2024

Al-Baradoni, Nassr ; Krech, Martin ; Groche, Peter (2024)
In-process calibration of smart structures produced by incremental forming.
In: Production Engineering : Research and Development, 2021, 15 (1)
doi: 10.26083/tuprints-00023951
Article, Secondary publication, Publisher's Version

Al-Baradoni, Nassr Mohammed Mosleh (2024)
Image-based and structure-integrated sensor for multiaxial measurement of structure deformations.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028657
Ph.D. Thesis, Primary publication, Publisher's Version

Birk, Frederik ; Ali, Fares ; Weigold, Matthias ; Abele, Eberhard ; Schützer, Klaus (2024)
Lightweight hybrid CFRP design for machine tools with focus on simple manufacturing.
In: The International Journal of Advanced Manufacturing Technology, 2020, 108 (11-12)
doi: 10.26083/tuprints-00023868
Article, Secondary publication, Publisher's Version

Bütev Öcal, Ezgi ; Sajadifar, Seyed Vahid ; Sellner, Erik P. K. ; Vollmer, Malte ; Heidarzadeh, Akbar ; Zavašnik, Janez ; Niendorf, Thomas ; Groche, Peter (2024)
Functionally Graded AA7075 Components Produced via Hot Stamping: A Novel Process Design Inspired from Analysis of Microstructure and Mechanical Properties.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024683
Article, Secondary publication, Publisher's Version

Franceschi, A. ; Stahl, J. ; Kock, C. ; Selbmann, R. ; Ortmann-Ishkina, S. ; Jobst, A. ; Merklein, M. ; Kuhfuß, B. ; Bergmann, M. ; Behrens, B.-A. ; Volk, W. ; Groche, P. (2024)
Strategies for residual stress adjustment in bulk metal forming.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023446
Article, Secondary publication, Publisher's Version

Gally, Tristan ; Groche, Peter ; Hoppe, Florian ; Kuttich, Anja ; Matei, Alexander ; Pfetsch, Marc E. ; Rakowitsch, Martin ; Ulbrich, Stefan (2024)
Identification of model uncertainty via optimal design of experiments applied to a mechanical press.
In: Optimization and Engineering : International Multidisciplinary Journal to Promote Optimization Theory & Applications in Engineering Sciences, 2022, 23 (1)
doi: 10.26083/tuprints-00023488
Article, Secondary publication, Publisher's Version

Gerlitzky, C. ; Kuhn, C. ; Groche, P. ; Tran, T.H. ; Zhang, S. ; Peter, N.J. ; Rohwerder, M. (2024)
3D cold pressure welded components – From the bonding mechanisms to the production of high strength joints.
In: Materials Science & Engineering Technology - Materialwissenschaft und Werkstofftechnik, 2019, 50 (8)
doi: 10.26083/tuprints-00017430
Article, Secondary publication, Publisher's Version

Günzel, Janosch ; Hauß, Joachim ; Groche, Peter (2024)
Opportunities, Challenges, and Influencing Factors in the Forming of Preconditioned Semi‐Finished Products Made of EN AW‐6082 and ‐7075.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024699
Article, Secondary publication, Publisher's Version

Hol, J. ; Wiebenga, J.H. ; Hörning, M. ; Dietrich, F. ; Dane, C. (2024)
Advanced friction simulation of standardized friction tests: a numerical and experimental demonstrator.
In: Journal of Physics: Conference Series, 2016, 734 (3)
doi: 10.26083/tuprints-00020974
Article, Secondary publication, Publisher's Version

Hähn, Felix ; Weigold, Matthias (2024)
Hybrid compliance compensation for path accuracy enhancement in robot machining.
In: Production Engineering : Research and Development, 2020, 14 (4)
doi: 10.26083/tuprints-00023949
Article, Secondary publication, Publisher's Version

Jaeger, Fabian ; Franceschi, Alessandro ; Hoche, Holger ; Groche, Peter ; Oechsner, Matthias (2024)
Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023468
Article, Secondary publication, Publisher's Version

Kessler, Thomas Valentin (2024)
Krümmungsmessung und Regelung mehrstufiger Prozesse beim Drei-Rollen-Biegen von Profilen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026618
Ph.D. Thesis, Primary publication, Publisher's Version

Knoll, Maximilian (2024)
Grundlagen des Lochwalzens von ebenen Blechen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024512
Ph.D. Thesis, Primary publication, Publisher's Version

Kott, Matthäus ; Echler, Daniel ; Groche, Peter (2024)
Methodological approach for the development of an operator assistance system for the press shop.
In: The International Journal of Advanced Manufacturing Technology, 2022, 119 (3-4)
doi: 10.26083/tuprints-00023457
Article, Secondary publication, Publisher's Version

Kubik, Christian (2024)
Zuverlässige maschinelle Lernmodelle zur Zustandsdiagnose von Fertigungsprozessen am Beispiel des Stanzens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027831
Ph.D. Thesis, Primary publication, Publisher's Version

Molitor, Dirk Alexander (2024)
KI-gestützte Regelung von unsicherheitsbehafteten Umformprozessen auf redundanten Mehrpunkt-Servopressen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027854
Ph.D. Thesis, Primary publication, Publisher's Version

