Article

Ahmels, Laura ; Bruns, Sebastian ; Durst, Karsten ; Bruder, Enrico (2024)
Observation of Grain Boundary Sliding in a Lamellar Ultrafine‐Grained Steel.
In: Advanced Engineering Materials, 2024, 26 (19)
doi: 10.26083/tuprints-00028271
Article, Secondary publication, Publisher's Version

Auernhammer, Julia ; Keil, Tom ; Lin, Binbin ; Schäfer, Jan-Lukas ; Xu, Bai-Xiang ; Biesalski, Markus ; Stark, Robert W. (2024)
Mapping humidity-dependent mechanical properties of a single cellulose fibre.
In: Cellulose, 2021, 28 (13)
doi: 10.26083/tuprints-00023522
Article, Secondary publication, Publisher's Version

Benzine, Omar ; Bruns, Sebastian ; Pan, Zhiwen ; Durst, Karsten ; Wondraczek, Lothar (2024)
Local Deformation of Glasses is Mediated by Rigidity Fluctuation on Nanometer Scale.
In: Advanced Science, 2018, 5 (10)
doi: 10.26083/tuprints-00027260
Article, Secondary publication, Publisher's Version

Bruder, Enrico (2018)
Mechanical Properties of ARMCO® Iron after Large and Severe Plastic Deformation : Application Potential for Precursors to Ultrafine Grained Microstructures.
In: Metals, 2018, (3)
Article, Secondary publication, Publisher's Version

Bruns, Sebastian ; Minnert, Christian ; Pethö, Laszlo ; Michler, Johann ; Durst, Karsten (2023)
Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation.
In: Advanced Science, 2023, 10 (7)
doi: 10.26083/tuprints-00023715
Article, Secondary publication, Publisher's Version

Bruns, Sebastian ; Petho, Laszlo ; Minnert, Christian ; Michler, Johann ; Durst, Karsten (2020)
Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting.
In: Materials & Design, 2020, 186
doi: 10.25534/tuprints-00011386
Article, Secondary publication, Publisher's Version

Bruns, Sebastian ; Uesbeck, Tobias ; Fuhrmann, Sindy ; Tarragó Aymerich, Mariona ; Wondraczek, Lothar ; Ligny, Dominique de ; Durst, Karsten (2024)
Indentation densification of fused silica assessed by raman spectroscopy and constitutive finite element analysis.
In: Journal of the American Ceramic Society, 2020, 103 (5)
doi: 10.26083/tuprints-00015639
Article, Secondary publication, Publisher's Version

Bruns, Sebastian ; Uesbeck, Tobias ; Weil, Dominik ; Möncke, Doris ; van Wüllen, Leo ; Durst, Karsten ; de Ligny, Dominique (2021)
Influence of Al2O3 Addition on Structure and Mechanical Properties of Borosilicate Glasses.
In: Frontiers in Materials, 2020, 7
doi: 10.26083/tuprints-00019235
Article, Secondary publication, Publisher's Version

De Carolis, Dario M. ; Vrankovic, Dragoljub ; Kiefer, Samira A. ; Bruder, Enrico ; Dürrschnabel, Michael Thomas ; Molina‐Luna, Leopoldo ; Graczyk‐Zajac, Magdalena ; Riedel, Ralf (2024)
Towards a Greener and Scalable Synthesis of Na₂Ti₆O₁₃ Nanorods and Their Application as Anodes in Batteries for Grid-Level Energy Storage.
In: Energy Technology : Generation, Conversion, Storage, Distribution, 2021, 9 (1)
doi: 10.26083/tuprints-00017782
Article, Secondary publication, Publisher's Version

Diehl, Martin ; Niehuesbernd, Jörn ; Bruder, Enrico (2024)
Quantifying the Contribution of Crystallographic Texture and Grain Morphology on the Elastic and Plastic Anisotropy of bcc Steel.
In: Metals, 2019, 9 (12)
doi: 10.26083/tuprints-00015736
Article, Secondary publication, Publisher's Version

