Article

Al-Baradoni, Nassr ; Groche, Peter (2021)
Sensor Integrated Load-Bearing Structures: Measuring Axis Extension with DIC-Based Transducers.
In: Sensors, 2021, 21 (12)
doi: 10.26083/tuprints-00019383
Article, Secondary publication, Publisher's Version

Günzel, Janosch ; Hauß, Joachim ; Gaedigk, Christoph ; Bergmann, Jacqueline ; Groche, Peter (2022)
Development of a process chain for multi-stage sheet metal forming of high-strength aluminium alloys.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021475
Article, Secondary publication, Publisher's Version

Hoppe, Florian ; Knoll, Maximilian ; Götz, Benedict ; Schaeffner, Maximilian ; Groche, Peter (2022)
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process.
In: Applied Mechanics and Materials, 885
doi: 10.26083/tuprints-00020444
Article, Secondary publication, Publisher's Version

Klinge, Lina ; Kluy, Lukas ; Spiegel, Christopher ; Siemers, Carsten ; Groche, Peter ; Coraça-Huber, Débora (2023)
Nanostructured Ti-13Nb-13Zr alloy for implant application — material scientific, technological, and biological aspects.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00024504
Article, Secondary publication, Publisher's Version

Kramer, Philipp ; Groche, Peter (2019)
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
In: Lubricants, 2019, (2)
Article, Secondary publication

Mann, Arne ; Bürgel, Christoph ; Groche, Peter (2019)
A Modeling Strategy for Predicting the Properties of Paraffin Wax Actuators.
In: Actuators, 2018, 7 (4)
Article, Secondary publication

Mann, Arne ; Germann, Thiemo ; Ruiter, Mats ; Groche, Peter (2020)
The challenge of upscaling paraffin wax actuators.
In: Materials & Design, 2020, 190
doi: 10.25534/tuprints-00011600
Article, Secondary publication

Martin, Daniel M. ; Bäcker, Frederic ; Deusinger, Björn ; Kubik, Christian ; Gehringer, Philipp ; Schröder, Joana ; Groche, Peter (2022)
Design Guidelines for interlocked stator cores made of CoFe sheets.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021476
Article, Secondary publication, Publisher's Version

Niessen, Benedikt ; Schumacher, Eugen ; Lueg-Althoff, Jörn ; Bellmann, Jörg ; Böhme, Marcus ; Böhm, Stefan ; Tekkaya, A. Erman ; Beyer, Eckhard ; Leyens, Christoph ; Wagner, Martin Franz-Xaver ; Groche, Peter (2021)
Interface Formation during Collision Welding of Aluminum.
In: Metals, 2020, 10 (9)
doi: 10.26083/tuprints-00018646
Article, Secondary publication, Publisher's Version

Recklin, V. ; Dietrich, F. ; Groche, P. (2023)
In-situ-measurement of the friction coefficient in the deep drawing process.
In: Journal of Physics: Conference Series, 2017, 896 (1)
doi: 10.26083/tuprints-00020933
Article, Secondary publication, Publisher's Version

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2018)
Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming.
In: Lubricants, 2018, 6 (2)
Article, Secondary publication

Ries, Florian ; Li, Yongxiang ; Nishad, Kaushal ; Janicka, Johannes ; Sadiki, Amsini (2019)
Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation.
In: Entropy, 2019, (2)
Article, Secondary publication

Sajadifar, S. V. ; Suckow, T. ; Heider, B. ; Oechsner, M. ; Groche, P. ; Niendorf, T. (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version

Schell, Lukas ; Sellner, Erik ; Massold, Michael ; Groche, Peter (2023)
Tribology in Warm and Hot Aluminum Sheet Forming: Transferability of Strip Drawing Tests to Forming Trials.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024667
Article, Secondary publication, Publisher's Version

Sellner, Erik ; Xu, Yikai ; Groche, Peter (2023)
Extension of Process Limits in High‐Strength Aluminum Forming by Local Contact Heating.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024663
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Bütev Öcal, Ezgi ; Groche, Peter (2023)
A Comparative Study on the Production of a Hat Profile by Roll Forming and Stamping.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024698
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Völkers, Stephan ; Bütev Öcal, Ezgi ; Grass, Markus ; Böhm, Stefan ; Groche, Peter (2022)
Effect of Shortened Post Weld Heat Treatment on the Laser Welded AA7075 Alloy.
In: Metals, 2022, 12 (3)
doi: 10.26083/tuprints-00021489
Article, Secondary publication, Publisher's Version

