TU Darmstadt / ULB / TUprints

Items where Subject is "600 Technology, medicine, applied sciences > 624 Civil engineering and environmental protection engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | Item Type | No Grouping
Number of items at this level (without sub-levels): 149.

Article

Rheinschmidt, Florian ; Felger, Julian ; Rosendahl, Philipp Laurens (2025)
A closed-form analytical variational approach to thermally induced thin-film delamination.
In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2024, 238 (14)
doi: 10.26083/tuprints-00027847
Article, Secondary publication, Publisher's Version

Broese, Carsten ; Tsakmakis, Charalampos ; Üngör, Özer (2025)
Consistent Euler–Bernoulli beam theory in statics for gradient elasticity based on Laplacians of stress and strain.
In: Mathematics and Mechanics of Solids, 2024, 29 (1)
doi: 10.26083/tuprints-00027141
Article, Secondary publication, Publisher's Version

El Ghadioui, Redouan ; Hiesch, Dominik ; Bujotzek, Lukas ; Proske, Tilo ; Graubner, Carl-Alexander (2024)
Structural behaviour of CFRP reinforced concrete members under monotonic and cyclic long-term loading.
In: Materials and Structures = Matériaux et Constructions, 2021, 54 (4)
doi: 10.26083/tuprints-00023584
Article, Secondary publication, Publisher's Version

Lazar, Markus ; Michelitsch, Thomas ; Agiasofitou, Eleni (2024)
Three-Dimensional Green Tensor of One-Dimensional Hexagonal Quasicrystals.
In: Crystals, 2024, 14 (12)
doi: 10.26083/tuprints-00028850
Article, Secondary publication, Publisher's Version

Harries, Leandro ; Kempf, David ; Scheidig, Matthias ; Schütz, Maximilan ; Middendorf, Moritz ; Uzar, Kazim ; Su, Xiaohui ; Böhm, Stefan ; Liu, Jia (2024)
Assessing Asphalt Pavement Pre-Compaction with Paver Screed Frequency Measurements.
In: Procedia Structural Integrity, 2024, 64
doi: 10.26083/tuprints-00028822
Article, Secondary publication, Publisher's Version

Scheidig, Matthias ; Uzar, Kazim ; Kempf, David ; Harries, Leandro ; Böhm, Stefan ; Liu, Jia (2024)
Load-Bearing Capacity Assessment of Traffic Superstructures for Roads and Tramways.
In: Procedia Structural Integrity, 2024, 64
doi: 10.26083/tuprints-00028823
Article, Secondary publication, Publisher's Version

Hoesch, Quirin ; Roller, Michael ; Schneider‐Jung, Fabio ; Linn, Joachim ; Müller, Ralf (2024)
Analysis and simulation of curved hoses under internal pressure — 3D continuum models.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2024, 24 (2)
doi: 10.26083/tuprints-00028269
Article, Secondary publication, Publisher's Version

Bohnen, Matthias ; Müller, Ralf (2024)
Topology optimization for precipitation hardening in ferroelectric material.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2024, 24 (2)
doi: 10.26083/tuprints-00028295
Article, Secondary publication, Publisher's Version

Yan, Sikang ; Jawaid, Arsalan ; Kerscher, Eberhard ; Seewig, Jörg ; Müller, Ralf (2024)
Model‐based analysis of the influence of surface roughness on fatigue processes.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2024, 24 (2)
doi: 10.26083/tuprints-00028301
Article, Secondary publication, Publisher's Version

Liu, Jia ; Böhm, Stefan ; Middendorf, Moritz (2024)
Erweiterte Schienenkompetenz an der Technischen Universität Darmstadt.
In: Deine Bahn, 2022, 50 (5)
doi: 10.26083/tuprints-00028562
Article, Secondary publication, Publisher's Version

Middendorf, Moritz ; Umbach, Cristin ; Liu, Jia ; Koenders, Eduardus A. B. (2024)
Contact area analysis of an asphalt-concrete boundary layer with X-ray computed tomography imaging.
In: Construction and Building Materials, 2024, 430
doi: 10.26083/tuprints-00028163
Article, Secondary publication, Publisher's Version

Liu, Jia ; Freudenstein, Stephan (2024)
Investigations on ballastless tracks in tunnel without reinforcement.
In: Electronic Journal of Structural Engineering, 2013, 13 (1)
doi: 10.26083/tuprints-00028162
Article, Secondary publication, Publisher's Version

Harries, Leandro ; Schütz, Maximilian ; Kempf, David ; Liu, Jia (2024)
Methods of Asphalt Petrology: Determination of Permeability.
In: International Journal of Civil Infrastructure, 2023, 6
doi: 10.26083/tuprints-00028160
Article, Secondary publication, Publisher's Version

Dietrich, Maximilian ; Ling, Kunxiong ; Schmid, Roland ; Song, Zhao ; Beidl, Christian (2024)
Design and evaluation of an engine-in-the-loop environment for developing plug-in hybrid electric vehicle operating strategies at conventional test benches.
In: Automotive and Engine Technology, 2021, 6 (3-4)
doi: 10.26083/tuprints-00023556
Article, Secondary publication, Publisher's Version

Dix, S. ; Müller, P. ; Schuler, C. ; Kolling, S. ; Schneider, J. (2024)
Digital image processing methods for the evaluation of optical anisotropy effects in tempered architectural glass using photoelastic measurements.
In: Glass Structures & Engineering, 2021, 6 (1)
doi: 10.26083/tuprints-00023553
Article, Secondary publication, Publisher's Version

Götzinger, Robert ; Hill, Maximillian ; Schabel, Samuel ; Schneider, Jens (2024)
Glass-paper-laminates: examination of manufacturing methods, properties and discussion of potentials.
In: Glass Structures & Engineering, 2021, 6 (1)
doi: 10.26083/tuprints-00023554
Article, Secondary publication, Publisher's Version

Berlinger, Marcel ; Kolling, Stefan ; Schneider, Jens (2024)
A generalized Anderson–Darling test for the goodness-of-fit evaluation of the fracture strain distribution of acrylic glass.
In: Glass Structures & Engineering, 2021, 6 (2)
doi: 10.26083/tuprints-00023552
Article, Secondary publication, Publisher's Version

Dierks, Christian ; Hagedorn, Tabea ; Mack, Theresa ; Zeller, Vanessa (2024)
Consequential life cycle assessment of demolition waste management in Germany.
In: Frontiers in Sustainability, 2024, 5
doi: 10.26083/tuprints-00027830
Article, Secondary publication, Publisher's Version