Dubois, Christelle ; Herzog, Nicole ; Rüttiger, Christian ; Geißler, Andreas ; Grange, Eléonor ; Kunz, Ulrike ; Kleebe, Hans-Joachim ; Biesalski, Markus ; Meckel, Tobias ; Gutmann, Torsten ; Gallei, Markus ; Andrieu-Brunsen, Annette (2022)
Fluid Flow Programming in Paper-Derived Silica–Polymer Hybrids.
In: Langmuir, 2017, 33 (1)
doi: 10.26083/tuprints-00021675
Article, Secondary publication, Postprint

Fromm, Timo ; Bruns, Sebastian ; Müller, Marie-Christin ; Fink, Alexander ; Borchardt, Rudolf ; Rosiwal, Stefan M. ; Durst, Karsten (2024)
Bioinspired damage tolerant diamond-metal laminates by alternating CVD and PVD processes.
In: Materials & Design, 2022, 213
doi: 10.26083/tuprints-00026605
Article, Secondary publication, Publisher's Version

Fuhrmann, Sindy ; Macedo, Guilherme N. B. M. de ; Limbach, René ; Krywka, Christina ; Bruns, Sebastian ; Durst, Karsten ; Wondraczek, Lothar (2023)
Indentation-Induced Structural Changes in Vitreous Silica Probed by in-situ Small-Angle X-Ray Scattering.
In: Frontiers in Materials, 2020, 7
doi: 10.26083/tuprints-00016611
Article, Secondary publication, Publisher's Version

Grammes, Thilo ; Limbach, René ; Bruns, Sebastian ; Wüllen, Leo van ; Ligny, Dominique de ; Kamitsos, Efstratios I. ; Durst, Karsten ; Wondraczek, Lothar ; Brauer, Delia S. (2024)
Tailoring the Mechanical Properties of Metaluminous Aluminosilicate Glasses by Phosphate Incorporation.
In: Frontiers in Materials, 2020, 7
doi: 10.26083/tuprints-00026699
Article, Secondary publication, Publisher's Version

Javaid, Farhan ; Pouriayevali, Habib ; Durst, Karsten (2024)
Dislocation–grain boundary interactions: recent advances on the underlying mechanisms studied via nanoindentation testing.
In: Journal of Materials Research, 2021, 36 (12)
doi: 10.26083/tuprints-00023581
Article, Secondary publication, Publisher's Version

Kang, Sangjun ; Wang, Di ; Caron, Arnaud ; Minnert, Christian ; Durst, Karsten ; Kübel, Christian ; Mu, Xiaoke (2023)
Direct Observation of Quadrupolar Strain Fields forming a Shear Band in Metallic Glasses.
In: Advanced Materials, 2023, 35 (25)
doi: 10.26083/tuprints-00024301
Article, Secondary publication, Publisher's Version

Keil, Tom ; Bruder, Enrico ; Durst, Karsten (2019)
Exploring the compositional parameter space of high-entropy alloys using a diffusion couple approach.
In: Materials & Design, 2019, 176
Article, Secondary publication, Publisher's Version

Keil, Tom ; Minnert, Christian ; Bruder, Enrico ; Durst, Karsten (2022)
Solid solution hardening effects on structure evolution and mechanical properties of nanostructured binary and high entropy alloys after high pressure torsion.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1249
doi: 10.26083/tuprints-00021999
Article, Secondary publication, Publisher's Version

Keil, Tom ; Utt, Daniel ; Bruder, Enrico ; Stukowski, Alexander ; Albe, Karsten ; Durst, Karsten (2024)
Solid solution hardening in CrMnFeCoNi-based high entropy alloy systems studied by a combinatorial approach.
In: Journal of Materials Research, 2021, 36 (12)
doi: 10.26083/tuprints-00023580
Article, Secondary publication, Publisher's Version

Khalil, Adnan ; Zimmermann, Matthias ; Bell, Alena K. ; Kunz, Ulrike ; Hardt, Steffen ; Kleebe, Hans-Joachim ; Stark, Robert W. ; Stephan, Peter ; Andrieu-Brunsen, Annette (2022)
Insights into the interplay of wetting and transport in mesoporous silica films.
In: Journal of Colloid and Interface Science, 2020, 560
doi: 10.26083/tuprints-00021740
Article, Secondary publication, Postprint

Liu, Jianing ; Yang, Ying ; Staab, Franziska ; Doñate-Buendia, Carlos ; Streubel, René ; Gökce, Bilal ; Maccari, Fernando ; Gabriel, Philipp ; Zingsem, Benjamin ; Spoddig, Detlef ; Durst, Karsten ; Farle, Michael ; Gutfleisch, Oliver ; Barcikowski, Stephan ; Skokov, Konstantin ; Ziefuß, Anna R. (2024)
Influence of Colloidal Additivation with Surfactant‐Free Laser‐Generated Metal Nanoparticles on the Microstructure of Suction‐Cast Nd–Fe–B Alloy.
In: Advanced Engineering Materials, 2023, 25 (22)
doi: 10.26083/tuprints-00027252
Article, Secondary publication, Publisher's Version

Maccari, F. ; Aubert, A. ; Ener, S. ; Bruder, E. ; Radulov, I. ; Skokov, K. ; Gutfleisch, O. (2024)
Formation of pure τ-phase in Mn–Al–C by fast annealing using spark plasma sintering.
In: Journal of Materials Science, 2022, 57 (10)
doi: 10.26083/tuprints-00026607
Article, Secondary publication, Publisher's Version

Maccari, Fernando ; Mishra, Tarini Prasad ; Keszler, Monica ; Braun, Tobias ; Adabifiroozjaei, Esmaeil ; Radulov, Iliya ; Jiang, Tianshu ; Bruder, Enrico ; Guillon, Olivier ; Molina-Luna, Leopoldo ; Bram, Martin ; Gutfleisch, Oliver (2023)
Nanocrystalline Nd–Fe–B Anisotropic Magnets by Flash Spark Plasma Sintering.
In: Advanced Engineering Materials, 2023, 25 (18)
doi: 10.26083/tuprints-00024691
Article, Secondary publication, Publisher's Version

Maier-Kiener, Verena ; Durst, Karsten (2024)
Advanced Nanoindentation Testing for Studying Strain-Rate Sensitivity and Activation Volume.
In: JOM, 2017, 69 (11)
doi: 10.26083/tuprints-00026981
Article, Secondary publication, Publisher's Version

Michler, T. ; Bruder, E. ; Lindner, S. (2024)
Hydrogen effects in X30MnCrN16‐14 austenitic steel.
In: Materials Science & Engineering Technology = Materialwissenschaft und Werkstofftechnik, 2020, 51 (4)
doi: 10.26083/tuprints-00016735
Article, Secondary publication, Publisher's Version

Minnert, Christian ; Durst, Karsten (2024)
Nanoindentation creep testing: Advantages and limitations of the constant contact pressure method.
In: Journal of Materials Research, 2022, 37 (2)
doi: 10.26083/tuprints-00023578
Article, Secondary publication, Publisher's Version

Minnert, Christian ; Oliver, Warren C. ; Durst, Karsten (2020)
New ultra-high temperature nanoindentation system for operating at up to 1100 °C.
In: Materials & Design, 2020, 192
doi: 10.25534/tuprints-00013342
Article, Secondary publication, Publisher's Version

Muhammad, Qaisar Khushi ; Valderrama, Marcela ; Yue, Mengkun ; Opitz, Alexander Karl ; Taibl, Stefanie ; Siebenhofer, Matthäus ; Bruder, Enrico ; Fleig, Jürgen ; Fang, Xufei ; Frömling, Till (2023)
Dislocation‐tuned electrical conductivity in solid electrolytes (9YSZ): A micro‐mechanical approach.
In: Journal of the American Ceramic Society, 2023, 106 (11)
doi: 10.26083/tuprints-00024672
Article, Secondary publication, Publisher's Version