Moneke, Matthias ; Groche, Peter (2024)
The origin of end flare in roll formed profiles.
In: International Journal of Material Forming, 2021, 14 (6)
doi: 10.26083/tuprints-00023547
Article, Secondary publication, Publisher's Version

Reichel, Maximilian ; Groche, Peter ; Gutfleisch, Oliver ; Schröder, Jörg (2024)
Impact of soft magnetic α‐Fe in hard Nd₂Fe₁₄B magnetic materials: A micromagnetic study.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027212
Article, Secondary publication, Publisher's Version

Suckow, Timon (2024)
Temperaturunterstützte Prozessketten zum Rollformen und Laserstrahlschweißen hochfester Profile aus der Aluminiumlegierung EN AW-7075.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026683
Ph.D. Thesis, Primary publication, Publisher's Version

Suckow, Timon ; Schroeder, Julius ; Groche, Peter (2024)
Roll forming of a high strength AA7075 aluminum tube.
In: Production Engineering : Research and Development, 2021, 15 (3-4)
doi: 10.26083/tuprints-00023537
Article, Secondary publication, Publisher's Version

Volz, Stefan ; Launhardt, Jonas ; Groche, Peter (2024)
Advanced friction modelling in cold forging using machine learning.
57th International Cold Forging Group Plenary Meeting Proceeding (ICFG 2024). Busan, South Korea (22.09.2024-25.09.2024)
doi: 10.26083/tuprints-00028589
Conference or Workshop Item, Primary publication, Publisher's Version

2023

ed.: Groche, Peter (2023)
12. Fachtagung Walzprofilieren - 22.03.-23.03.2023.
12. Fachtagung Walzprofilieren. Darmstadt, Germany (22.03.2023-23.03.2023)
doi: 10.26083/tuprints-00023407
Conference or Workshop Item, Primary publication, Publisher's Version

Hu, Chengliang ; Volz, Stefan ; Groche, Peter ; Moreau, Philippe ; Launhardt, Jonas ; Benabbou, N. ; Saito, S. ; Chen, H. ; Kitamura, Kazuhiko ; Dubar, Laurent (2023)
Modeling of friction in cold forging considering a wide range of tribological conditions.
ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022. Mailand, Italien (11.09.2022-14.09.2022)
doi: 10.26083/tuprints-00023238
Conference or Workshop Item, Secondary publication, Publisher's Version

Klinge, Lina ; Kluy, Lukas ; Spiegel, Christopher ; Siemers, Carsten ; Groche, Peter ; Coraça-Huber, Débora (2023)
Nanostructured Ti-13Nb-13Zr alloy for implant application — material scientific, technological, and biological aspects.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00024504
Article, Secondary publication, Publisher's Version

Recklin, Viktor ; Dietrich, Felix ; Groche, Peter (2023)
In-situ-measurement of the friction coefficient in the deep drawing process.
In: Journal of Physics: Conference Series, 2017, 896 (1)
doi: 10.26083/tuprints-00020933
Article, Secondary publication, Publisher's Version

Sajadifar, Seyed Vahid ; Suckow, Timon ; Heider, Ben ; Oechsner, Matthias ; Groche, Peter ; Niendorf, Thomas (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version

Schell, Lukas ; Sellner, Erik ; Massold, Michael ; Groche, Peter (2023)
Tribology in Warm and Hot Aluminum Sheet Forming: Transferability of Strip Drawing Tests to Forming Trials.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024667
Article, Secondary publication, Publisher's Version

Sellner, Erik ; Xu, Yikai ; Groche, Peter (2023)
Extension of Process Limits in High‐Strength Aluminum Forming by Local Contact Heating.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024663
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Bütev Öcal, Ezgi ; Groche, Peter (2023)
A Comparative Study on the Production of a Hat Profile by Roll Forming and Stamping.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024698
Article, Secondary publication, Publisher's Version

Wang, Tianbo (2023)
Flexibles Rollsicken - Ein analytisches Modell zur Auslegung faltenfreier Profile mit höhenveränderlichem Querschnitt.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023040
Ph.D. Thesis, Primary publication, Publisher's Version

Wu, Yutian (2023)
Wear control in sheet metal forming – detection and life span estimation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024371
Ph.D. Thesis, Primary publication, Publisher's Version

2022

Günzel, Janosch ; Hauß, Joachim ; Gaedigk, Christoph ; Bergmann, Jacqueline ; Groche, Peter (2022)
Development of a process chain for multi-stage sheet metal forming of high-strength aluminium alloys.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021475
Article, Secondary publication, Publisher's Version

Hoppe, Florian ; Knoll, Maximilian ; Götz, Benedict ; Schaeffner, Maximilian ; Groche, Peter (2022)
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process.
In: Applied Mechanics and Materials, 2018, 885
doi: 10.26083/tuprints-00020444
Article, Secondary publication, Publisher's Version