Lüling, Claudia ; Rucker-Gramm, Petra ; Weilandt, Agnes ; Beuscher, Johanna ; Nagel, Dominik ; Schneider, Jens ; Maier, Andreas ; Bauder, Hans-Jürgen ; Weimer, Timo (2024)
Advanced 3D Textile Applications for the Building Envelope.
In: Applied Composite Materials, 2022, 29 (1)
doi: 10.26083/tuprints-00023480
Article, Secondary publication, Publisher's Version

Formhals, Julian ; Kirschstein, Xenia ; Dahash, Abdulrahman ; Seib, Lukas ; Sass, Ingo (2024)
Development, validation and demonstration of a new Modelica pit thermal energy storage model for system simulation and optimization.
In: Geothermal Energy, 2024, 12
doi: 10.26083/tuprints-00027735
Article, Secondary publication, Publisher's Version

Kirschstein, Xenia ; Ohagen, Max ; Reber, Joscha ; Vardon, Philip. J. ; Bishara, Nadja (2024)
Regeneration of shallow borehole heat exchanger fields: A literature review.
In: Energy and Buildings, 2024, 317
doi: 10.26083/tuprints-00027734
Article, Secondary publication, Publisher's Version

Asfaw, Berhane Abrha ; Sakaguchi-Söder, Kaori ; Schiedek, Thomas ; Michelsen, Nils ; Bernstein, Anat ; Siebner, Hagar ; Schüth, Christoph (2024)
Isotopic evidence (δ¹³C, δ³⁷Cl, δ²H) for distinct transformation mechanisms of chloroform: Catalyzed H₂-water system vs. zero-valent iron (ZVI).
In: Journal of Environmental Chemical Engineering, 2023, 11 (3)
doi: 10.26083/tuprints-00027722
Article, Secondary publication, Publisher's Version

Petö, Márton ; Juhre, Daniel ; Eisenträger, Sascha (2024)
Code verification of non‐linear immersed boundary simulations using the method of manufactured solutions.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (4)
doi: 10.26083/tuprints-00027196
Article, Secondary publication, Publisher's Version

Müller, Henning ; Schlüter, Alexander ; Faust, Erik ; Müller, Ralf (2024)
On dynamic crack propagation in a lattice Boltzmann method for elastodynamics in 2D.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (3)
doi: 10.26083/tuprints-00027198
Article, Secondary publication, Publisher's Version

Bohnen, Matthias ; Müller, Ralf (2024)
Simulation of precipitate hardening in ferroelectric material.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2023, 23 (2)
doi: 10.26083/tuprints-00027211
Article, Secondary publication, Publisher's Version

Ukrainczyk, Neven ; Koenders, Eddie (2024)
Acid Neutralization Capacity of Metakaolin‐based Geopolymers.
In: ce/papers : Proceedings in Civil Engineering, 2023, 6 (6)
doi: 10.26083/tuprints-00027238
Article, Secondary publication, Publisher's Version

Steineck, Sonja ; Lange, Jörg (2024)
Influence of Temperature on the Behavior of Sandwich Panels.
In: ce/papers : Proceedings in Civil Engineering, 2023, 6 (3-4)
doi: 10.26083/tuprints-00027240
Article, Secondary publication, Publisher's Version

Thiedeitz, Mareike ; Crasselt, Claudia ; Xiao, Peng ; Ukrainczyk, Neven ; Schmidt, Wolfram ; Kränkel, Thomas (2024)
Multidisciplinary approach for the prediction of cement paste rheological properties: physical analysis, experimental rheology and microstructural modelling.
In: ce/papers : Proceedings in Civil Engineering, 2023, 6 (6)
doi: 10.26083/tuprints-00027239
Article, Secondary publication, Publisher's Version

Berger, Felix ; Ukrainczyk, Neven ; Bogner, Andreas ; Hirsch, Astrid ; Dehn, Frank ; Koenders, Eduardus (2024)
Thermodynamic Modeling of Sulfuric and Acetic Acid Attack on Hardened Cement Paste: Effect of Silica Fume.
In: ce/papers : Proceedings in Civil Engineering, 2023, 6 (6)
doi: 10.26083/tuprints-00027237
Article, Secondary publication, Publisher's Version

Schuster, Jürgen ; Ukrainczyk, Neven ; Koenders, Eddie ; Stöckl, Markus (2024)
Geopolymer Based Electrodes as New Class of Material for Electrochemical CO₂ Reduction.
In: ChemElectroChem, 2023, 10 (20)
doi: 10.26083/tuprints-00027242
Article, Secondary publication, Publisher's Version

Andrioli Medinilha-Carvalho, Talita ; Marques da Silva, Fernando Vítor ; Bre, Facundo ; Gimenez, Juan M. ; Chebel Labaki, Lucila (2024)
Experimental Study of Wind Pressures on Low-Rise H-Shaped Buildings.
In: Buildings, 2024, 14 (3)
doi: 10.26083/tuprints-00027137
Article, Secondary publication, Publisher's Version

Hou, Jiwei ; Hübner, Patrick ; Schmidt, Jakob ; Iwaszczuk, Dorota (2024)
Indoor Mapping with Entertainment Devices: Evaluating the Impact of Different Mapping Strategies for Microsoft HoloLens 2 and Apple iPhone 14 Pro.
In: Sensors, 2024, 24 (4)
doi: 10.26083/tuprints-00027157
Article, Secondary publication, Publisher's Version

Shakya, Sudan ; Schmüdderich, Christoph ; Machaček, Jan ; Prada-Sarmiento, Luis Felipe ; Wichtmann, Torsten (2024)
Influence of Sampling Methods on the Accuracy of Machine Learning Predictions Used for Strain-Dependent Slope Stability.
In: Geosciences, 2024, 14 (2)
doi: 10.26083/tuprints-00027161
Article, Secondary publication, Publisher's Version

Baehr, Julian ; Zenglein, Florian ; Sonnemann, Guido ; Lederer, Markus ; Schebek, Liselotte (2024)
Back in the Driver’s Seat: How New EU Greenhouse-Gas Reporting Schemes Challenge Corporate Accounting.
In: Sustainability, 2024, 16 (9)
doi: 10.26083/tuprints-00027339
Article, Secondary publication, Publisher's Version

