Groche, Peter ; Moreau, Philippe ; Launhardt, Jonas ; Benabbou, N. ; Saito, S. ; Chen, H. ; Kitamura, Kazuhiko ; Dubar, Laurent (2023)
Modeling of friction in cold forging considering a wide range of tribological conditions.
ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022. Mailand, Italien (11.09.2022-14.09.2022)
doi: 10.26083/tuprints-00023238
Conference or Workshop Item, Secondary publication, Publisher's Version
Meier, Vinzent (2023)
Modellierung und Berechnung der Strömungsvorgänge im Luftspalt einer permanentmagneterregten Synchronmaschine.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024381
Ph.D. Thesis, Primary publication, Publisher's Version
Tsakmakis, Aris (2023)
Modelling of crack propagation in ductile materials.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023111
Ph.D. Thesis, Primary publication, Publisher's Version
Chilakalapudi, Syamal Praneeth (2023)
Molecular Dynamics Simulations of Cluster-assembled Metallic Glasses.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024088
Ph.D. Thesis, Primary publication, Publisher's Version
Stanula, Patrick (2023)
Monetäre Bewertung des belastungsbasierten Leasings für Werkzeugmaschinen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023375
Ph.D. Thesis, Primary publication, Publisher's Version
Logan, Kevin ; Stürmer, Marius ; Müller, Tim ; Meck, Tobias ; Pelz, Peter F. (2023)
Multi-Agent Control of Fluid Systems – Comparison of Approaches.
DeSIRE Conference 2022. Delft, Netherlands (03.11.2022-04.11.2022)
doi: 10.26083/tuprints-00023195
Conference or Workshop Item, Secondary publication, Publisher's Version
Rathgeber, K. ; Schnell, Michael (2023)
Multi-Microcomputer Robot Control System Using a Special Robot-Arithmetic-Processor for Advanced Applications of Robot Manipulators.
In: IFAC Proceedings Volumes, 1986, 20 (4)
doi: 10.26083/tuprints-00023394
Article, Secondary publication, Publisher's Version
Wilke, Kim (2023)
Nachfragebeeinflussung im Schienenpersonenverkehr in Störfallsituationen - Entwicklung einer Methodik zur Modellierung des Entscheidungsverhaltens von Reisenden.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023110
Ph.D. Thesis, Primary publication, Publisher's Version
Peyyety, Naga Anirudh (2023)
Near-infrared photodetection in nanocarbon materials.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022990
Ph.D. Thesis, Primary publication, Publisher's Version
Müller, Andreas ; Abendroth, Bettina (2023)
Nebentätigkeiten bei automatisierter Fahrt? – Analyse bisheriger Tätigkeitskataloge.
Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft - 63. Kongress der Gesellschaft für Arbeitswissenschaft. Brugg, Switzerland (15.02.2017-17.02.2017)
doi: 10.26083/tuprints-00023778
Conference or Workshop Item, Secondary publication, Publisher's Version
Ersü, Enis ; Tolle, Henning (2023)
A New Concept for Learning Control Inspired by Brain Theory.
In: IFAC Proceedings Volumes, 1984, 17 (2)
doi: 10.26083/tuprints-00023398
Article, Secondary publication, Publisher's Version
Sanjari, Mohammad Shahab (2023)
Novel Diode Structures Based on Polar and Non-polar III-Nitride Semiconductors.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023080
Master Thesis, Primary publication, Publisher's Version
Lens, Hendrik ; Adamy, Jürgen (2023)
Observer Based Controller Design for Linear Systems with Input Constraints.
In: IFAC Proceedings Volumes, 2008, 41 (2)
doi: 10.26083/tuprints-00023332
Article, Secondary publication, Publisher's Version
Tolle, Henning ; Ersü, Enis (2023)
On Experiences with a Seminar for Teaching Robotics.
In: IFAC Proceedings Volumes, 1988, 21 (6)
doi: 10.26083/tuprints-00023389
Article, Secondary publication, Publisher's Version
Ersü, Enis ; Kegel, Gunther (2023)
Optical Proximity Sensor Systems for Intelligent Robot Hands.
In: IFAC Proceedings Volumes, 1986, 20 (4)
doi: 10.26083/tuprints-00023392
Article, Secondary publication, Publisher's Version
Jurisch, Matthias (2023)
Optimale Aufbaubewegung für hochautomatisiertes Fahren.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022919
Ph.D. Thesis, Primary publication, Publisher's Version
Erkan, Anil (2023)
Optimierung von Frontscheinwerferlichtverteilungen anhand wahrnehmungsphysiologischer Kriterien.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023805
Ph.D. Thesis, Primary publication, Publisher's Version
Fuller, Morris (2023)
Optimized Operation of Interleaved Motor Drive Inverter by means of Model Predictive Control.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023575
Ph.D. Thesis, Primary publication, Publisher's Version
Behnisch, Justus (2023)
Oxygen transfer of fine-bubble aeration systems in wastewater treatment: Influence of diffuser design on oxygen transfer at increased salt concentrations.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022940
Ph.D. Thesis, Primary publication, Publisher's Version
Pelz, Peter F. (2023)
PKW Federung und Dämpfung – Übersicht, Trends, Zukunft.
Institution: Universitäts- und Landesbibliothek Darmstadt, 2010
Event: 3. Fachtagung Federungs- und Dämpfungssysteme im Fahrwerk. (06.05.2010-06.05.2010)
doi: 10.26083/tuprints-00023192
Lecture, Secondary publication, Publisher's Version
Barakat Mosaad, Ahmed AbdelMonem (2023)
Parametric Excitation of Coupled Nonlinear Microelectromechanical Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023198
Ph.D. Thesis, Primary publication, Publisher's Version
Tatarenko, Tatiana ; Kamgarpour, Maryam (2023)
Payoff-Based Approach to Learning Nash Equilibria in Convex Games.
In: IFAC-PapersOnLine, 2017, 50 (1)
doi: 10.26083/tuprints-00023284
Article, Secondary publication, Publisher's Version
Joisten, Philip ; Theobald, Nina ; Abendroth, Bettina (2023)
Pedestrians’ Crossing Decisions While Interacting with Automated Vehicles – Insights from a Longitudinal Study.
New York (24.07.2022-28.07.2022)
doi: 10.26083/tuprints-00023817
Conference or Workshop Item, Secondary publication, Publisher's Version
Krause, Benedikt Leander ; Mukherjee, Amlan kusum ; Preu, Sascha (2023)
A Photonic Spectrum Analyzer for Waveguide-Coupled Sources in the Terahertz Range.
In: IEEE Journal of Selected Topics in Quantum Electronics, 2023, 29 (5)
doi: 10.26083/tuprints-00023243
Article, Secondary publication, Publisher's Version
Grube Doiz, Nerea (2023)
Potenzialanalyse der Modularisierung in der Automobilindustrie für die Freigabe automatisierter Fahrzeuge.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022921
Bachelor Thesis, Primary publication, Publisher's Version
Le, Thi Thuy Hang (2023)
Public open spaces for the elderly in urban areas. A case study of Ho Chi Minh City, Vietnam.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023114
Ph.D. Thesis, Primary publication, Publisher's Version
D'Angelo, Laura Anna Maria (2023)
Quasi-3D Quench Simulation for Superconducting Accelerator Magnets.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023131
Ph.D. Thesis, Primary publication, Publisher's Version
Wohninsland, Andreas (2023)
Quenching-Induced Changes in the Structural and Electrical Properties of Lead-Free Ferroelectric Ceramics.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024364
Ph.D. Thesis, Primary publication, Publisher's Version
Simon, Wolfgang ; Ersü, Enis ; Gose, H. ; Zoll, M. (2023)
A Real-Time Knowledge Scheme for Sensory-Controlled Robot Assembly Tasks.
In: IFAC Proceedings Volumes, 1988, 21 (16)
doi: 10.26083/tuprints-00023390
Article, Secondary publication, Publisher's Version
Schäfer, Stefan ; Bisevac, Nikola (2023)
The Resilience of Structures in Times of Climate Change and its Implications for Human Safety.
International Conference on Environment and Human Health: Challenges and Opportunities in the 21st Century. Hong Kong (18.08.2022-18.08.2022)
doi: 10.26083/tuprints-00023013
Conference or Workshop Item, Primary publication, Publisher's Version
Schäfer, Stefan ; Bisevac, Nikola (2023)
The Resilience of Structures in Times of Climate Change.
International Conference on Sustainable Urban Development. Ho Chi Minh City (20.10.2022-20.10.2022)
doi: 10.26083/tuprints-00023020
Conference or Workshop Item, Primary publication, Postprint
Ersü, Enis ; Rathgeber, K. ; Schnell, Michael ; Neddermeyer, Werner (2023)
A Robot Arithmetic Processor Concept for Cartesian Closed-Loop Control with Prescribed Dynamics.
In: IFAC Proceedings Volumes, 1985, 18 (16)
doi: 10.26083/tuprints-00023396
Article, Secondary publication, Publisher's Version
Wahrburg, Arne ; Adamy, Jürgen (2023)
Robust fault isolation observers for non-square systems - a parametric approach.
In: IFAC Proceedings Volumes, 2012, 45 (20)
doi: 10.26083/tuprints-00023315
Article, Secondary publication, Publisher's Version
Wahrburg, Arne ; Khodaverdian, Saman ; Adamy, Jürgen (2023)
Robust observer-based fault detection and isolation in the standard control problem framework.
In: IFAC Proceedings Volumes, 2012, 45 (13)
doi: 10.26083/tuprints-00023316
Article, Secondary publication, Publisher's Version
Hoßfeld, Alexander (2023)
Robuste Drehwinkelmessung mechanisch kommutierter Gleichstrommaschinen anhand von Oszillationen elektrischer Messgrößen am Beispiel einer sattelintegrierten elektrischen Parkbremse.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023764
Ph.D. Thesis, Primary publication, Publisher's Version
Khodaverdian, Saman ; Lanfermann, Felix ; Adamy, Jürgen (2023)
Root Locus Design for the Synchronization of Multi-Agent Systems in General Directed Networks.
In: IFAC-PapersOnLine, 2015, 48 (22)
doi: 10.26083/tuprints-00023291
Article, Secondary publication, Publisher's Version
Ackermann, Stefan Martin (2023)
Safe Halt as Fail-safe Concept for Automated Driving Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024192
Ph.D. Thesis, Primary publication, Publisher's Version
Schaub, Karlheinz ; Abendroth, Bettina (2023)
Schnittstelle Mensch-Fahrzeug: Forschung an der TUD.
In: Technik & Mensch, 2003, 2003 (2)
doi: 10.26083/tuprints-00023842
Article, Secondary publication, Publisher's Version
Yadegari, Patrick (2023)
Schwingfestigkeit randschichtverfestigter Bauteile und höchstfester Stähle.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024260
Ph.D. Thesis, Primary publication, Publisher's Version
Gräser, Axel ; Neddermeyer, Werner (2023)
Self-Tuning Cross Profile Control for a Paper Machine.
In: IFAC Proceedings Volumes, 1986, 20 (4)
doi: 10.26083/tuprints-00023391
Article, Secondary publication, Publisher's Version
Müller, Fabian (2023)
Severity Estimation for Risk-based Motion Planning.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023325
Ph.D. Thesis, Primary publication, Publisher's Version
Popp, Christoph (2023)
Simultaner Safety-Check von Trajektorien beim Automatisierten Fahren im Urbanen Verkehr.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023223
Ph.D. Thesis, Primary publication, Publisher's Version
Li, Wei (2023)
Single-source-precursor derived additive-free bulk SiHf(B)N ceramics with excellent mechanical properties and oxidation resistance.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023302
Ph.D. Thesis, Primary publication, Publisher's Version
Schneider, Moritz ; Adamy, Jürgen (2023)
Singleton-Based Two-String Inference in Recurrent Fuzzy Systems.
In: IFAC Proceedings Volumes, 2014, 47 (3)
doi: 10.26083/tuprints-00023293
Article, Secondary publication, Publisher's Version
Gering, Stefan ; Willert, Volker (2023)
Solving the N-Consensus Problem: Combining Clustering and Synchronization.
In: IFAC Proceedings Volumes, 2012, 45 (26)
doi: 10.26083/tuprints-00023317
Article, Secondary publication, Publisher's Version
Gering, Stefan ; Adamy, Jürgen (2023)
Stabilization of Recurrent Fuzzy Systems via Sum of Squares-based Hybrid Control.
In: IFAC Proceedings Volumes, 2014, 47 (3)
doi: 10.26083/tuprints-00023292
Article, Secondary publication, Publisher's Version
Frey, Michael ; Hülsmann, Peter ; Michler, Fabian ; Klingbeil, Harald ; Domont-Yankulova, Dilyana ; Groß, Kerstin ; Harzheim, Jens (2023)
Status of the Barrier-Bucket system for the ESR.
doi: 10.26083/tuprints-00023268
Report, Secondary publication, Publisher's Version
Vogel, Tobias (2023)
Switching in Emerging Memories and their Response to Heavy Ion Irradiation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023263
Ph.D. Thesis, Primary publication, Publisher's Version
Gebler, Tim (2023)
Symmetry-based stability theory in fluid mechanics.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023780
Ph.D. Thesis, Primary publication, Publisher's Version
Khodaverdian, Saman ; Adamy, Jürgen (2023)
Synchronizing Linear Heterogeneous Networks by Output Homogenization.
In: IFAC Proceedings Volumes, 2014, 47 (3)
doi: 10.26083/tuprints-00023294
Article, Secondary publication, Publisher's Version
Adolphs, Peter ; Matthiesen, Jan (2023)
Task-Level Programming with Collision Avoidance for Autonomous Space Robots.
In: IFAC Proceedings Volumes, 1992, 25 (22)
doi: 10.26083/tuprints-00023385
Article, Secondary publication, Publisher's Version
Matthiesen, Jan (2023)
Topological Task Space Modelling for Autonomous Space Robot Action Planning.
In: IFAC Proceedings Volumes, 1994, 27 (13)
doi: 10.26083/tuprints-00023368
Article, Secondary publication, Publisher's Version
Wichert, Georg von ; Tolle, Henning (2023)
Towards Constructing and Using Selforganizing Visual Environment Representations for Mobile Robots.
In: IFAC Proceedings Volumes, 1998, 31 (3)
doi: 10.26083/tuprints-00023333
Article, Secondary publication, Publisher's Version
Habes, Constantin (2023)
Towards a unified multiphysics framework applied to reactive bubbly flows.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023030
Master Thesis, Primary publication, Publisher's Version
Ziegler, Christoph (2023)
Trajektorienplanung autonomer Fahrzeuge: Diskrete Lösungsmethode für urbane Szenarien.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023146
Ph.D. Thesis, Primary publication, Publisher's Version
Gack, Nicolas Sebastian (2023)
Transport Properties and Magnetoresistance of Cluster-Assembled Fe-Ge and Fe-Ag Nanocomposites.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023564
Ph.D. Thesis, Primary publication, Publisher's Version
Maier, Andreas (2023)
Ultraleichter, zementgebundener Schaum als Kernwerkstoff von Sandwichelementen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023247
Ph.D. Thesis, Primary publication, Publisher's Version
Li, Yongxiang (2023)
A Universal Wall-Modeling Approach for Large-Eddy Simulations of Complex Turbulent Flows with Heat Transfer.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024179
Ph.D. Thesis, Primary publication, Publisher's Version
Joisten, Philip (2023)
Untersuchungen zu Verhaltensanpassungen von zu Fuß Gehenden bei der Interaktion mit hochautomatisierten Pkw.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024048
Ph.D. Thesis, Primary publication, Publisher's Version
Kraemer, Anna-Katharina (2023)
Untersuchungen zu den Auswirkungen einer Feuerverzinkung auf die Ermüdungsfestigkeit von Bauteilen aus Stahl.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024073
Ph.D. Thesis, Primary publication, Publisher's Version
Leštáková, Michaela ; Hessel, Frank ; Logan, Kevin ; Alhamwy, Yasin ; Morgen, Andreas ; Pietsch, Martin (2023)
Urban Data Platforms and Urban Critical Infrastructure.
DeSIRE Conference 2022. Delft, Netherlands (03.11.2022-04.11.2022)
doi: 10.26083/tuprints-00023196
Conference or Workshop Item, Secondary publication, Publisher's Version
Puff, Matthias ; Pelz, Peter F. (2023)
Verbesserung der Fahrdynamik durch geregelte Luftfederdämpfer unter Beachtung von Sicherheit und Komfort.
Institution: Universitäts- und Landesbibliothek Darmstadt, 2010
Event: 3. Fachtagung Federungs- und Dämpfungssysteme im Fahrwerk. (06.05.2010-06.05.2010)
doi: 10.26083/tuprints-00023193
Lecture, Secondary publication, Publisher's Version
Saçıak, Andreas (2023)
Verfahren zur Berechnung unbeeinflusster Kurzschlussströme in vermaschten HGÜ-Netzen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023633
Ph.D. Thesis, Primary publication, Publisher's Version
Weigl, Alexandra ; Seitz, Matthias (2023)
Vision assisted disassembly using a dexterous hand-arm-system: An example and experimental results.
In: IFAC Proceedings Volumes, 1994, 27 (14)
doi: 10.26083/tuprints-00023359
Article, Secondary publication, Publisher's Version
Pelz, Peter F. (2023)
Was ist Qualität? - Diskurs anlässlich 125 Jahre Fluidsystemtechnik an der Technischen Universität Darmstadt am 7. Oktober 2022.
doi: 10.26083/tuprints-00023769
Report, Primary publication, Publisher's Version
Mukherjee, Amlan kusum (2023)
Waveguide Architecture and Components for Photonic Vector Network Analysers.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023364
Ph.D. Thesis, Primary publication, Publisher's Version
Rosemeyer, Jannik ; Metternich, Joachim (2023)
Weiterbildung und Wertschöpfung an einem Ort: Neues betriebliches Lernen für KI-Anwendungen in der Produktion.
doi: 10.26083/tuprints-00023273
Report, Primary publication, Publisher's Version
Nguyen, Anh Duc (2023)
Weiterentwicklung der zerstörungsfreien Bewertung struktureller Substanz von Asphaltschichten mit dem Falling Weight Deflectometer.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023373
Ph.D. Thesis, Primary publication, Publisher's Version
Hauer, Lukas (2023)
Wetting Mechanisms on Silicone Surfaces with Liquid, Frozen, and Vaporous Water.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023783
Ph.D. Thesis, Primary publication, Publisher's Version
Adelea, Ashleika (2023)
A Work Process Analysis for Office Facility Management Standards in Upstream Oil and Gas Sector Republic of Indonesia.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00021950
Ph.D. Thesis, Primary publication, Publisher's Version
Geilen, Max Benedikt (2023)
Zum Verhalten eigenspannungsbehafteter, biegebeanspruchter Federelemente unter einmaliger und zyklischer Belastung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023135
Ph.D. Thesis, Primary publication, Publisher's Version
Händler, Pascal (2023)
Zur Anwendung der SPS-Technologie im Bahnbrückenbau.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024143
Ph.D. Thesis, Primary publication, Publisher's Version
Abendroth, Bettina ; Zöller, Ilka ; Quast, Christopher ; Balzer, Mitja ; König, Christina (2023)
Zur Vision des Fahrerplatzes der Zukunft - Ergebnisse einer Befragung.
VerANTWORTung für die Arbeit der Zukunft - 61. Kongress der Gesellschaft für Arbeitswissenschaft. Karlsruhe (25.02.2015-27.02.2015)
doi: 10.26083/tuprints-00023773
Conference or Workshop Item, Secondary publication, Publisher's Version
Schäffner, Marten (2023)
Zustandsüberwachung von Getrieben durch Nutzung eines Zahnrads als Maßverkörperung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023668
Master Thesis, Primary publication, Publisher's Version
Stein, Thomas (2023)
Übertragungstechnologien, Simulation und Entwurf robuster Regelungen für drahtlose Feldgeräte in der Industrie.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023041
Ph.D. Thesis, Primary publication, Publisher's Version
Fernandez Olvera, Anuar De Jesus ; Krause, Benedikt Leander ; Betancur-Perez, Andrés F. ; De Dios, Cristina ; Acedo, Pablo ; Preu, Sascha (2023)
An ultra-high-resolution technique for detection of terahertz pulses.
47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). Delft, Netherlands (28.08.2022-02.09.2022)
doi: 10.26083/tuprints-00023086
Conference or Workshop Item, Secondary publication, Postprint
Tolle, Tobias (2023)
An unstructured Finite-Volume Level Set / Front Tracking method for capillary flows.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023366
Ph.D. Thesis, Primary publication, Publisher's Version
2022
Franz, Daniel ; Jungblut, Jens ; Rinderknecht, Stephan (2022)
Controller parameterization and bias current reduction of active magnetic bearings for a flexible and gyroscopic spindle.
In: Advanced Control for Applications: Engineering and Industrial Systems, 2022, 4 (3)
doi: 10.26083/tuprints-00022893
Article, Secondary publication, Publisher's Version
Toutaoui, Jonas ; Benlian, Alexander ; Hess, Thomas (2022)
Managing paradoxes in bi‐modal information technology functions: A multi‐case study.
In: Information Systems Journal, 2022, 32 (6)
doi: 10.26083/tuprints-00022895
Article, Secondary publication, Publisher's Version
Bagheri, Milad ; Stumpf, Bastian ; Roisman, Ilia V. ; Dadvand, Abdolrahman ; Wörner, Martin ; Marschall, Holger (2022)
A unified finite volume framework for phase‐field simulations of an arbitrary number of fluid phases.
In: The Canadian Journal of Chemical Engineering, 2022, 100 (9)
doi: 10.26083/tuprints-00022441
Article, Secondary publication, Publisher's Version
Xia, Lili ; Sakaguchi‐Söder, Kaori ; Stanojkovski, Daniel ; Schebek, Liselotte (2022)
Evaluation of a quick one‐step sample preparation method for the determination of the isotopic fingerprint of rapeseed (Brassica napus): Investigation of the influence of the use of 2,2‐dimethoxypropane on compound‐specific stable carbon and hydrogen isotope analyses by gas chromatography combustion/pyrolysis isotope ratio mass spectrometry.
In: Rapid Communications in Mass Spectrometry, 2021, 35 (9)
doi: 10.26083/tuprints-00023026
Article, Secondary publication, Publisher's Version
Asfaw, Berhane Abrha ; Sakaguchi‐Söder, Kaori ; Bernstein, Anat ; Siebner, Hagar ; Schüth, Christoph (2022)
Optimization of compound‐specific chlorine stable isotope analysis of chloroform using the Taguchi design of experiments.
In: Rapid Communications in Mass Spectrometry, 2020, 34 (23)
doi: 10.26083/tuprints-00023027
Article, Secondary publication, Publisher's Version
Jardin, Philippe ; Moisidis, Ioannis ; Kartal, Kürsat ; Rinderknecht, Stephan (2022)
Adaptive Driving Style Classification through Transfer Learning with Synthetic Oversampling.
In: Vehicles, 2022, 4 (4)
doi: 10.26083/tuprints-00022978
Article, Secondary publication, Publisher's Version
Aguirre, Fernando Leonel ; Piros, Eszter ; Kaiser, Nico ; Vogel, Tobias ; Petzold, Stephan ; Gehrunger, Jonas ; Oster, Timo ; Hochberger, Christian ; Suñé, Jordi ; Alff, Lambert ; Miranda, Enrique (2022)
Fast Fitting of the Dynamic Memdiode Model to the Conduction Characteristics of RRAM Devices Using Convolutional Neural Networks.
In: Micromachines, 2022, 13 (11)
doi: 10.26083/tuprints-00022979
Article, Secondary publication, Publisher's Version
Oltmanns, Johannes Julius ; Freystein, Martin ; Dammel, Frank ; Stephan, Peter (2022)
Improving the operation of a district heating and a district cooling network.
In: Energy Procedia, 2018, 149
doi: 10.26083/tuprints-00023021
Article, Secondary publication, Publisher's Version
Awandu, Willis ; Ruff, Robin ; Wiesemann, Jens-Uwe ; Lehmann, Boris (2022)
Status of Micro-Hydrokinetic River Technology Turbines Application for Rural Electrification in Africa.
In: Energies, 2022, 15 (23)
doi: 10.26083/tuprints-00022967
Article, Secondary publication, Publisher's Version
Berger, Felix ; Bogner, Andreas ; Hirsch, Astrid ; Ukrainczyk, Neven ; Dehn, Frank ; Koenders, Eduardus (2022)
Thermodynamic Modeling and Experimental Validation of Acetic Acid Attack on Hardened Cement Paste: Effect of Silica Fume.
In: Materials, 2022, 15 (23)
doi: 10.26083/tuprints-00022970
Article, Secondary publication, Publisher's Version
Lorenzen, Steven Robert ; Riedel, Henrik ; Rupp, Maximilian Michael ; Schmeiser, Leon ; Berthold, Hagen ; Firus, Andrei ; Schneider, Jens (2022)
Virtual Axle Detector Based on Analysis of Bridge Acceleration Measurements by Fully Convolutional Network.
In: Sensors, 2022, 22 (22)
doi: 10.26083/tuprints-00022977
Article, Secondary publication, Publisher's Version
Tamborini, Marco ; Datteri, Edoardo (2022)
Is biorobotics science? Some theoretical reflections.
In: Bioinspiration & Biomimetics, 2022, 18 (1)
doi: 10.26083/tuprints-00022943
Article, Secondary publication, Publisher's Version
Scheibel, Franziska ; Lauhoff, Christian ; Riegg, Stefan ; Krooß, Philipp ; Bruder, Enrico ; Adabifiroozjaei, Esmaeil ; Molina-Luna, Leopoldo ; Böhm, Stefan ; Chumlyakov, Yury I. ; Niendorf, Thomas ; Gutfleisch, Oliver (2022)
On the Impact of Additive Manufacturing Processes on the Microstructure and Magnetic Properties of Co–Ni–Ga Shape Memory Heusler Alloys.
In: Advanced Engineering Materials, 2022, 24 (10)
doi: 10.26083/tuprints-00022901
Article, Secondary publication, Publisher's Version
Niedermayer, Uwe (2022)
Electron Beam Dynamics in Dielectric Laser Accelerators.
Universitäts- und Landesbibliothek Darmstadt, 2022
doi: 10.26083/tuprints-00022846
Habilitation, Secondary publication, Publisher's Version
Klingenberg, Dario ; Oberlack, Martin ; Plümacher, Dominik (2022)
Symmetries and turbulence modeling.
In: Physics of Fluids, 2020, 32
doi: 10.26083/tuprints-00011507
Article, Secondary publication, Publisher's Version
Razavi, Atieh ; Rutsch, Matthias ; Wismath, Sonja ; Kupnik, Mario ; Klitzing, Regine von ; Rahimzadeh, Amin (2022)
Frequency-Dependent Ultrasonic Stimulation of Poly(N-isopropylacrylamide) Microgels in Water.
In: Gels, 2022, 8 (10)
doi: 10.26083/tuprints-00022833
Article, Secondary publication, Publisher's Version
Iranmanesh, Reza ; Pourahmad, Afham ; Faress, Fardad ; Tutunchian, Sevil ; Ariana, Mohammad Amin ; Sadeqi, Hamed ; Hosseini, Saleh ; Alobaid, Falah ; Aghel, Babak (2022)
Introducing a Linear Empirical Correlation for Predicting the Mass Heat Capacity of Biomaterials.
In: Molecules, 2022, 27 (19)
doi: 10.26083/tuprints-00022842
Article, Secondary publication, Publisher's Version
Römisch, David ; Zirngibl, Christoph ; Schleich, Benjamin ; Wartzack, Sandro ; Merklein, Marion (2022)
Robustness Analysis of Pin Joining.
In: Journal of Manufacturing and Materials Processing, 2022, 6 (5)
doi: 10.26083/tuprints-00022836
Article, Secondary publication, Publisher's Version
Dowlati, Saeid ; Javadi, Aliyar ; Miller, Reinhard ; Eckert, Kerstin ; Kraume, Matthias (2022)
Unfolded Lipase at Interfaces Studied via Interfacial Dilational Rheology: The Impact of Urea.
In: Colloids and Interfaces, 2022, 6 (4)
doi: 10.26083/tuprints-00022835
Article, Secondary publication, Publisher's Version
Laib, Magdalena ; Haspel, Christina ; Stockinger, Christopher ; Polanski-Schräder, Lucas ; Dücker, Philipp ; Voll, Kristian ; Schiffrer, Patrizia ; Burmester, Michael (2022)
Wellbeing at Work — Emotional Impact on Workers Using a Worker Guidance System Designed for Positive User Experience.
In: Multimodal Technologies and Interaction, 2022, 6 (10)
doi: 10.26083/tuprints-00022838
Article, Secondary publication, Publisher's Version
Schmiedt, Marius ; He, Ping ; Rinderknecht, Stephan (2022)
Target State Optimization: Drivability Improvement for Vehicles with Dual Clutch Transmissions.
In: Applied Sciences, 2022, 12 (20)
doi: 10.26083/tuprints-00022832
Article, Secondary publication, Publisher's Version
Hünemohr, David ; Litzba, Jörg ; Rahimi, Farid (2022)
Usage Monitoring of Helicopter Gearboxes with ADS-B Flight Data.
In: Aerospace, 2022, 9 (11)
doi: 10.26083/tuprints-00022831
Article, Secondary publication, Publisher's Version
Schebek, Liselotte ; Lützkendorf, Thomas (2022)
Assessing Resource Efficiency of City Neighbourhoods: A Methodological Framework for Structuring and Practical Application of Indicators in Urban Planning.
In: Sustainability, 2022, 14 (13)
doi: 10.26083/tuprints-00021639
Article, Secondary publication, Publisher's Version
Wilhelm, Alexander ; Agrawal, Shelesh ; Schoth, Jens ; Meinert-Berning, Christina ; Bastian, Daniel ; Orschler, Laura ; Ciesek, Sandra ; Teichgräber, Burkhard ; Wintgens, Thomas ; Lackner, Susanne ; Weber, Frank-Andreas ; Widera, Marek (2022)
Early Detection of SARS-CoV-2 Omicron BA.4 and BA.5 in German Wastewater.
In: Viruses, 2022, 14 (9)
doi: 10.26083/tuprints-00022326
Article, Secondary publication, Publisher's Version
Qin, Zhenzhen ; Zhang, Hongbin ; Qin, Guangzhao (2022)
Editorial: A Brief Perspective to the Development of Emerging Thermoelectric Materials.
In: Frontiers in Materials, 2022, 9
doi: 10.26083/tuprints-00021048
Article, Secondary publication, Publisher's Version
Grimmer, Martin ; Zeiss, Julian ; Weigand, Florian ; Zhao, Guoping (2022)
Exploring surface electromyography (EMG) as a feedback variable for the human-in-the-loop optimization of lower limb wearable robotics.
In: Frontiers in Neurorobotics, 2022, 16
doi: 10.26083/tuprints-00022549
Article, Secondary publication, Publisher's Version
Kruppert, Sebastian ; Horstmann, Martin ; Weiss, Linda C. ; Konopka, Elena ; Kubitza, Nadja ; Poppinga, Simon ; Westermeier, Anna S. ; Speck, Thomas ; Tollrian, Ralph (2022)
Facing the Green Threat: A Water Flea’s Defenses against a Carnivorous Plant.
In: International Journal of Molecular Sciences, 2022, 23 (12)
doi: 10.26083/tuprints-00022188
Article, Secondary publication, Publisher's Version
Dressler, Louis ; Nicolai, Hendrik ; Agrebi, Senda ; Ries, Florian ; Sadiki, Amsini (2022)
Computation of Entropy Production in Stratified Flames Based on Chemistry Tabulation and an Eulerian Transported Probability Density Function Approach.
In: Entropy, 2022, 24 (5)
doi: 10.26083/tuprints-00022558
Article, Secondary publication, Publisher's Version
Jungblut, Jens (2022)
Aktives Auswuchten elastischer Rotoren für industrielle Anwendung.
doi: 10.26083/tuprints-00022492
Book, Primary publication, Publisher's Version
Weirich, Christopher ; Lin, Yandan ; Khanh, Tran Quoc (2022)
Evidence for human-centric in-vehicle lighting: Part 2 — Modeling illumination based on color-opponents.
In: Frontiers in Neuroscience, 2022, 16
doi: 10.26083/tuprints-00022498
Article, Secondary publication, Publisher's Version
Volz, Lennart ; Sheng, Yinxiangzi ; Durante, Marco ; Graeff, Christian (2022)
Considerations for Upright Particle Therapy Patient Positioning and Associated Image Guidance.
In: Frontiers in Oncology, 2022, 12
doi: 10.26083/tuprints-00022017
Article, Secondary publication, Publisher's Version
Alobaid, Falah ; Kuhn, Alexander ; Nguyen, Nhut M. ; Johnen, Balte ; Peters, Jens ; Epple, Bernd (2022)
Numerical and experimental study of co-combustion of refuse-derived fuels in a circulating fluidized bed during load change.
In: Frontiers in Energy Research, 2022, 10
doi: 10.26083/tuprints-00022529
Article, Secondary publication, Publisher's Version
Hatzissawidis, Grigorios ; Kerres, Lara ; Ludwig, Gerhard J. ; Pelz, Peter F. (2022)
Spatiotemporal analysis of sheet and cloud cavitation and its damage potential.
In: IOP Conference Series: Earth and Environmental Science, 2022, 1079
doi: 10.26083/tuprints-00022519
Article, Secondary publication, Publisher's Version
Ferreira, Saulo Rocha ; Andrade, Rodolfo Giacomim Mendes de ; Andrade, Gabriele Melo de ; Araújo, Olga Maria Oliveira de ; Lopes, Ricardo Tadeu ; Fairbairn, Eduardo de Moraes Rego ; Grabois, Thiago Melo ; Ukrainczyk, Neven (2022)
Bond Behavior of a Bio-Aggregate Embedded in Cement-Based Matrix.
In: Materials, 2022, 15 (17)
doi: 10.26083/tuprints-00022481
Article, Secondary publication, Publisher's Version
Mosbach, Julian ; Krämer, Moritz ; Fiedler, Justus Ernst ; Sonnenburg, Alexander ; Urban, Wilhelm (2022)
Combined Districting and Main Line Routing — A Method to Implement a Basic Drinking Water Supply Infrastructure in Informal Settlements.
In: Water, 2022, 14 (18)
doi: 10.26083/tuprints-00022485
Article, Secondary publication, Publisher's Version
Schuster, Miriam ; Schneider, Jens (2022)
Linear viskoelastisches Materialverhalten teilkristalliner Zwischenschichten.
In: ce/papers, 2022, 5 (1)
doi: 10.26083/tuprints-00022439
Article, Secondary publication, Publisher's Version
Hallas, Martin ; Tenzer, Michael ; Neumann, Claus ; Hinrichsen, Volker ; Gross, Detlev (2022)
Nachweis der Betriebstauglichkeit von gasisolierten HVDC Systemen unter betriebsnahen Bedingungen - Resümee einer Langzeituntersuchung in Griesheim.
24. Fachtagung Hochspannungsschaltanlagen: Anwendungen, Betrieb und Erfahrungen. GIS-Anwendungsforum. Darmstadt, Germany (27.09.2022-27.09.2022)
doi: 10.26083/tuprints-00022488
Conference or Workshop Item, Secondary publication, Publisher's Version
Durak, Grażyna M. ; Thierer, Rebecca ; Sachse, Renate ; Bischoff, Manfred ; Speck, Thomas ; Poppinga, Simon (2022)
Smooth or with a Snap! Biomechanics of Trap Reopening in the Venus Flytrap (Dionaea muscipula).
In: Advanced Science, 2022, 9 (22)
doi: 10.26083/tuprints-00022437
Article, Secondary publication, Publisher's Version
Eger, Carmen J. ; Horstmann, Martin ; Poppinga, Simon ; Sachse, Renate ; Thierer, Rebecca ; Nestle, Nikolaus ; Bruchmann, Bernd ; Speck, Thomas ; Bischoff, Manfred ; Rühe, Jürgen (2022)
The Structural and Mechanical Basis for Passive‐Hydraulic Pine Cone Actuation.
In: Advanced Science, 2022, 9 (20)
doi: 10.26083/tuprints-00022438
Article, Secondary publication, Publisher's Version
Liu, Chang ; Wang, Wei ; Wang, Zhixun ; Chen, Shangfa ; Su, Peifang ; Gao, Hongyuan ; Xu, Chao ; Ge, Biyuan ; Ding, Hongfa ; Liu, Liang (2022)
Optimal operation and locating method of new energy building with shared charging service.
In: Frontiers in Energy Research, 2022, 10
doi: 10.26083/tuprints-00022037
Article, Secondary publication, Publisher's Version
Wang, Junbo ; Dreyer, Sören L. ; Wang, Kai ; Ding, Ziming ; Diemant, Thomas ; Karkera, Guruprakash ; Ma, Yanjiao ; Sarkar, Abhishek ; Zhou, Bei ; Gorbunov, Mikhail V. ; Omar, Ahmad ; Mikhailova, Daria ; Presser, Volker ; Fichtner, Maximilian ; Hahn, Horst ; Brezesinski, Torsten ; Breitung, Ben ; Wang, Qingsong (2022)
P2-type layered high-entropy oxides as sodium-ion cathode materials.
In: Materials Futures, 2022, 1 (3)
doi: 10.26083/tuprints-00022384
Article, Secondary publication, Publisher's Version
Khafaji, Hayder Q. A. ; Abdul Wahhab, Hasanain Adnan ; Al-Maliki, Wisam Abed Kattea ; Alobaid, Falah ; Epple, Bernd (2022)
Energy and Exergy Analysis for Single Slope Passive Solar Still with Different Water Depth Located in Baghdad Center.
In: Applied Sciences, 2022, 12 (17)
doi: 10.26083/tuprints-00022321
Article, Secondary publication, Publisher's Version
Sadiki, Amsini ; Agrebi, Senda ; Ries, Florian (2022)
Entropy Generation Analysis in Turbulent Reacting Flows and Near Wall: A Review.
In: Entropy, 2022, 24 (8)
doi: 10.26083/tuprints-00022314
Article, Secondary publication, Publisher's Version
Fritz, Markus ; Aydemir, Ali ; Schebek, Liselotte (2022)
How Much Excess Heat Might Be Used in Buildings? A Spatial Analysis at the Municipal Level in Germany.
In: Energies, 2022, 15 (17)
doi: 10.26083/tuprints-00022318
Article, Secondary publication, Publisher's Version
Schreck, Sebastian ; Sudhoff, Robin ; Thiem, Sebastian ; Niessen, Stefan (2022)
On the Importance of Grid Tariff Designs in Local Energy Markets.
In: Energies, 2022, 15 (17)
doi: 10.26083/tuprints-00022317
Article, Secondary publication, Publisher's Version
Gołaszewski, Jacek ; Klemczak, Barbara ; Smolana, Aneta ; Gołaszewska, Małgorzata ; Cygan, Grzegorz ; Mankel, Christoph ; Peralta, Ignacio ; Röser, Frank ; Koenders, Eduardus A. B. (2022)
Effect of Foaming Agent, Binder and Density on the Compressive Strength and Thermal Conductivity of Ultra-Light Foam Concrete.
In: Buildings, 2022, 12 (8)
doi: 10.26083/tuprints-00022323
Article, Secondary publication, Publisher's Version
Schneider, Volker ; Behrendt, Cara ; Höltje, Pauline ; Cornel, Daniel ; Becker-Dombrowsky, Florian Michael ; Puchtler, Steffen ; Gutiérrez Guzmán, Francisco ; Ponick, Bernd ; Jacobs, Georg ; Kirchner, Eckhard (2022)
Electrical Bearing Damage, A Problem in the Nano- and Macro-Range.
In: Lubricants, 2022, 10 (8)
doi: 10.26083/tuprints-00022331
Article, Secondary publication, Publisher's Version
Zhao, Guoping ; Mohseni, Omid ; Murcia, Marc ; Seyfarth, André ; Sharbafi, Maziar A. (2022)
Exploring the effects of serial and parallel elasticity on a hopping robot.
In: Frontiers in Neurorobotics, 2022, 16
doi: 10.26083/tuprints-00022335
Article, Secondary publication, Publisher's Version
Ebrahimian, Serajeddin ; Nahvi, Ali ; Tashakori, Masoumeh ; Salmanzadeh, Hamed ; Mohseni, Omid ; Leppänen, Timo (2022)
Multi-Level Classification of Driver Drowsiness by Simultaneous Analysis of ECG and Respiration Signals Using Deep Neural Networks.
In: International Journal of Environmental Research and Public Health, 2022, 19 (17)
doi: 10.26083/tuprints-00022328
Article, Secondary publication, Publisher's Version
Obando Vega, Pedro Javier ; Coussement, Axel ; Sadiki, Amsini ; Parente, Alessandro (2022)
Non-Premixed Filtered Tabulated Chemistry for LES: Evaluation on Sandia Flames D and E.
In: Fuels, 2022, 3 (3)
doi: 10.26083/tuprints-00022325
Article, Secondary publication, Publisher's Version
Salg, Gabriel Alexander ; Blaeser, Andreas ; Gerhardus, Jamina Sofie ; Hackert, Thilo ; Kenngott, Hannes Goetz (2022)
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies.
In: International Journal of Molecular Sciences, 2022, 23 (15)
doi: 10.26083/tuprints-00022329
Article, Secondary publication, Publisher's Version
Theobald, Nina ; Joisten, Philip ; Abendroth, Bettina (2022)
Anthropomorphismus in der Interaktion zwischen Fußgänger:innen und automatisierten Fahrzeugen – ein Überblick zum aktuellen Forschungsstand.
Frühjahrskongress 2022 - Technologie und Bildung in hybriden Arbeitswelten. Magdeburg (02.03.2022-04.03.2022)
doi: 10.26083/tuprints-00021846
Conference or Workshop Item, Secondary publication, Publisher's Version
Joisten, Philip (2022)
Erfahrungseffekte von Fußgänger:innen bei der Interaktion mit automatisierten Pkw : Ein Untersuchungskonzept.
Frühjahrskongress 2022 - Technologie und Bildung in hybriden Arbeitswelten. Magdeburg (02.03.2022-04.03.2022)
doi: 10.26083/tuprints-00021863
Conference or Workshop Item, Secondary publication, Publisher's Version
Theobald, Nina ; Joisten, Philip ; Abendroth, Bettina (2022)
Measuring Pedestrians’ Gap Acceptance When Interacting with Vehicles - A Human Gait Oriented Approach.
24th International Conference on Human-Computer Interaction, HCII 2022. Virtual Event (26.06.2022-01.07.2022)
doi: 10.26083/tuprints-00021864
Conference or Workshop Item, Secondary publication, Postprint
Gering, Stefan ; Adamy, Jürgen ; Eciolaza, Luka ; Sugeno, Michio (2022)
Parallel Distributed Compensation for Piecewise Bilinear Models and Recurrent Fuzzy Systems Based on Piecewise Quadratic Lyapunov Functions.
24. Workshop Computational Intelligence. Dortmund, Germany (27.11.2014-28.11.2014)
doi: 10.26083/tuprints-00022342
Conference or Workshop Item, Secondary publication, Publisher's Version
Li, Zaijuan ; Willert, Volker (2022)
Subtleties of extrinsic calibration of cameras with non-overlapping fields of view.
Forum Bildverarbeitung 2018. Karlsruhe, Germany (29.11.2018-30.11.2018)
doi: 10.26083/tuprints-00017613
Conference or Workshop Item, Secondary publication, Publisher's Version
Gering, Stefan ; Adamy, Jürgen (2022)
Synthese von Zustands- und Ausgangsrückführungen für rekurrente Fuzzy-Systeme.
23. Workshop Computational Intelligence. Dortmund, Germany (05.12.2013-06.12.2013)
doi: 10.26083/tuprints-00022343
Conference or Workshop Item, Secondary publication, Publisher's Version
Ackermann, Stefan Martin ; Winner, Hermann (2022)
Systemarchitektur und Fahrmanöver zum sicheren Anhalten modularer automatisierter Fahrzeuge.
13. Workshop Fahrerassistenzsysteme und automatisiertes Fahren. Walting, Germany (01.04.2020-03.04.2020)
doi: 10.26083/tuprints-00022080
Conference or Workshop Item, Secondary publication, Publisher's Version
Federici, Stefania ; Ademovic, Zahida ; Amorim, Mónica J. B. ; Bigalke, Moritz ; Cocca, Mariacristina ; Depero, Laura Eleonora ; Dutta, Joydeep ; Fritzsche, Wolfgang ; Hartmann, Nanna B. ; Kalčikova, Gabriela ; Keller, Nicolas ; Meisel, Thomas C. ; Mitrano, Denise M. ; Morrison, Liam ; Raquez, Jean-Marie ; Tubić, Aleksandra ; Velimirovic, Milica (2022)
COST Action PRIORITY: An EU Perspective on Micro- and Nanoplastics as Global Issues.
In: Microplastics, 2022, 1 (2)
doi: 10.26083/tuprints-00022190
Article, Secondary publication, Publisher's Version
Pappas, Georgios ; Siegel, Joshua E. ; Kassens-Noor, Eva ; Rutkowski, Jacob ; Politopoulos, Konstantinos ; Zorpas, Antonis A. (2022)
Game-Based Simulation and Study of Pedestrian-Automated Vehicle Interactions.
In: Automation, 2022, 3 (3)
doi: 10.26083/tuprints-00022191
Article, Secondary publication, Publisher's Version
Wenzel, Jan ; Bienefeld, Christoph ; Kretschmer, Alexander ; Kirchner, Eckhard (2022)
Introducing an Open-Source Simulation Model for Track Rollers Considering Friction.
In: Applied Mechanics, 2022, 3 (2)
doi: 10.26083/tuprints-00022186
Article, Secondary publication, Publisher's Version
Wächter, Michael ; Linn, Alexander ; Wuthenow, Ralf ; Esderts, Alfons ; Gaier, Christian ; Kraft, Jan ; Fällgren, Carl ; Vormwald, Michael (2022)
On Scaled Normal Stresses in Multiaxial Fatigue and Their Exemplary Application to Ductile Cast Iron.
In: Applied Mechanics, 2022, 3 (1)
doi: 10.26083/tuprints-00022187
Article, Secondary publication, Publisher's Version
Harder, André ; Hausmann, Maximilian ; Kraus, Benjamin ; Kirchner, Eckhard ; Hasse, Alexander (2022)
Sensory Utilizable Design Elements: Classifications, Applications and Challenges.
In: Applied Mechanics, 2022, 3 (1)
doi: 10.26083/tuprints-00022184
Article, Secondary publication, Publisher's Version
Stenzel, David ; Zhou, Bei ; Okafor, Chukwudalu ; Kante, Mohana Veeraju ; Lin, Ling ; Melinte, Georgian ; Bergfeldt, Thomas ; Botros, Miriam ; Hahn, Horst ; Breitung, Ben ; Schweidler, Simon (2022)
High-entropy spinel-structure oxides as oxygen evolution reaction electrocatalyst.
In: Frontiers in Energy Research, 2022, 10
doi: 10.26083/tuprints-00022029
Article, Secondary publication, Publisher's Version
David, Amrei ; Schmalz, Britta (2022)
A Systematic Analysis of the Interaction between Rain-on-Grid-Simulations and Spatial Resolution in 2D Hydrodynamic Modeling.
In: Water, 2022, 13 (17)
doi: 10.26083/tuprints-00022085
Article, Secondary publication, Publisher's Version
Badi, Nacer ; Theodore, Azemtsop Manfo ; Alghamdi, Saleh A. ; Al-Aoh, Hatem A. ; Lakhouit, Abderrahim ; Singh, Pramod K. ; Norrrahim, Mohd Nor Faiz ; Nath, Gaurav (2022)
The Impact of Polymer Electrolyte Properties on Lithium-Ion Batteries.
In: Polymers, 2022, 14 (15)
doi: 10.26083/tuprints-00022031
Article, Secondary publication, Publisher's Version
Magosi, Zoltan Ferenc ; Li, Hexuan ; Rosenberger, Philipp ; Wan, Li ; Eichberger, Arno (2022)
A Survey on Modelling of Automotive Radar Sensors for Virtual Test and Validation of Automated Driving.
In: Sensors, 2022, 22 (15)
doi: 10.26083/tuprints-00022032
Article, Secondary publication, Publisher's Version
Keil, Tom ; Minnert, Christian ; Bruder, Enrico ; Durst, Karsten (2022)
Solid solution hardening effects on structure evolution and mechanical properties of nanostructured binary and high entropy alloys after high pressure torsion.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1249
doi: 10.26083/tuprints-00021999
Article, Secondary publication, Publisher's Version
Schönherr, Josef Arthur ; Duarte, Larissa ; Madia, Mauro ; Zerbst, Uwe ; Geilen, Max Benedikt ; Klein, Marcus ; Oechsner, Matthias (2022)
Robust Determination of Fatigue Crack Propagation Thresholds from Crack Growth Data.
In: Materials, 2022, 15 (14)
doi: 10.26083/tuprints-00021867
Article, Secondary publication, Publisher's Version
Ohmer, Dominik ; Yi, Min ; Gutfleisch, Oliver ; Xu, Bai-Xiang (2022)
Phase-field modelling of paramagnetic austenite–ferromagnetic martensite transformation coupled with mechanics and micromagnetics.
In: International Journal of Solids and Structures, 2022, 238
doi: 10.26083/tuprints-00021033
Article, Secondary publication, Postprint
Al-Maliki, Wisam Abed Kattea ; Khafaji, Hayder Q. A. ; Abdul Wahhab, Hasanain Adnan ; Al-Khafaji, Hussein M. H. ; Alobaid, Falah ; Epple, Bernd (2022)
Advances in Process Modelling and Simulation of Parabolic Trough Power Plants: A Review.
In: Energies, 2022, 15 (15)
doi: 10.26083/tuprints-00021861
Article, Secondary publication, Publisher's Version
Bre, Facundo ; Caggiano, Antonio ; Koenders, Eduardus A. B. (2022)
Multiobjective Optimization of Cement-Based Panels Enhanced with Microencapsulated Phase Change Materials for Building Energy Applications.
In: Energies, 2022, 15 (14)
doi: 10.26083/tuprints-00021860
Article, Secondary publication, Publisher's Version
Augustin, Lomena Mulenda ; Vertomene, Sumuna Temo ; Bernard, Ndaye Nkanka ; Sadiki, Amsini ; Haddy, Mbuyi Katshiatshia (2022)
A New Perspective on Cooking Stove Loss Coefficient Assessment by Means of the Second Law Analysis.
In: Entropy, 2022, 24 (8)
doi: 10.26083/tuprints-00021859
Article, Secondary publication, Publisher's Version
Sudhoff, Robin ; Schreck, Sebastian ; Thiem, Sebastian ; Niessen, Stefan (2022)
Operating Renewable Energy Communities to Reduce Power Peaks in the Distribution Grid: An Analysis on Grid-Friendliness, Different Shares of Participants, and Economic Benefits.
In: Energies, 2022, 15 (15)
doi: 10.26083/tuprints-00021862
Article, Secondary publication, Publisher's Version
Klein, Dominik K. ; Fernández, Mauricio ; Martin, Robert J. ; Neff, Patrizio ; Weeger, Oliver (2022)
Polyconvex anisotropic hyperelasticity with neural networks.
In: Journal of the Mechanics and Physics of Solids, 2021, 159
doi: 10.26083/tuprints-00020163
Article, Secondary publication, Postprint
Sinzger, Mark ; Gehri, Maximilian ; Koeppl, Heinz (2022)
Poisson channel with binary Markov input and average sojourn time constraint.
