A

Al-Baradoni, Nassr ; Groche, Peter (2021):
Sensor Integrated Load-Bearing Structures: Measuring Axis Extension with DIC-Based Transducers. (Publisher's Version)
In: Sensors, 21 (12), e-ISSN 1424-8220,
DOI: 10.26083/tuprints-00019383,
[Article]

B

Berner, Sebastian (2012):
Strategien zur Qualitätssteigerung flexibler Rollprofile.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

Bäcker, Frederic (2015):
Formgebung mehrachsig starkgekrümmter Stahlbleche mit lastangepassten Versteifungsrippen.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

G

Görtan, Mehmet Okan (2014):
Severe plastic deformation of metallic materials by equal channel angular swaging: Theory, experiment and numerical simulation.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

Günzel, Janosch ; Hauß, Joachim ; Gaedigk, Christoph ; Bergmann, Jacqueline ; Groche, Peter (2022):
Development of a process chain for multi-stage sheet metal forming of high-strength aluminium alloys. (Publisher's Version)
In: IOP Conference Series: Materials Science and Engineering, 1238, IOP Publishing, e-ISSN 1757-899X,
DOI: 10.26083/tuprints-00021475,
[Article]

H

Hoppe, Florian ; Knoll, Maximilian ; Götz, Benedict ; Schaeffner, Maximilian ; Groche, Peter (2022):
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process. (Publisher's Version)
In: Applied Mechanics and Materials, 885, pp. 35-47. Trans Tech Publications, ISSN 1660-9336, e-ISSN 1662-7482,
DOI: 10.26083/tuprints-00020444,
[Article]

Hu, Chengliang ; Volz, Stefan ; Groche, Peter ; Moreau, Philippe ; Launhardt, Jonas ; Benabbou, N. ; Saito, S. ; Chen, H. ; Kitamura, Kazuhiko ; Dubar, Laurent (2023):
Modeling of friction in cold forging considering a wide range of tribological conditions. (Publisher's Version)
In: ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022, pp. 191-200,
Darmstadt, ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022, Mailand, Italien, 11.09.2022-14.09.2022, DOI: 10.26083/tuprints-00023238,
[Conference or Workshop Item]

K

Kramer, Philipp ; Groche, Peter (2019):
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
7, In: Lubricants, (2), MDPI, ISSN 2075-4442,
[Article]

M

Mann, Arne ; Bürgel, Christoph ; Groche, Peter (2018):
A Modeling Strategy for Predicting the Properties of Paraffin Wax Actuators.
In: Actuators, 7 (4), ISSN 2076-0825,
[Article]

Mann, Arne ; Germann, Thiemo ; Ruiter, Mats ; Groche, Peter (2020):
The challenge of upscaling paraffin wax actuators.
In: Materials & Design, 190, Elsevier, ISSN 02641275,
DOI: 10.25534/tuprints-00011600,
[Article]

Martin, Daniel M. ; Bäcker, Frederic ; Deusinger, Björn ; Kubik, Christian ; Gehringer, Philipp ; Schröder, Joana ; Groche, Peter (2022):
Design Guidelines for interlocked stator cores made of CoFe sheets. (Publisher's Version)
In: IOP Conference Series: Materials Science and Engineering, 1238, IOP Publishing, e-ISSN 1757-899X,
DOI: 10.26083/tuprints-00021476,
[Article]

N

Niessen, Benedikt ; Schumacher, Eugen ; Lueg-Althoff, Jörn ; Bellmann, Jörg ; Böhme, Marcus ; Böhm, Stefan ; Tekkaya, A. Erman ; Beyer, Eckhard ; Leyens, Christoph ; Wagner, Martin Franz-Xaver ; Groche, Peter (2021):
Interface Formation during Collision Welding of Aluminum. (Publisher's Version)
In: Metals, 10 (9), MDPI, ISSN 2075-4701,
DOI: 10.26083/tuprints-00018646,
[Article]

Niessen, Martin Benedikt (2022):
Untersuchungen zur Robustheit von Kollisionsschweißprozessen bei minimalem Energieeintrag. (Publisher's Version)
Darmstadt, Technische Universität Darmstadt,
DOI: 10.26083/tuprints-00023008,
[Ph.D. Thesis]

P

Pabst, Christian Bernd (2019):
Ursachen, Beeinflussung, Auswirkungen sowie Quantifizierung der Temperaturentwicklung in der Fügezone beim Kollisionsschweißen.
Darmstadt, Shaker Verlag GmbH, ISBN 978-3-8440-7073-6,
DOI: 10.25534/tuprints-00009469,
[Book]

R

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2018):
Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming.
6, In: Lubricants, (2), ISSN 2075-4442,
[Article]

Ries, Florian ; Li, Yongxiang ; Nishad, Kaushal ; Janicka, Johannes ; Sadiki, Amsini (2019):
Entropy Generation Analysis and Thermodynamic Optimization of Jet Impingement Cooling Using Large Eddy Simulation.
21, In: Entropy, (2), MDPI, ISSN 1099-4300,
[Article]

Rumpel, Guido
Rumpel, Guido (ed.) (2013):
Entscheidungshilfe zur Auswahl Schlanker Produktionssysteme für die Montage von Werkzeugmaschinen.
In: Schriftenreihe des PTW: "Innovation Fertigungstechnik", Aachen, Shaker, ISBN 978-3-8/440-1690-1,
[Book]

S

Suckow, Timon ; Völkers, Stephan ; Bütev Öcal, Ezgi ; Grass, Markus ; Böhm, Stefan ; Groche, Peter (2022):
Effect of Shortened Post Weld Heat Treatment on the Laser Welded AA7075 Alloy. (Publisher's Version)
In: Metals, 12 (3), MDPI, e-ISSN 2075-4701,
DOI: 10.26083/tuprints-00021489,
[Article]

W

Wang, Tianbo (2023):
Flexibles Rollsicken - Ein analytisches Modell zur Auslegung faltenfreier Profile mit höhenveränderlichem Querschnitt. (Publisher's Version)
Darmstadt, Technische Universität Darmstadt,
DOI: 10.26083/tuprints-00023040,
[Ph.D. Thesis]

Wu, Yutian ; Recklin, Viktor ; Groche, Peter (2022):
Strain Induced Surface Change in Sheet Metal Forming: Numerical Prediction, Influence on Friction and Tool Wear. (Publisher's Version)
In: Journal of Manufacturing and Materials Processing, 5 (2), MDPI, e-ISSN 2504-4494,
DOI: 10.26083/tuprints-00019588,
[Article]