Tsakmakis, Charalampos ; Broese, Carsten ; Sideris, Stergios Alexandros (2024)
Dynamics in Explicit Gradient Elasticity: Material Frame-Indifference, Boundary Conditions and Consistent Euler–Bernoulli Beam Theory.
In: Materials, 2024, 17 (8)
doi: 10.26083/tuprints-00027334
Article, Secondary publication, Publisher's Version

Chen, Zixuan ; Wang, Guojie ; Wei, Xikun ; Liu, Yi ; Duan, Zheng ; Hu, Yifan ; Jiang, Huiyan (2024)
Basin-Scale Daily Drought Prediction Using Convolutional Neural Networks in Fenhe River Basin, China.
In: Atmosphere, 2024, 15 (2)
doi: 10.26083/tuprints-00027215
Article, Secondary publication, Publisher's Version

Kissel, Michael ; Bach, Michael ; Schmalz, Britta (2024)
Evaluation of Baseflow Modeling with BlueM.Sim for Long-Term Hydrological Studies in the German Low Mountain Range of Hesse, Germany.
In: Hydrology, 2023, 10 (12)
doi: 10.26083/tuprints-00027232
Article, Secondary publication, Publisher's Version

Xiao, Peng ; Chen, Xi ; Cao, Donglin ; Yuan, Yong ; Dai, Ying ; Ukrainczyk, Neven ; Koenders, Eddie (2024)
Mathematical Modeling of Initial Exothermic Behavior and Thixotropic Properties in Nanoclay-Enhanced Cementitious Materials.
In: Materials, 2024, 17 (7)
doi: 10.26083/tuprints-00027126
Article, Secondary publication, Publisher's Version

Pfüller, Tim ; Hanson, Jutta (2024)
Analyse realer 110-kV-Lastverläufe für die zeitreihenbasierte probabilistische Lastflussrechnung in der Netzplanung unter Berücksichtigung der neuen Kundengruppe Rechenzentren.
In: e & i Elektrotechnik und Informationstechnik, 2021, 138 (8)
doi: 10.26083/tuprints-00023478
Article, Secondary publication, Publisher's Version

Viere, Tobias ; Amor, Ben ; Berger, Nicolas ; Fanous, Ruba Dolfing ; Arduin, Rachel Horta ; Keller, Regula ; Laurent, Alexis ; Loubet, Philippe ; Strothmann, Philip ; Weyand, Steffi ; Wright, Laurie ; Sonnemann, Guido (2024)
Teaching life cycle assessment in higher education.
In: The International Journal of Life Cycle Assessment, 2021, 26 (3)
doi: 10.26083/tuprints-00023942
Article, Secondary publication, Publisher's Version

Gruttmann, F. ; Wagner, W. (2024)
An advanced shell model for the analysis of geometrical and material nonlinear shells.
In: Computational Mechanics : Solids, Materials, Complex Fluids, Fluid-Structure-Interaction, Biological Systems, Micromechanics, Multiscale Mechanics, Additive Manufacturing, 2020, 66 (6)
doi: 10.26083/tuprints-00023911
Article, Secondary publication, Publisher's Version

Abdighahroudi, Mohammad Sajjad ; Schmidt, Torsten C. ; Lutze, Holger V. (2024)
Determination of free chlorine based on ion chromatography — application of glycine as a selective scavenger.
In: Analytical and Bioanalytical Chemistry, 2020, 412 (28)
doi: 10.26083/tuprints-00023871
Article, Secondary publication, Publisher's Version

Amstutz, Hans ; Vormwald, Michael (2024)
Elastic spherical inhomogeneity in an infinite elastic solid: an exact analysis by an engineering treatment of the problem based on the corresponding cavity solution.
In: Archive of Applied Mechanics, 2021, 91 (4)
doi: 10.26083/tuprints-00023442
Article, Secondary publication, Publisher's Version

Garcia, Carolina ; Ricken Marques, Verônica ; Pini Pereira, Priscila Pini ; Rocha Pompeu, Cassia ; Passos Okawa, Cristhiane Michiko ; Sereni Ildefonso, Jesner (2024)
Influência da configuração topográfica na ocorrência de alagamentos no município de Maringá, Paraná.
In: Revista Eletrônica em Gestão, Educação e Tecnologia Ambiental, 2015, 19
doi: 10.26083/tuprints-00026655
Article, Secondary publication, Publisher's Version

Apostolidi, Eftychia ; Liakopoulou, Efstathia ; Dritsos, Stephanos ; Waldmann-Diederich, Danièle (2024)
Ductility of RC Columns confined with FRP Sheets.
In: ce/papers : Proceedings in Civil Engineering, 2023, 6 (5)
doi: 10.26083/tuprints-00024679
Article, Secondary publication, Publisher's Version

Eisenträger, Sascha ; Kapuria, Santosh ; Jain, Mayank ; Zhang, Junqi (2024)
On the numerical properties of high‐order spectral (Euler‐Bernoulli) beam elements.
In: ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2023, 103 (9)
doi: 10.26083/tuprints-00024665
Article, Secondary publication, Publisher's Version

Harenberg, Stefan ; Pahn, Matthias ; Malárics‐Pfaff, Viktória ; Dehn, Frank ; Caggiano, Antonio ; Schicchi, Diego S. ; Yang, Sha ; Koenders, Eddie (2024)
Digital image correlation strain measurement of ultra‐high‐performance concrete‐prisms under static and cyclic bending‐tensile stress.
In: Structural Concrete, 2019, 20 (4)
doi: 10.26083/tuprints-00016721
Article, Secondary publication, Publisher's Version

David, Amrei ; Rodriguez, Ernesto Ruiz ; Schmalz, Britta (2024)
Importance of catchment hydrological processes and calibration of hydrological‐hydrodynamic rainfall‐runoff models in small rural catchments.
In: Journal of Flood Risk Management, 2023, 16 (3)
doi: 10.26083/tuprints-00024692
Article, Secondary publication, Publisher's Version

Badrkhani, Vahid ; Hiemstra, René R. ; Mika, Michał ; Schillinger, Dominik (2024)
A matrix‐free macro‐element variant of the hybridized discontinuous Galerkin method.
In: International Journal for Numerical Methods in Engineering, 2023, 124 (20)
doi: 10.26083/tuprints-00024660
Article, Secondary publication, Publisher's Version

Bat-Erdene, Purev-Erdene ; Pareek, Sanjay ; Koenders, Eddie ; Mankel, Christoph ; Löher, Max ; Xiao, Peng (2024)
Evaluation of the Thermal Performance of Fly Ash Foam Concrete Containing Phase Change Materials (PCMs).
In: Buildings, 2023, 13 (10)
doi: 10.26083/tuprints-00024639
Article, Secondary publication, Publisher's Version

Nazari Sam, Mona ; Schneider, Jens ; Lutze, Holger V. (2024)
Modelling Porous Cementitious Media with/without Integrated Latent Heat Storage: Application Scenario.
In: Energies, 2023, 16 (18)
doi: 10.26083/tuprints-00024641
Article, Secondary publication, Publisher's Version

Ngo, Le-Minh ; Kieu, Le Thi ; Hoang, Hai-Yen ; Nguyen, Hai-Binh (2024)
Experiences of Housing Adapted to Sea Level Rise and Applicability for Houses in the Can Gio District, Ho Chi Minh City, Vietnam.
In: Sustainability, 2020, 12 (9)
doi: 10.26083/tuprints-00016619
Article, Secondary publication, Publisher's Version

Deutscher, Melchior ; Tran, Ngoc Linh ; Scheerer, Silke (2024)
Experimental Investigations on the Temperature Increase of Ultra-High Performance Concrete under Fatigue Loading.
In: Applied Sciences, 2019, 9 (19)
doi: 10.26083/tuprints-00016239
Article, Secondary publication, Publisher's Version

Ukrainczyk, Neven ; Muthu, Murugan ; Vogt, Oliver ; Koenders, Eddie (2024)
Geopolymer, Calcium Aluminate, and Portland Cement-Based Mortars: Comparing Degradation Using Acetic Acid.
In: Materials, 2019, 12 (19)
doi: 10.26083/tuprints-00016237
Article, Secondary publication, Publisher's Version

Bormann, Helge ; De Brito, Mariana Madruga ; Charchousi, Despoina ; Chatzistratis, Dimitris ; David, Amrei ; Grosser, Paula Farina ; Kebschull, Jenny ; Konis, Alexandros ; Koutalakis, Paschalis ; Korali, Alkistis ; Krauzig, Naomi ; Meier, Jessica ; Meliadou, Varvara ; Meinhardt, Markus ; Munnelly, Kieran ; Stephan, Christiane ; De Vos, Leon Frederik ; Dietrich, Jörg ; Tzoraki, Ourania (2024)
Impact of Hydrological Modellers’ Decisions and Attitude on the Performance of a Calibrated Conceptual Catchment Model: Results from a ‘Modelling Contest’.
In: Hydrology, 2018, 5 (4)
doi: 10.26083/tuprints-00016645
Article, Secondary publication, Publisher's Version

González-Flórez, Cristina ; Klose, Martina ; Alastuey, Andrés ; Dupont, Sylvain ; Escribano, Jerónimo ; Etyemezian, Vicken ; Gonzalez-Romero, Adolfo ; Huang, Yue ; Kandler, Konrad ; Nikolich, George ; Panta, Agnesh ; Querol, Xavier ; Reche, Cristina ; Yus-Díez, Jesús ; Pérez García-Pando, Carlos (2024)
Insights into the size-resolved dust emission from field measurements in the Moroccan Sahara.
In: Atmospheric Chemistry and Physics, 2023, 23 (12)
doi: 10.26083/tuprints-00024772
Article, Secondary publication, Publisher's Version

Mankel, Christoph ; Caggiano, Antonio ; König, Andreas ; Said Schicchi, Diego ; Nazari Sam, Mona ; Koenders, Eddie (2024)
Modelling the Thermal Energy Storage of Cementitious Mortars Made with PCM-Recycled Brick Aggregates.
In: Materials, 2020, 13 (5)
doi: 10.26083/tuprints-00016107
Article, Secondary publication, Publisher's Version

Vogt, Oliver ; Ukrainczyk, Neven ; Ballschmiede, Conrad ; Koenders, Eddie (2024)
Reactivity and Microstructure of Metakaolin Based Geopolymers: Effect of Fly Ash and Liquid/Solid Contents.
In: Materials, 2019, 12 (21)
doi: 10.26083/tuprints-00015754
Article, Secondary publication, Publisher's Version

Jakob, Cordula ; Jansen, Daniel ; Ukrainczyk, Neven ; Koenders, Eddie ; Pott, Ursula ; Stephan, Dietmar ; Neubauer, Jürgen (2024)
Relating Ettringite Formation and Rheological Changes during the Initial Cement Hydration: A Comparative Study Applying XRD Analysis, Rheological Measurements and Modeling.
In: Materials, 2019, 12 (18)
doi: 10.26083/tuprints-00016232
Article, Secondary publication, Publisher's Version

Van Nimmen, Katrien ; Zhao, Guoping ; Seyfarth, André ; Van den Broeck, Peter (2024)
A Robust Methodology for the Reconstruction of the Vertical Pedestrian-Induced Load from the Registered Body Motion.
In: Vibration, 2018, 1 (2)
doi: 10.26083/tuprints-00016559
Article, Secondary publication, Publisher's Version

Deutscher, Melchior ; Tran, Ngoc Linh ; Scheerer, Silke (2024)
Experimental Investigations on Temperature Generation and Release of Ultra-High Performance Concrete during Fatigue Tests.
In: Applied Sciences, 2020, 10 (17)
doi: 10.26083/tuprints-00017029
Article, Secondary publication, Publisher's Version

Perko, Janez ; Ukrainczyk, Neven ; Šavija, Branko ; Phung, Quoc Tri ; Koenders, Eddie A. B. (2024)
Influence of Micro-Pore Connectivity and Micro-Fractures on Calcium Leaching of Cement Pastes — A Coupled Simulation Approach.
In: Materials, 2020, 13 (12)
doi: 10.26083/tuprints-00016970
Article, Secondary publication, Publisher's Version

Ukrainczyk, Neven ; Thiedeitz, Mareike ; Kränkel, Thomas ; Koenders, Eddie ; Gehlen, Christoph (2024)
Modeling SAOS Yield Stress of Cement Suspensions: Microstructure-Based Computational Approach.
In: Materials, 2020, 13 (12)
doi: 10.26083/tuprints-00016976
Article, Secondary publication, Publisher's Version

Fachinotti, Victor D. ; Bre, Facundo ; Mankel, Christoph ; Koenders, Eduardus A. B. ; Caggiano, Antonio (2024)
Optimization of Multilayered Walls for Building Envelopes Including PCM-Based Composites.
In: Materials, 2020, 13 (12)
doi: 10.26083/tuprints-00016978
Article, Secondary publication, Publisher's Version

Blat Belmonte, Benjamin ; Esser, Arved ; Weyand, Steffi ; Franke, Georg ; Schebek, Liselotte ; Rinderknecht, Stephan (2024)
Identification of the Optimal Passenger Car Vehicle Fleet Transition for Mitigating the Cumulative LifeCycle Greenhouse Gas Emissions until 2050.
In: Vehicles, 2020, 2 (1)
doi: 10.26083/tuprints-00022274
Article, Secondary publication, Publisher's Version

Izadifar, Mohammadreza ; Sánchez Dolado, Jorge ; Thissen, Peter ; Ayuela, Andres (2024)
Interactions between Reduced Graphene Oxide with Monomers of (Calcium) Silicate Hydrates: A First-Principles Study.
In: Nanomaterials, 2021, 11 (9)
doi: 10.26083/tuprints-00019550
Article, Secondary publication, Publisher's Version

Lange, Jörg ; Feucht, Thilo ; Erven, Maren (2024)
3D printing with steel - Additive Manufacturing for connections and structures.
In: Steel Construction : Design and Research, 2020, 13 (3)
doi: 10.26083/tuprints-00016169
Article, Secondary publication, Publisher's Version

Oltmanns, Johannes ; Sauerwein, David ; Dammel, Frank ; Stephan, Peter ; Kuhn, Christoph (2024)
Potential for waste heat utilization of hot‐water‐cooled data centers: A case study.
In: Energy Science & Engineering, 2020, 8 (5)
doi: 10.26083/tuprints-00016187
Article, Secondary publication, Publisher's Version

Grimm, Sören ; Lange, Jörg (2024)
Shell Structures Made of Curved Sandwich Panels: Assessment of the Load‐Bearing Capacity.
In: ce/papers : Proceedings in civil engineering, 2019, 3 (3-4)
doi: 10.26083/tuprints-00017452
Article, Secondary publication, Publisher's Version

Bosch, Alexander ; Vormwald, Michael (2023)
Modeling short crack propagation under variable structural and thermal loadings.
In: Fatigue & Fracture of Engineering Materials & Structures, 2021, 44 (6)
doi: 10.26083/tuprints-00021011
Article, Secondary publication, Publisher's Version

Yoshida, Keisuke ; Okuoka, Keijiro ; Miatto, Alessio ; Schebek, Liselotte ; Tanikawa, Hiroki (2023)
Estimation of Mining and Landfilling Activities with Associated Overburden through Satellite Data: Germany 2000−2010.
In: Resources, 2019, 8 (3)
doi: 10.26083/tuprints-00015682
Article, Secondary publication, Publisher's Version

Lorenzen, Steven Robert ; Berthold, Hagen ; Fritzsche, Max Johannes Alois ; Rupp, Maximilian Michael ; Riedel, Henrik ; Apostolidi, Eftychia ; Schneider, Jens (2023)
Long‐term validation of virtual sensing of a railway bridge with ballasted superstructure.
In: ce/papers, 2023, 6 (5)
doi: 10.26083/tuprints-00024682
Article, Secondary publication, Publisher's Version

Kuhn, Charlotte ; Müller, Ralf ; Klassen, Markus ; Gross, Dietmar (2023)
Numerical homogenization of the Eshelby tensor at small strains.
In: Mathematics and Mechanics of Solids, 2020, 25 (7)
doi: 10.26083/tuprints-00016969
Article, Secondary publication, Publisher's Version

Bremm, Sophia ; Rosendahl, Philipp L. ; Becker, Wilfried (2023)
Application of a reduced basis method for an efficient treatment of structural mechanics problems.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 2021, 20 (1)
doi: 10.26083/tuprints-00017825
Article, Secondary publication, Publisher's Version

Hofmann, Sebastian ; Tran, Ngoc Linh ; Proske, Tilo ; Graubner, Carl‐Alexander (2023)
Cracking behavior of basalt fibre reinforced polymer‐reinforced concrete: An approach for the determination of crack spacing and crack width.
In: Structural Concrete, 2020, 21 (5)
doi: 10.26083/tuprints-00017451
Article, Secondary publication, Publisher's Version

Kirschstein, Xenia ; Reber, Joscha ; Zeus, Rouven ; Schuster, Miriam ; Bishara, Nadja (2023)
Modelling of Floor Heating and Cooling in Residential Districts.
In: Energies, 2023, 16 (15)
doi: 10.26083/tuprints-00024496
Article, Secondary publication, Publisher's Version

Hellmers, Hendrik ; Kasmi, Zakaria ; Norrdine, Abdelmoumen ; Eichhorn, Andreas (2023)
Accurate 3D Positioning for a Mobile Platform in Non-Line-of-Sight Scenarios Based on IMU/Magnetometer Sensor Fusion.
In: Sensors, 2018, 18 (1)
doi: 10.26083/tuprints-00016370
Article, Secondary publication, Publisher's Version

Caggiano, Antonio ; Mankel, Christoph ; Koenders, Eddie (2023)
Reviewing Theoretical and Numerical Models for PCM-embedded Cementitious Composites.
In: Buildings, 2018, 9 (1)
doi: 10.26083/tuprints-00016402
Article, Secondary publication, Publisher's Version

Wang, Chun ; Ye, Guanlin ; Meng, Xiannan ; Wang, Yongqi ; Peng, Chong (2023)
A Eulerian−Lagrangian Coupled Method for the Simulation of Submerged Granular Column Collapse.
In: Journal of Marine Science and Engineering, 2021, 9 (6)
doi: 10.26083/tuprints-00019568
Article, Secondary publication, Publisher's Version

Yasuda, Shohei ; Suenaga, Toshikazu ; Orschler, Laura ; Agrawal, Shelesh ; Lackner, Susanne ; Terada, Akihiko (2023)
Metagenomic Insights Into Functional and Taxonomic Compositions of an Activated Sludge Microbial Community Treating Leachate of a Completed Landfill: A Pathway-Based Analysis.
In: Frontiers in Microbiology, 2021, 12
doi: 10.26083/tuprints-00019617
Article, Secondary publication, Publisher's Version

Rehm, Imke-Sophie ; Friesen, John ; Pouls, Kevin ; Busch, Christoph ; Taubenböck, Hannes ; Pelz, Peter F. (2023)
A Method for Modeling Urban Water Infrastructures Combining Geo-Referenced Data.
In: Water, 2021, 13 (16)
doi: 10.26083/tuprints-00019608
Article, Secondary publication, Publisher's Version