ISIT'20 - International Symposium on Information Theory. Online (21.06.2020-26.06.2020)
doi: 10.26083/tuprints-00021525
Conference or Workshop Item, Secondary publication, Postprint
Martin, Daniel M. ; Bäcker, Frederic ; Deusinger, Björn ; Kubik, Christian ; Gehringer, Philipp ; Schröder, Joana ; Groche, Peter (2022)
Design Guidelines for interlocked stator cores made of CoFe sheets.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021476
Article, Secondary publication, Publisher's Version
Günzel, Janosch ; Hauß, Joachim ; Gaedigk, Christoph ; Bergmann, Jacqueline ; Groche, Peter (2022)
Development of a process chain for multi-stage sheet metal forming of high-strength aluminium alloys.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021475
Article, Secondary publication, Publisher's Version
Schätzlein, Eva ; Kicker, Christoph ; Söhling, Nicolas ; Ritz, Ulrike ; Neijhoft, Jonas ; Henrich, Dirk ; Frank, Johannes ; Marzi, Ingo ; Blaeser, Andreas (2022)
3D-Printed PLA-Bioglass Scaffolds with Controllable Calcium Release and MSC Adhesion for Bone Tissue Engineering.
In: Polymers, 2022, 14 (12)
doi: 10.26083/tuprints-00021633
Article, Secondary publication, Publisher's Version
Hübler, Daniela ; Winkler, Kai ; Riedel, Ralf ; Kamrani, Sepideh ; Fleck, Claudia (2022)
Cyclic deformation behavior of Mg–SiC nanocomposites on the macroscale and nanoscale.
In: Fatigue & Fracture of Engineering Materials & Structures, 2022, 45 (2)
doi: 10.26083/tuprints-00020994
Article, Secondary publication, Publisher's Version
Schmitt, Thomas ; Hoffmann, Matthias ; Rodemann, Tobias ; Adamy, Jürgen (2022)
Incorporating Human Preferences in Decision Making for Dynamic Multi-Objective Optimization in Model Predictive Control.
In: Inventions, 2022, 7 (3)
doi: 10.26083/tuprints-00021629
Article, Secondary publication, Publisher's Version
Chen, Guoxing ; Feldhoff, Armin ; Weidenkaff, Anke ; Li, Claudia ; Liu, Shaomin ; Zhu, Xuefeng ; Sunarso, Jaka ; Huang, Kevin ; Wu, Xiao‐Yu ; Ghoniem, Ahmed F. ; Yang, Weishen ; Xue, Jian ; Wang, Haihui ; Shao, Zongping ; Duffy, Jack H. ; Brinkman, Kyle S. ; Tan, Xiaoyao ; Zhang, Yan ; Jiang, Heqing ; Costa, Rémi ; Friedrich, Kaspar Andreas ; Kriegel, Ralf (2022)
Roadmap for Sustainable Mixed Ionic‐Electronic Conducting Membranes.
In: Advanced Functional Materials, 2022, 32 (6)
doi: 10.26083/tuprints-00020991
Article, Secondary publication, Publisher's Version
Niedermayer, Uwe ; Leedle, Kenneth ; Musumeci, Pietro ; Schmid, Steffen A. (2022)
Beam dynamics in dielectric laser acceleration.
In: Journal of Instrumentation, 2022, 17 (5)
doi: 10.26083/tuprints-00021366
Article, Secondary publication, Publisher's Version
Brumm, Pauline ; Fritschen, Anna ; Doß, Lara ; Dörsam, Edgar ; Blaeser, Andreas (2022)
Fabrication of biomimetic networks using viscous fingering in flexographic printing.
In: Biomedical Materials, 2022, 17 (4)
doi: 10.26083/tuprints-00021474
Article, Secondary publication, Publisher's Version
Hossain, Umme Habiba ; Jantsen, Gennadi ; Muench, Falk ; Kunz, Ulrike ; Ensinger, Wolfgang (2022)
Increasing the structural and compositional diversity of ion-track templated 1D nanostructures through multistep etching, plastic deformation, and deposition.
In: Nanotechnology, 2022, 33 (24)
doi: 10.26083/tuprints-00021120
Article, Secondary publication, Publisher's Version
eds.: Disser, Michael ; Hoffmann, André ; Kuhn, Luisa ; Scheich, Patrick ; Institut für Numerische Methoden und Informatik im Bauwesen, TU Darmstadt (2022)
32. Forum Bauinformatik 2021.
32. Forum Bauinformatik. Darmstadt (09.09.2021-10.09.2021)
doi: 10.26083/tuprints-00021521
Conference or Workshop Item, Primary publication, Publisher's Version
Ye, Xinglong ; Fortunato, Nuno ; Sarkar, Abhishek ; Geßwein, Holger ; Wang, Di ; Chen, Xiang ; Eggert, Benedikt ; Wende, Heiko ; Brand, Richard A. ; Zhang, Hongbin ; Hahn, Horst ; Kruk, Robert (2022)
Creating a Ferromagnetic Ground State with Tc Above Room Temperature in a Paramagnetic Alloy through Non‐Equilibrium Nanostructuring.
In: Advanced Materials, 2022, 34 (11)
doi: 10.26083/tuprints-00021539
Article, Secondary publication, Publisher's Version
Lin, Ling ; Wang, Kai ; Sarkar, Abhishek ; Njel, Christian ; Karkera, Guruprakash ; Wang, Qingsong ; Azmi, Raheleh ; Fichtner, Maximilian ; Hahn, Horst ; Schweidler, Simon ; Breitung, Ben (2022)
High‐Entropy Sulfides as Electrode Materials for Li‐Ion Batteries.
In: Advanced Energy Materials, 2022, 12 (8)
doi: 10.26083/tuprints-00021540
Article, Secondary publication, Publisher's Version
Espinel‐Ríos, Sebastián ; Bettenbrock, Katja ; Klamt, Steffen ; Findeisen, Rolf (2022)
Maximizing batch fermentation efficiency by constrained model‐based optimization and predictive control of adenosine triphosphate turnover.
In: AIChE Journal, 2022, 68 (4)
doi: 10.26083/tuprints-00021546
Article, Secondary publication, Publisher's Version
Rubab, Anosha ; Baig, Nadeem ; Sher, Muhammad ; Ali, Mubarak ; Ul‐Hamid, Anwar ; Jabeen, Naila ; Khan, Latif U. ; Sohail, Manzar (2022)
Synthesis and Characterization of a Carbon‐Supported Cobalt Nitride Nano‐Catalyst.
In: ChemNanoMat, 2022, 8 (2)
doi: 10.26083/tuprints-00021529
Article, Secondary publication, Publisher's Version
Gierth, Sandro ; Hartl, Sandra ; Pollack, Martin ; Hasse, Christian ; Hofmann, Uwe ; Zikoridse, Gennadi ; Rautenberg, Helge ; Will, Frank ; Hahn, Christoph ; Kureti, Sven (2022)
Urea Conversion for Low‐Temperature Selective Catalytic Reduction in a Swirled Diesel Exhaust Gas Configuration.
In: Chemical Engineering & Technology, 2022, 45 (4)
doi: 10.26083/tuprints-00021538
Article, Secondary publication, Publisher's Version
Saul, Sebastian (2022)
Entwicklung und Validierung einer Skalierungsmethode für Ventilatoren.
doi: 10.26083/tuprints-00021480
Book, Secondary publication, Publisher's Version
Gutiérrez‐Jorquera, Juan ; Kummer, Florian (2022)
A fully coupled high‐order discontinuous Galerkin method for diffusion flames in a low‐Mach number framework.
In: International Journal for Numerical Methods in Fluids, 2022, 94 (4)
doi: 10.26083/tuprints-00021545
Article, Secondary publication, Publisher's Version
Herceg, Sina ; Kaaya, Ismail ; Ascencio-Vásquez, Julián ; Fischer, Marie ; Weiß, Kar