Preuß, Oliver ; Bruder, Enrico ; Lu, Wenjun ; Zhuo, Fangping ; Minnert, Christian ; Zhang, Jiawen ; Rödel, Jürgen ; Fang, Xufei (2023)
Dislocation toughening in single‐crystal KNbO₃.
In: Journal of the American Ceramic Society, 2023, 106 (7)
doi: 10.26083/tuprints-00024324
Article, Secondary publication, Publisher's Version

Scheibel, Franziska ; Lauhoff, Christian ; Riegg, Stefan ; Krooß, Philipp ; Bruder, Enrico ; Adabifiroozjaei, Esmaeil ; Molina-Luna, Leopoldo ; Böhm, Stefan ; Chumlyakov, Yury I. ; Niendorf, Thomas ; Gutfleisch, Oliver (2022)
On the Impact of Additive Manufacturing Processes on the Microstructure and Magnetic Properties of Co–Ni–Ga Shape Memory Heusler Alloys.
In: Advanced Engineering Materials, 2022, 24 (10)
doi: 10.26083/tuprints-00022901
Article, Secondary publication, Publisher's Version

Shkodich, Natalia ; Staab, Franziska ; Spasova, Marina ; Kuskov, Kirill V. ; Durst, Karsten ; Farle, Michael (2022)
Effect of High-Pressure Torsion on the Microstructure and Magnetic Properties of Nanocrystalline CoCrFeNiGax (x = 0.5, 1.0) High Entropy Alloys.
In: Materials, 2022, 15 (20)
doi: 10.26083/tuprints-00022840
Article, Secondary publication, Publisher's Version

Sos, Marcel ; Meyer, Guillaume ; Durst, Karsten ; Mittelstedt, Christian ; Bruder, Enrico (2023)
Microstructure and mechanical properties of additively manufactured AlSi10Mg lattice structures from single contour exposure.
In: Materials & Design, 2023, 227
doi: 10.26083/tuprints-00023401
Article, Secondary publication, Publisher's Version

Sos, Marcel ; Tiphene, Gabrielle ; Loubet, Jean-Luc ; Bruns, Sebastian ; Bruder, Enrico ; Durst, Karsten (2024)
Mechanical softening of CuX alloys at elevated temperatures studied via high temperature scanning indentation.
In: Materials & Design, 2024, 240
doi: 10.26083/tuprints-00027666
Article, Secondary publication, Publisher's Version

Stohr, Tobias ; Fischer, Angelina ; Muench, Falk ; Antoni, Markus ; Wollstadt, Stephan ; Lohaus, Christian ; Kunz, Ulrike ; Clemens, Oliver ; Klein, Andreas ; Ensinger, Wolfgang (2022)
Electroless Nanoplating of Pd−Pt Alloy Nanotube Networks: Catalysts with Full Compositional Control for the Methanol Oxidation Reaction.
In: ChemElectroChem, 2020, 7 (3)
doi: 10.26083/tuprints-00015641
Article, Secondary publication, Publisher's Version

Xuan, Yang ; Fromm, Timo ; Bruns, Sebastian ; Borchardt, Rudolf ; Durst, Karsten ; Rosiwal, Stefan M. (2024)
A simple way to make tough diamond/metal laminates.
In: Journal of the European Ceramic Society, 2021, 41 (10)
doi: 10.26083/tuprints-00026604
Article, Secondary publication, Publisher's Version

Zehnder, Christoffer ; Bruns, Sebastian ; Peltzer, Jan-Niklas ; Durst, Karsten ; Korte-Kerzel, Sandra ; Möncke, Doris (2023)
Influence of Cooling Rate on Cracking and Plastic Deformation during Impact and Indentation of Borosilicate Glasses.
In: Frontiers in Materials, 2017, 4
doi: 10.26083/tuprints-00017045
Article, Secondary publication, Publisher's Version

Zhan, Ying ; Grottenmüller, Ralf ; Li, Wei ; Javaid, Farhan ; Riedel, Ralf (2023)
Evaluation of mechanical properties and hydrophobicity of room‐temperature, moisture‐curable polysilazane coatings.
In: Journal of Applied Polymer Science, 2021, 138 (21)
doi: 10.26083/tuprints-00017816
Article, Secondary publication, Publisher's Version