Schwarz, Maximilian ; Behnisch, Justus ; Trippel, Jana ; Engelhart, Markus ; Wagner, Martin (2023)
Oxygen Transfer in Two-Stage Activated Sludge Wastewater Treatment Plants.
In: Water, 2021, 13 (14)
doi: 10.26083/tuprints-00019621
Article, Secondary publication, Publisher's Version

Gilka-Bötzow, Albrecht ; Folino, Paula ; Maier, Andreas ; Koenders, Eduardus A. B. ; Caggiano, Antonio (2023)
Triaxial Failure Behavior of Highly Porous Cementitious Foams Used as Heat Insulation.
In: Processes, 2021, 9 (8)
doi: 10.26083/tuprints-00019535
Article, Secondary publication, Publisher's Version

Middendorf, Moritz ; Umbach, Cristin ; Böhm, Stefan ; Liu, Jia ; Middendorf, Bernhard (2023)
Comparative Study of 2D Petrographic and 3D X-ray Tomography Investigations of Air Voids in Asphalt.
In: Materials, 2023, 16 (3)
doi: 10.26083/tuprints-00023345
Article, Secondary publication, Publisher's Version

Gehring, Maximilian ; Rüppel, Uwe (2023)
Data fusion approach for a digital construction logistics twin.
In: Frontiers in Built Environment, 2023, 9
doi: 10.26083/tuprints-00023404
Article, Secondary publication, Publisher's Version

Grebner, Philipp ; Lange, Jörg (2023)
3D‐printing with steel on thin sheets for application in free form façade construction: welding process development and material properties.
In: ce/papers, 2023, 6 (3-4)
doi: 10.26083/tuprints-00024656
Article, Secondary publication, Publisher's Version

Kühn, Annalena ; Haugwitz, Christoph ; Hinrichs, Jan ; Kupnik, Mario ; Lange, Jörg (2023)
Investigating the impact of thermal stresses on blistering effects in sandwich panels.
In: ce/papers : Proceedings in civil engineering, 2023, 6 (3-4)
doi: 10.26083/tuprints-00024705
Article, Secondary publication, Publisher's Version

Kuntsche, Ina ; Lange, Jörg (2023)
Investigations on the material behaviour of weld seams for the use in finite element analyses.
In: ce/papers : Proceedings in civil engineering, 2023, 6 (3-4)
doi: 10.26083/tuprints-00024700
Article, Secondary publication, Publisher's Version

Waldschmitt, Benedikt ; Lange, Jörg (2023)
Robot supported Wire Arc Additive Manufacturing of Steel Columns.
In: ce/papers : Proceedings in civil engineering, 2023, 6 (3-4)
doi: 10.26083/tuprints-00024684
Article, Secondary publication, Publisher's Version

Aquilanti, Alessia ; Peralta, Ignacio ; Koenders, Eduardus A. B. ; Di Nicola, Giovanni (2023)
A Brief Review of the Latest Advancements of Massive Solar Thermal Collectors.
In: Energies, 2023, 16 (16)
doi: 10.26083/tuprints-00024495
Article, Secondary publication, Publisher's Version

Eslami, Hooman ; Jayasinghe, Laddu Bhagya ; Waldmann, Daniele (2023)
Experimental and Numerical Investigation of a Novel Demountable Timber-Concrete Composite Floor.
In: Buildings, 2023, 13 (7)
doi: 10.26083/tuprints-00024405
Article, Secondary publication, Publisher's Version

Weyand, Steffi ; Kawajiri, Kotaro ; Mortan, Claudiu ; Schebek, Liselotte (2023)
Scheme for generating upscaling scenarios of emerging functional materials based energy technologies in prospective LCA (UpFunMatLCA).
In: Journal of Industrial Ecology, 2023, 27 (3)
doi: 10.26083/tuprints-00024289
Article, Secondary publication, Publisher's Version

Hiesch, Dominik ; Proske, Tilo ; Graubner, Carl‐Alexander ; Bujotzek, Lukas ; El Ghadioui, Redouan (2023)
Theoretical and experimental investigation of the time‐dependent relaxation rates of GFRP and BFRP reinforcement bars.
In: Structural Concrete : Journal of the FIB, 2023, 24 (2)
doi: 10.26083/tuprints-00024307
Article, Secondary publication, Publisher's Version

Book

Liu, Jia (2024)
Einfluss der Schienenbefestigungskomponenten auf das laterale Verformungs- und Lastverteilungsverhalten der Schiene.
doi: 10.26083/tuprints-00028576
Book, Secondary publication, Publisher's Version

eds.: Schäfer, Stefan ; Bisevac, Nikola ; Institut für Konstruktives Gestalten und Baukonstruktion (2024)
KGBauko Reader Konstruktives Gestalten. Ergebnisse des Wintersemesters 2023/2024.
doi: 10.26083/tuprints-00026736
Book, Primary publication, Publisher's Version

Conference or Workshop Item

Kuhn, Alexander ; Langner, Eric ; Hülsbruch, Dennis ; Kallio, Emmi ; Soderholm, Alexander ; Barišić, Vesna ; Ströhle, Jochen ; Epple, Bernd (2024)
Experimental Investigation of Combustion Characteristics During Co-Combustion of Solid Recovered Fuel and Coal in a 1 MWth Circulating Fluidized Bed Reactor.
14th European Conference on Industrial Furnaces and Boilers (INFUB-14). Algarve, Portugal (02.04.2024-05.04.2024)
doi: 10.26083/tuprints-00028832
Conference or Workshop Item, Primary publication, Publisher's Version

Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Adaption of a 300 kWth Pilot Plant for Testing the Indirectly Heated Carbonate Looping Process for CO2 Capture from Lime and Cement Industry.
13th European Conference on Industrial Furnaces and Boilers (INFUB-13). Algarve, Portugal (19.04.2022-22.04.2022)
doi: 10.26083/tuprints-00028045
Conference or Workshop Item, Primary publication, Publisher's Version

Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Performance of a limestone-based coupled fluidized bed reactor system aiming CO2 capture in a 300 kWth pilot plant.
Fluidization XVII. Edinburgh, Scotland (21.05.2023-25.05.2023)
doi: 10.26083/tuprints-00028046
Conference or Workshop Item, Primary publication, Publisher's Version

Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Pilot testing of the indirectly heated carbonate looping process for CO2 capture from lime industry.
12th Mediterranean Combustion Symposium (MCS-12). Luxor, Egypt (23.01.2023-26.01.2023)
doi: 10.26083/tuprints-00028048
Conference or Workshop Item, Primary publication, Publisher's Version

Hofmann, Carina ; Greco-Coppi, Martin ; Walter, Diethelm ; Ströhle, Jochen ; Epple, Bernd (2024)
Pilot testing of the indirectly heated carbonate looping process for lime plants.
9th High Temperature Solid Looping Cycles Network Meeting (IEAGHGT). Piacenza, Italy (14.03.2023-15.03.2023)
doi: 10.26083/tuprints-00028047
Conference or Workshop Item, Primary publication, Publisher's Version

Hofmann, Carina ; Greco-Coppi, Martin ; Ströhle, Jochen ; Epple, Bernd (2024)
Operation of a 300 kWₜₕ Indirectly Heated Carbonate Looping Plant for CO₂ Capture from Lime Industry.
24th Fluidized Bed Conference. Gothenburg, Sweden (08.05.2022-11.05.2022)
doi: 10.26083/tuprints-00026550
Conference or Workshop Item, Primary publication, Publisher's Version

Greco-Coppi, Martin ; Dinkova, Anna ; Hofmann, Carina ; Walter, Diethelm ; Böge, Kyra ; Ströhle, Jochen ; Epple, Bernd (2024)
Design of a 2 MWₜₕ Indirectly Heated Carbonate Looping Demonstration Facility at a Lime Plant in Germany.
7th Post Combustion Capture Conference. Pittsburgh, Pennsylvania (25.09.2023-27.09.2023)
doi: 10.26083/tuprints-00026537
Conference or Workshop Item, Secondary publication, Publisher's Version

Greco-Coppi, Martin ; Hofmann, Carina ; Ströhle, Jochen ; Epple, Bernd (2024)
Negative CO₂ Emissions in the Lime Production Using an Indirectly Heated Carbonate Looping Process.
2nd International Conference on Negative CO₂ Emissions. Chalmers University of Technology, Gothenburg, Sweden (14.06.2022-17.06.2022)
doi: 10.26083/tuprints-00026539
Conference or Workshop Item, Secondary publication, Publisher's Version

Fritzsche, Max Johannes Alois ; Rupp, Maximilian Michael ; Lorenzen, Steven Robert ; Hofmann, Lucia ; Birmele, Lia ; Schneider, Jens (2023)
Inverse Identification of Cable Forces using its Modal Behavior by Direct and Non-Contact Vibration Measurements.
9th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering. Athen, Griechenland (12.06.2023-14.06.2023)
doi: 10.26083/tuprints-00024729
Conference or Workshop Item, Secondary publication, Publisher's Version

Hack, Jochen (2023)
A New Methodology to Assess the Ecosystem Service Potential of Urban Rivers in Developing Countries.
19th Annual American Ecological Engineering Society Meeting (AEES). Asheville, NC, USA (03.06.2019-06.06.2019)
doi: 10.26083/tuprints-00024375
Conference or Workshop Item, Secondary publication, Publisher's Version

Report

Schäfer, Stefan ; Bisevac, Nikola (2024)
3D-Printed Bridge at the Technical University of Darmstadt.
doi: 10.26083/tuprints-00028582
Report, Primary publication, Publisher's Version

Schäfer, Stefan ; Bisevac, Nikola (2024)
3D-gedruckte Brücke an der Technischen Universität Darmstadt.
doi: 10.26083/tuprints-00028593
Report, Primary publication, Publisher's Version

Greco-Coppi, Martin ; Hofmann, Carina ; Ströhle, Jochen (2024)
Advanced indirectly heated carbonate looping process (ANICA) – Final report.
doi: 10.26083/tuprints-00026729
Report, Secondary publication, Publisher's Version

Leštáková, Michaela ; Wright-Contreras, Lucía ; Schiermeyer, Leonie
eds.: Haselhorst Associates GmbH, LOEWE-Zentrum emergenCITY (2023)
Urbane Datenplattformen und Resilienz der Städte: Status quo in Deutschland und Empfehlungen für kommunale Akteure.
doi: 10.26083/tuprints-00024392
Report, Primary publication, Publisher's Version

Ph.D. Thesis

Steinbach, Cedric (2024)
Dynamische Adaption von Störfallprogrammen im S-Bahn-Verkehr.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028700
Ph.D. Thesis, Primary publication, Publisher's Version

Rebscher, Angela Janina (2024)
Bodenerosion durch Oberflächenabfluss - Analysen zur Veränderlichkeit der Erodibilität kohäsiver Böden.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028782
Ph.D. Thesis, Primary publication, Publisher's Version

Gottschling, Michael (2024)
Development of an equation based on physicochemical properties of plastic and polycyclic aromatic hydrocarbons (PAH) to predict plastic-water partition coefficients (log Kp-w) for PAHs.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028033
Ph.D. Thesis, Primary publication, Publisher's Version

Sambataro, Luciano (2024)
LCA modelling of Cement and Lime-based Construction Materials Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027797
Ph.D. Thesis, Primary publication, Publisher's Version

Fettke, Manuela (2024)
Ganzheitliche Analyse zur Bewertung der Restnutzungsdauer geschweißter und hybrider Eisenbahnbrücken der 1930er bis 1970er Jahre.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028093
Ph.D. Thesis, Primary publication, Publisher's Version

Erven, Maren (2024)
WAAM-Knoten im Stahlhochbau.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027899
Ph.D. Thesis, Primary publication, Publisher's Version

Xia, Lili (2024)
Development of a fingerprinting approach to determine the geographical origin of vegetable oils: A case study for rapeseed oil from Hesse (Germany).
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028015
Ph.D. Thesis, Primary publication, Publisher's Version

Üngör, Özer (2024)
Untersuchung eines Stoffgesetzes der impliziten Gradientenelastizität.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027788
Ph.D. Thesis, Primary publication, Publisher's Version

Barkhausen, Robin (2024)
Advancing the understanding and impact assessment of circular economy product legislation in the European Union.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027751
Ph.D. Thesis, Primary publication, Publisher's Version

Hanesch, Susanne (2024)
Erweiterung der Ökobilanzierung zur Bewertung zukünftiger Umweltauswirkungen von neuartigen Transporttechnologien am Beispiel elektrifizierter Flugzeuge.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027572
Ph.D. Thesis, Primary publication, Publisher's Version

Erbe, Alexander (2024)
Ein Konzept zur on-line Implementierung von analogen Messwerten innerhalb strukturmechanischer FEM-Simulationen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027564
Ph.D. Thesis, Primary publication, Publisher's Version

Panic, Darko (2024)
Thermodynamisch konsistente FE-Simulation des Ermüdungsrissfortschritts unter Berücksichtigung zyklischer Plastizitätseffekte und der Mechanik materieller Kräfte.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027382
Ph.D. Thesis, Primary publication, Publisher's Version

Heyden, Aaron von der (2024)
Untersuchungen zur Eignung von Zellstoff als Kernmaterial für Sandwichelemente.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027312
Ph.D. Thesis, Primary publication, Publisher's Version

Peters, Timon Alexander (2024)
Dünnglas - Prüfverfahren für Architekturanwendungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026974
Ph.D. Thesis, Primary publication, Publisher's Version

Üyümez, Bilal (2024)
Modulare Systemarchitektur für einen robusten vollautomatisierten Bahnbetrieb.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026671
Ph.D. Thesis, Primary publication, Publisher's Version

Laveglia, Agustin (2024)
Towards Net-Zero and Carbon-Negative Transformations in Lime-Based Construction Materials.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026734
Ph.D. Thesis, Primary publication, Publisher's Version

Herceg, Sina (2024)
Assessment of the ecological lifetime of photovoltaic systems considering aging effects, end-of-life and early replacement.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026735
Ph.D. Thesis, Primary publication, Publisher's Version

Nazari Sam, Mona (2024)
Enhancing Thermal Energy Storage in blended cementitious Composites through Sensible and Latent Heat Integration.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026680
Ph.D. Thesis, Primary publication, Publisher's Version

Silva, Carina da (2024)
ActiveSkin - Thermisch aktivierte Fassadensysteme im Industriesektor.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026579
Ph.D. Thesis, Primary publication, Publisher's Version

Demichele, Francesco (2024)
Hydrogeological and Geochemical Modelling of a seawater intrusion barrier in a coastal/island groundwater body.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026466
Ph.D. Thesis, Primary publication, Publisher's Version

Zimmermann, Adrian (2024)
Entwicklung eines Modells zur Berechnung von Kontaktwinkeln auf Zementstein unter Berücksichtigung der relativen Feuchte.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026547
Ph.D. Thesis, Primary publication, Publisher's Version

Lohrey, Tobias (2023)
Modellgestützter Ansatz zur Effektivitätsprognose von Stauraumspülungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024383
Ph.D. Thesis, Primary publication, Publisher's Version

Klein, Jonas (2023)
Schnittgrößenverteilung in statisch unbestimmten Betonbauteilen mit nichtmetallischer Bewehrung - Untersuchungen zur Zuverlässigkeit von Durchlaufsystemen großer Biegeschlankheit im Grenzzustand der Tragfähigkeit.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024569
Ph.D. Thesis, Primary publication, Publisher's Version

Zhang, Shifan (2023)
Investigation and development of power-generating building material systems based on air-cathode microbial fuel cell using Geobacter sulfurreducens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024516
Ph.D. Thesis, Primary publication, Publisher's Version

Weyand, Steffi (2023)
Methodology development for upscaling in prospective LCA: The case of perovskite solar cells as emerging functional material-based energy technology.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024546
Ph.D. Thesis, Primary publication, Publisher's Version

David, Amrei Gesine (2023)
Modeling of Rain-Related Inundation Areas in Small Rural Catchments Using the Direct Rainfall Method.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024374
Ph.D. Thesis, Primary publication, Publisher's Version

Aquilanti, Alessia (2023)
Experimental Characterization and Numerical Modelling of Solar Cooker Prototypes with Thermal Energy Storage.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024334
Ph.D. Thesis, Primary publication, Publisher's Version

Bensing, Katharina (2023)
Ethohydraulische Modellierung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024347
Ph.D. Thesis, Primary publication, Publisher's Version

Feucht, Thilo Johannes Ernst (2023)
Additive Fertigung von Anschlusselementen im Stahlbau mit dem Wire Arc Additive Manufacturing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024363
Ph.D. Thesis, Primary publication, Publisher's Version

Kleiner, Jonas (2023)
Ein Beitrag zur Entwicklung von Baustellenversorgungssystemen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024343
Ph.D. Thesis, Primary publication, Publisher's Version

Braun, Gerhard (2023)
Erarbeitung einer Methode zur Berechnung des Stauhöhenverlustes von Feinrechen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024262
Ph.D. Thesis, Primary publication, Publisher's Version

Herget, Christian (2023)
Kalksteinmehl als Betonzusatzstoff für umweltfreundliche Betone.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024348
Ph.D. Thesis, Primary publication, Publisher's Version

Zeulner, Julia (2023)
Modellierung des Energiebedarfs von Zerspanungsprozessen zur Unterstützung des lebenszyklusorientierten Carbon Accounting für Unternehmen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024077
Ph.D. Thesis, Primary publication, Publisher's Version

Kraemer, Anna-Katharina (2023)
Untersuchungen zu den Auswirkungen einer Feuerverzinkung auf die Ermüdungsfestigkeit von Bauteilen aus Stahl.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024073
Ph.D. Thesis, Primary publication, Publisher's Version

Händler, Pascal (2023)
Zur Anwendung der SPS-Technologie im Bahnbrückenbau.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024143
Ph.D. Thesis, Primary publication, Publisher's Version

Master Thesis

Bohmann, Leon (2024)
Entwicklung eines Modells zur Prognose der Bruchbilder von thermisch vorgespannten Gläsern bei unterschiedlicher Vorspannung und Lagerung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027606
Master Thesis, Primary publication, Publisher's Version

Suhre, Niklas (2024)
Developing and integrating scenarios in a virtual city.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028039
Master Thesis, Primary publication, Publisher's Version

Haile, Dawit (2024)
Kohlenstoffabscheidung und -nutzung in der Herstellung nachhaltiger Baumaterialien.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027366
Master Thesis, Primary publication, Publisher's Version

Bosse, Naomi (2024)
Untersuchung der bauphysikalischen Leistungsfähigkeit funktionalisierter Papiere im hygroskopischen Feuchtebereich.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027460
Master Thesis, Primary publication, Publisher's Version

Bachelor Thesis

Nowak, Emanuel Galileo (2024)
Optimization of Glass Plate Structures with Additive Manufacturing.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026956
Bachelor Thesis, Primary publication, Publisher's Version

This list was generated on Tue Dec 17 23:10:04 2024 CET.