Martin, Daniel M. ; Bäcker, Frederic ; Deusinger, Björn ; Kubik, Christian ; Gehringer, Philipp ; Schröder, Joana ; Groche, Peter (2022)
Design Guidelines for interlocked stator cores made of CoFe sheets.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021476
Article, Secondary publication, Publisher's Version

Niessen, Martin Benedikt (2022)
Untersuchungen zur Robustheit von Kollisionsschweißprozessen bei minimalem Energieeintrag.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023008
Ph.D. Thesis, Primary publication, Publisher's Version

Suckow, Timon ; Völkers, Stephan ; Bütev Öcal, Ezgi ; Grass, Markus ; Böhm, Stefan ; Groche, Peter (2022)
Effect of Shortened Post Weld Heat Treatment on the Laser Welded AA7075 Alloy.
In: Metals, 2022, 12 (3)
doi: 10.26083/tuprints-00021489
Article, Secondary publication, Publisher's Version

Wu, Yutian ; Recklin, Viktor ; Groche, Peter (2022)
Strain Induced Surface Change in Sheet Metal Forming: Numerical Prediction, Influence on Friction and Tool Wear.
In: Journal of Manufacturing and Materials Processing, 2022, 5 (2)
doi: 10.26083/tuprints-00019588
Article, Secondary publication, Publisher's Version

2021

eds.: Pelz, Peter F. ; Groche, Peter (2021)
Uncertainty in Mechanical Engineering : Proceedings of the 4th International Conference on Uncertainty in Mechanical Engineering (ICUME 2021), June 7–8, 2021.
International Conference on Uncertainty in Mechanical Engineering (ICUME 2021). (07.06.2021-08.06.2021)
doi: 10.26083/tuprints-00018917
Conference or Workshop Item, Secondary publication, Publisher's Version

Al-Baradoni, Nassr ; Groche, Peter (2021)
Sensor Integrated Load-Bearing Structures: Measuring Axis Extension with DIC-Based Transducers.
In: Sensors, 2021, 21 (12)
doi: 10.26083/tuprints-00019383
Article, Secondary publication, Publisher's Version

Niessen, Benedikt ; Schumacher, Eugen ; Lueg-Althoff, Jörn ; Bellmann, Jörg ; Böhme, Marcus ; Böhm, Stefan ; Tekkaya, A. Erman ; Beyer, Eckhard ; Leyens, Christoph ; Wagner, Martin Franz-Xaver ; Groche, Peter (2021)
Interface Formation during Collision Welding of Aluminum.
In: Metals, 2020, 10 (9)
doi: 10.26083/tuprints-00018646
Article, Secondary publication, Publisher's Version

2020

eds.: Kluy, Lukas ; Launert, Natalia ; Verein Deutscher Ingenieure, Bezirksverein Frankfurt-Darmstadt e.V. (2020)
Technik & Mensch: Wissensmanagement.
In: Technik & Mensch, 2020, 2020 (2)
doi: 10.25534/tuprints-00013223
Journal, Secondary publication, Publisher's Version

Mann, Arne ; Germann, Thiemo ; Ruiter, Mats ; Groche, Peter (2020)
The challenge of upscaling paraffin wax actuators.
In: Materials & Design, 2020, 190
doi: 10.25534/tuprints-00011600
Article, Secondary publication, Publisher's Version

2019

eds.: Pelz, Peter F. ; Groche, Peter (2019)
Uncertainty in Mechanical Engineering III.
International Conference on Uncertainty in Mechanical Engineering. Darmstadt
Conference or Workshop Item, Primary publication

Kramer, Philipp ; Groche, Peter (2019)
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
In: Lubricants, 2019, (2)
Article, Secondary publication, Publisher's Version

Mann, Arne ; Bürgel, Christoph ; Groche, Peter (2019)
A Modeling Strategy for Predicting the Properties of Paraffin Wax Actuators.
In: Actuators, 2018, 7 (4)
Article, Secondary publication, Publisher's Version

Pabst, Christian Bernd (2019)
Ursachen, Beeinflussung, Auswirkungen sowie Quantifizierung der Temperaturentwicklung in der Fügezone beim Kollisionsschweißen.
doi: 10.25534/tuprints-00009469
Book, Primary publication

Ries, Florian ; Li, Yongxiang ; Nishad, Kaushal ; Janicka, Johannes ; Sadiki, Amsini (2019)
Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation.
In: Entropy, 2019, (2)
Article, Secondary publication, Publisher's Version

2018

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2018)
Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming.
In: Lubricants, 2018, 6 (2)
Article, Secondary publication, Publisher's Version

2015

Bäcker, Frederic (2015)
Formgebung mehrachsig starkgekrümmter Stahlbleche mit lastangepassten Versteifungsrippen.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

2014

Görtan, Mehmet Okan (2014)
Severe plastic deformation of metallic materials by equal channel angular swaging: Theory, experiment and numerical simulation.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

2013

Rumpel, Guido
ed.: Rumpel, Guido (2013)
Entscheidungshilfe zur Auswahl Schlanker Produktionssysteme für die Montage von Werkzeugmaschinen.
Book, Primary publication

2012

Berner, Sebastian (2012)
Strategien zur Qualitätssteigerung flexibler Rollprofile.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication