ed.: Groche, Peter (2023)
12. Fachtagung Walzprofilieren - 22.03.-23.03.2023.
12. Fachtagung Walzprofilieren. Darmstadt, Germany (22.03.2023-23.03.2023)
doi: 10.26083/tuprints-00023407
Conference or Workshop Item, Primary publication, Publisher's Version

eds.: Kluy, Lukas ; Launert, Natalia ; Verein Deutscher Ingenieure, Bezirksverein Frankfurt-Darmstadt e.V. (2020)
Technik & Mensch: Wissensmanagement.
In: Technik & Mensch, 2020, 2020 (2)
doi: 10.25534/tuprints-00013223
Journal, Secondary publication, Publisher's Version

eds.: Pelz, Peter F. ; Groche, Peter (2021)
Uncertainty in Mechanical Engineering : Proceedings of the 4th International Conference on Uncertainty in Mechanical Engineering (ICUME 2021), June 7–8, 2021.
International Conference on Uncertainty in Mechanical Engineering (ICUME 2021). (07.06.2021-08.06.2021)
doi: 10.26083/tuprints-00018917
Conference or Workshop Item, Secondary publication, Publisher's Version

eds.: Pelz, Peter F. ; Groche, Peter (2019)
Uncertainty in Mechanical Engineering III.
International Conference on Uncertainty in Mechanical Engineering. Darmstadt
Conference or Workshop Item, Primary publication

Al-Baradoni, Nassr ; Groche, Peter (2021)
Sensor Integrated Load-Bearing Structures: Measuring Axis Extension with DIC-Based Transducers.
In: Sensors, 2021, 21 (12)
doi: 10.26083/tuprints-00019383
Article, Secondary publication, Publisher's Version

Al-Baradoni, Nassr ; Krech, Martin ; Groche, Peter (2024)
In-process calibration of smart structures produced by incremental forming.
In: Production Engineering : Research and Development, 2021, 15 (1)
doi: 10.26083/tuprints-00023951
Article, Secondary publication, Publisher's Version

Al-Baradoni, Nassr Mohammed Mosleh (2024)
Image-based and structure-integrated sensor for multiaxial measurement of structure deformations.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028657
Ph.D. Thesis, Primary publication, Publisher's Version

Berner, Sebastian (2012)
Strategien zur Qualitätssteigerung flexibler Rollprofile.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Birk, Frederik ; Ali, Fares ; Weigold, Matthias ; Abele, Eberhard ; Schützer, Klaus (2024)
Lightweight hybrid CFRP design for machine tools with focus on simple manufacturing.
In: The International Journal of Advanced Manufacturing Technology, 2020, 108 (11-12)
doi: 10.26083/tuprints-00023868
Article, Secondary publication, Publisher's Version

Bäcker, Frederic (2015)
Formgebung mehrachsig starkgekrümmter Stahlbleche mit lastangepassten Versteifungsrippen.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Bütev Öcal, Ezgi ; Sajadifar, Seyed Vahid ; Sellner, Erik P. K. ; Vollmer, Malte ; Heidarzadeh, Akbar ; Zavašnik, Janez ; Niendorf, Thomas ; Groche, Peter (2024)
Functionally Graded AA7075 Components Produced via Hot Stamping: A Novel Process Design Inspired from Analysis of Microstructure and Mechanical Properties.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024683
Article, Secondary publication, Publisher's Version

Franceschi, A. ; Stahl, J. ; Kock, C. ; Selbmann, R. ; Ortmann-Ishkina, S. ; Jobst, A. ; Merklein, M. ; Kuhfuß, B. ; Bergmann, M. ; Behrens, B.-A. ; Volk, W. ; Groche, P. (2024)
Strategies for residual stress adjustment in bulk metal forming.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023446
Article, Secondary publication, Publisher's Version

Gally, Tristan ; Groche, Peter ; Hoppe, Florian ; Kuttich, Anja ; Matei, Alexander ; Pfetsch, Marc E. ; Rakowitsch, Martin ; Ulbrich, Stefan (2024)
Identification of model uncertainty via optimal design of experiments applied to a mechanical press.
In: Optimization and Engineering : International Multidisciplinary Journal to Promote Optimization Theory & Applications in Engineering Sciences, 2022, 23 (1)
doi: 10.26083/tuprints-00023488
Article, Secondary publication, Publisher's Version

Gerlitzky, C. ; Kuhn, C. ; Groche, P. ; Tran, T.H. ; Zhang, S. ; Peter, N.J. ; Rohwerder, M. (2024)
3D cold pressure welded components – From the bonding mechanisms to the production of high strength joints.
In: Materials Science & Engineering Technology - Materialwissenschaft und Werkstofftechnik, 2019, 50 (8)
doi: 10.26083/tuprints-00017430
Article, Secondary publication, Publisher's Version

Görtan, Mehmet Okan (2014)
Severe plastic deformation of metallic materials by equal channel angular swaging: Theory, experiment and numerical simulation.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Günzel, Janosch ; Hauß, Joachim ; Gaedigk, Christoph ; Bergmann, Jacqueline ; Groche, Peter (2022)
Development of a process chain for multi-stage sheet metal forming of high-strength aluminium alloys.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021475
Article, Secondary publication, Publisher's Version

Günzel, Janosch ; Hauß, Joachim ; Groche, Peter (2024)
Opportunities, Challenges, and Influencing Factors in the Forming of Preconditioned Semi‐Finished Products Made of EN AW‐6082 and ‐7075.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024699
Article, Secondary publication, Publisher's Version

Hol, J. ; Wiebenga, J.H. ; Hörning, M. ; Dietrich, F. ; Dane, C. (2024)
Advanced friction simulation of standardized friction tests: a numerical and experimental demonstrator.
In: Journal of Physics: Conference Series, 2016, 734 (3)
doi: 10.26083/tuprints-00020974
Article, Secondary publication, Publisher's Version

Hoppe, Florian ; Knoll, Maximilian ; Götz, Benedict ; Schaeffner, Maximilian ; Groche, Peter (2022)
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process.
In: Applied Mechanics and Materials, 2018, 885
doi: 10.26083/tuprints-00020444
Article, Secondary publication, Publisher's Version

Hu, Chengliang ; Volz, Stefan ; Groche, Peter ; Moreau, Philippe ; Launhardt, Jonas ; Benabbou, N. ; Saito, S. ; Chen, H. ; Kitamura, Kazuhiko ; Dubar, Laurent (2023)
Modeling of friction in cold forging considering a wide range of tribological conditions.
ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022. Mailand, Italien (11.09.2022-14.09.2022)
doi: 10.26083/tuprints-00023238
Conference or Workshop Item, Secondary publication, Publisher's Version

Hähn, Felix ; Weigold, Matthias (2024)
Hybrid compliance compensation for path accuracy enhancement in robot machining.
In: Production Engineering : Research and Development, 2020, 14 (4)
doi: 10.26083/tuprints-00023949
Article, Secondary publication, Publisher's Version

Jaeger, Fabian ; Franceschi, Alessandro ; Hoche, Holger ; Groche, Peter ; Oechsner, Matthias (2024)
Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023468
Article, Secondary publication, Publisher's Version

Kessler, Thomas Valentin (2024)
Krümmungsmessung und Regelung mehrstufiger Prozesse beim Drei-Rollen-Biegen von Profilen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026618
Ph.D. Thesis, Primary publication, Publisher's Version

Klinge, Lina ; Kluy, Lukas ; Spiegel, Christopher ; Siemers, Carsten ; Groche, Peter ; Coraça-Huber, Débora (2023)
Nanostructured Ti-13Nb-13Zr alloy for implant application — material scientific, technological, and biological aspects.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00024504
Article, Secondary publication, Publisher's Version

Knoll, Maximilian (2024)
Grundlagen des Lochwalzens von ebenen Blechen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024512
Ph.D. Thesis, Primary publication, Publisher's Version

Kott, Matthäus ; Echler, Daniel ; Groche, Peter (2024)
Methodological approach for the development of an operator assistance system for the press shop.
In: The International Journal of Advanced Manufacturing Technology, 2022, 119 (3-4)
doi: 10.26083/tuprints-00023457
Article, Secondary publication, Publisher's Version

Kramer, Philipp ; Groche, Peter (2019)
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
In: Lubricants, 2019, (2)
Article, Secondary publication, Publisher's Version

Kubik, Christian (2024)
Zuverlässige maschinelle Lernmodelle zur Zustandsdiagnose von Fertigungsprozessen am Beispiel des Stanzens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027831
Ph.D. Thesis, Primary publication, Publisher's Version

Mann, Arne ; Bürgel, Christoph ; Groche, Peter (2019)
A Modeling Strategy for Predicting the Properties of Paraffin Wax Actuators.
In: Actuators, 2018, 7 (4)
Article, Secondary publication, Publisher's Version

Mann, Arne ; Germann, Thiemo ; Ruiter, Mats ; Groche, Peter (2020)
The challenge of upscaling paraffin wax actuators.
In: Materials & Design, 2020, 190
doi: 10.25534/tuprints-00011600
Article, Secondary publication, Publisher's Version

Martin, Daniel M. ; Bäcker, Frederic ; Deusinger, Björn ; Kubik, Christian ; Gehringer, Philipp ; Schröder, Joana ; Groche, Peter (2022)
Design Guidelines for interlocked stator cores made of CoFe sheets.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021476
Article, Secondary publication, Publisher's Version

Molitor, Dirk Alexander (2024)
KI-gestützte Regelung von unsicherheitsbehafteten Umformprozessen auf redundanten Mehrpunkt-Servopressen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027854
Ph.D. Thesis, Primary publication, Publisher's Version

Moneke, Matthias ; Groche, Peter (2024)
The origin of end flare in roll formed profiles.
In: International Journal of Material Forming, 2021, 14 (6)
doi: 10.26083/tuprints-00023547
Article, Secondary publication, Publisher's Version

Niessen, Benedikt ; Schumacher, Eugen ; Lueg-Althoff, Jörn ; Bellmann, Jörg ; Böhme, Marcus ; Böhm, Stefan ; Tekkaya, A. Erman ; Beyer, Eckhard ; Leyens, Christoph ; Wagner, Martin Franz-Xaver ; Groche, Peter (2021)
Interface Formation during Collision Welding of Aluminum.
In: Metals, 2020, 10 (9)
doi: 10.26083/tuprints-00018646
Article, Secondary publication, Publisher's Version

Niessen, Martin Benedikt (2022)
Untersuchungen zur Robustheit von Kollisionsschweißprozessen bei minimalem Energieeintrag.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023008
Ph.D. Thesis, Primary publication, Publisher's Version

Pabst, Christian Bernd (2019)
Ursachen, Beeinflussung, Auswirkungen sowie Quantifizierung der Temperaturentwicklung in der Fügezone beim Kollisionsschweißen.
doi: 10.25534/tuprints-00009469
Book, Primary publication

Recklin, Viktor ; Dietrich, Felix ; Groche, Peter (2023)
In-situ-measurement of the friction coefficient in the deep drawing process.
In: Journal of Physics: Conference Series, 2017, 896 (1)
doi: 10.26083/tuprints-00020933
Article, Secondary publication, Publisher's Version

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2018)
Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming.
In: Lubricants, 2018, 6 (2)
Article, Secondary publication, Publisher's Version

Reichel, Maximilian ; Groche, Peter ; Gutfleisch, Oliver ; Schröder, Jörg (2024)
Impact of soft magnetic α‐Fe in hard Nd₂Fe₁₄B magnetic materials: A micromagnetic study.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027212
Article, Secondary publication, Publisher's Version

Ries, Florian ; Li, Yongxiang ; Nishad, Kaushal ; Janicka, Johannes ; Sadiki, Amsini (2019)
Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation.
In: Entropy, 2019, (2)
Article, Secondary publication, Publisher's Version

Rumpel, Guido
ed.: Rumpel, Guido (2013)
Entscheidungshilfe zur Auswahl Schlanker Produktionssysteme für die Montage von Werkzeugmaschinen.
Book, Primary publication

Sajadifar, Seyed Vahid ; Suckow, Timon ; Heider, Ben ; Oechsner, Matthias ; Groche, Peter ; Niendorf, Thomas (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version

Schell, Lukas ; Sellner, Erik ; Massold, Michael ; Groche, Peter (2023)
Tribology in Warm and Hot Aluminum Sheet Forming: Transferability of Strip Drawing Tests to Forming Trials.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024667
Article, Secondary publication, Publisher's Version

Sellner, Erik ; Xu, Yikai ; Groche, Peter (2023)
Extension of Process Limits in High‐Strength Aluminum Forming by Local Contact Heating.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024663
Article, Secondary publication, Publisher's Version

Suckow, Timon (2024)
Temperaturunterstützte Prozessketten zum Rollformen und Laserstrahlschweißen hochfester Profile aus der Aluminiumlegierung EN AW-7075.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026683
Ph.D. Thesis, Primary publication, Publisher's Version

Suckow, Timon ; Bütev Öcal, Ezgi ; Groche, Peter (2023)
A Comparative Study on the Production of a Hat Profile by Roll Forming and Stamping.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024698
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Schroeder, Julius ; Groche, Peter (2024)
Roll forming of a high strength AA7075 aluminum tube.
In: Production Engineering : Research and Development, 2021, 15 (3-4)
doi: 10.26083/tuprints-00023537
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Völkers, Stephan ; Bütev Öcal, Ezgi ; Grass, Markus ; Böhm, Stefan ; Groche, Peter (2022)
Effect of Shortened Post Weld Heat Treatment on the Laser Welded AA7075 Alloy.
In: Metals, 2022, 12 (3)
doi: 10.26083/tuprints-00021489
Article, Secondary publication, Publisher's Version

Volz, Stefan ; Launhardt, Jonas ; Groche, Peter (2024)
Advanced friction modelling in cold forging using machine learning.
57th International Cold Forging Group Plenary Meeting Proceeding (ICFG 2024). Busan, South Korea (22.09.2024-25.09.2024)
doi: 10.26083/tuprints-00028589
Conference or Workshop Item, Primary publication, Publisher's Version

Wang, Tianbo (2023)
Flexibles Rollsicken - Ein analytisches Modell zur Auslegung faltenfreier Profile mit höhenveränderlichem Querschnitt.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023040
Ph.D. Thesis, Primary publication, Publisher's Version

Wu, Yutian (2023)
Wear control in sheet metal forming – detection and life span estimation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024371
Ph.D. Thesis, Primary publication, Publisher's Version

Wu, Yutian ; Recklin, Viktor ; Groche, Peter (2022)
Strain Induced Surface Change in Sheet Metal Forming: Numerical Prediction, Influence on Friction and Tool Wear.
In: Journal of Manufacturing and Materials Processing, 2022, 5 (2)
doi: 10.26083/tuprints-00019588
Article, Secondary publication, Publisher's Version