Zhu, Tingting ; Ding, Kuan ; Oshima, Yu ; Amiri, Anahid ; Bruder, Enrico ; Stark, Robert W. ; Durst, Karsten ; Matsunaga, Katsuyuki ; Nakamura, Atsutomo ; Fang, Xufei (2024)
Switching the fracture toughness of single-crystal ZnS using light irradiation.
In: Applied Physics Letters, 2021, 118 (15)
doi: 10.26083/tuprints-00026602
Article, Secondary publication, Publisher's Version

Ph.D. Thesis

Ahmels, Laura (2020)
Entstehung und Eigenschaften von ultrafeinkörnigen Gradientengefügen in höherfesten Stählen.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00009703
Ph.D. Thesis, Primary publication

Bohn, Tilman (2010)
Gefüge und mechanische Eigenschaften verzweigter Blechstrukturen.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Braun, Paul (2022)
Einfluss der Mikrostruktur auf das Fließverhalten von metallischen Werkstoffen in Mikro- und Nanokavitäten -Nanoimprinting-.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00020404
Ph.D. Thesis, Primary publication, Publisher's Version

Bruder, Enrico (2011)
Thermische Stabilität von Stählen mit ultrafeinkörnigen Gradientengefügen und deren mechanische Eigenschaften.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Bruns, Sebastian (2020)
The Indentation Densification and Cracking Behavior of Fused Silica.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00011778
Ph.D. Thesis, Primary publication

Javaid, Farhan (2017)
Indentation Size Effect: Analysis of Underlying Mechanisms in (001) oriented Strontium Titanate Single Crystal via Chemical Etching and EBSD.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Kashiwar, Ankush (2022)
TEM Investigations of Deformation Mechanisms in Nanocrystalline Metals and Multilayered Composites.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00020058
Ph.D. Thesis, Primary publication, Publisher's Version

Kaune, Vanessa (2013)
Entstehung und Eigenschaften von UFG Gradientengefügen durch Spaltprofilieren und Spaltbiegen höherfester Stähle.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Keil, Tom Christopher (2022)
Thermodynamic stability and solid solution hardening effects of CrMnFeCoNi based high entropy alloys.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022097
Ph.D. Thesis, Primary publication, Publisher's Version

Kobler, Aaron (2015)
Untersuchung der Deformationsmechanismen in nanostrukturierten Metallen und Legierungen mit Transmissionselektronenmikroskopie.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Kriegsmann, Arne (2014)
Richtungsabhängiges Rissausbreitungsverhalten in Gradientenwerkstoffen.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Kuhnt, Markus (2020)
Structural and magnetic characterization of Fe-Si-B-P-Cu alloys.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00011711
Ph.D. Thesis, Primary publication

Kunschert, Georg (2009)
Hochtemperatureigenschaften einer ODS-Fe26Cr Legierung zum Einsatz als Interkonnektor in einer SOFC-APU.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Minnert, Christian (2022)
Assessment of thermally activated dislocation mechanisms via novel indentation approaches.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00021976
Ph.D. Thesis, Primary publication, Publisher's Version

Nandam, Sree Harsha (2019)
Structure and mechanical properties of metallic nanoglasses.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Niehuesbernd, Jörn (2018)
Fertigungsinduzierte Eigenschaften von Spaltprofilen: Anisotropie, Umformbarkeit, Eigenspannungen.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Prach, Olena (2021)
Influence of Zr, Cr and Sc alloying on the microstructure and mechanical properties of a Al-Mg-Si casting alloy.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00017213
Ph.D. Thesis, Primary publication, Publisher's Version

Scheil, Jan (2016)
Entwicklung von Austenitisch-Ferritischem Gusseisen (ADI) aus EN-JS2070: Mikrostruktur, mechanische Eigenschaften und deren Auswirkung auf die Oberflächenbearbeitung durch das Maschinelle Oberflächenhämmern.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Schmid, Christoph (2021)
Prozess-Struktur-Eigenschaftskorrelation kohlenstoffbasierter Hartstoffschichten.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00017521
Ph.D. Thesis, Primary publication, Publisher's Version