Wu, Yutian ; Recklin, Viktor ; Groche, Peter (2022)
Strain Induced Surface Change in Sheet Metal Forming: Numerical Prediction, Influence on Friction and Tool Wear.
In: Journal of Manufacturing and Materials Processing, 2022, 5 (2)
doi: 10.26083/tuprints-00019588
Article, Secondary publication, Publisher's Version

Book

Pabst, Christian Bernd (2019)
Ursachen, Beeinflussung, Auswirkungen sowie Quantifizierung der Temperaturentwicklung in der Fügezone beim Kollisionsschweißen.
doi: 10.25534/tuprints-00009469
Book, Primary publication

Rumpel, Guido
ed.: Rumpel, Guido (2013)
Entscheidungshilfe zur Auswahl Schlanker Produktionssysteme für die Montage von Werkzeugmaschinen.
Book, Primary publication

Conference or Workshop Item

ed.: Groche, Peter (2023)
12. Fachtagung Walzprofilieren - 22.03.-23.03.2023.
12. Fachtagung Walzprofilieren. Darmstadt, Germany (22.-23.03.2023)
doi: 10.26083/tuprints-00023407
Conference or Workshop Item, Primary publication, Publisher's Version

eds.: Pelz, Peter F. ; Groche, Peter (2021)
Uncertainty in Mechanical Engineering : Proceedings of the 4th International Conference on Uncertainty in Mechanical Engineering (ICUME 2021), June 7–8, 2021.
International Conference on Uncertainty in Mechanical Engineering (ICUME 2021). (07.-08.06.2021)
doi: 10.26083/tuprints-00018917
Conference or Workshop Item, Secondary publication, Publisher's Version

eds.: Pelz, Peter F. ; Groche, Peter (2018)
Uncertainty in Mechanical Engineering III.
International Conference on Uncertainty in Mechanical Engineering. Darmstadt
Conference or Workshop Item, Primary publication

Hu, Chengliang ; Volz, Stefan ; Groche, Peter ; Moreau, Philippe ; Launhardt, Jonas ; Benabbou, N. ; Saito, S. ; Chen, H. ; Kitamura, Kazuhiko ; Dubar, Laurent (2023)
Modeling of friction in cold forging considering a wide range of tribological conditions.
ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022. Mailand, Italien (11.09.2022-14.09.2022)
doi: 10.26083/tuprints-00023238
Conference or Workshop Item, Secondary publication, Publisher's Version

Ph.D. Thesis

Berner, Sebastian (2012)
Strategien zur Qualitätssteigerung flexibler Rollprofile.
Technische Universität
Ph.D. Thesis, Primary publication

Bäcker, Frederic (2015)
Formgebung mehrachsig starkgekrümmter Stahlbleche mit lastangepassten Versteifungsrippen.
Technische Universität
Ph.D. Thesis, Primary publication

Görtan, Mehmet Okan (2014)
Severe plastic deformation of metallic materials by equal channel angular swaging: Theory, experiment and numerical simulation.
Technische Universität
Ph.D. Thesis, Primary publication

Niessen, Martin Benedikt (2022)
Untersuchungen zur Robustheit von Kollisionsschweißprozessen bei minimalem Energieeintrag.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023008
Ph.D. Thesis, Primary publication, Publisher's Version

Wang, Tianbo (2023)
Flexibles Rollsicken - Ein analytisches Modell zur Auslegung faltenfreier Profile mit höhenveränderlichem Querschnitt.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023040
Ph.D. Thesis, Primary publication, Publisher's Version

Wu, Yutian (2023)
Wear control in sheet metal forming – detection and life span estimation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024371
Ph.D. Thesis, Primary publication, Publisher's Version

Journal

eds.: Kluy, Lukas ; Launert, Natalia ; Verein Deutscher Ingenieure, Bezirksverein Frankfurt-Darmstadt e.V. (2020)
Technik & Mensch: Wissensmanagement.
In: Technik & Mensch, 2020 (2)
doi: 10.25534/tuprints-00013223
Journal, Secondary publication