B

Buhl, Stefan (2018)
Scale-resolving simulations of internal combustion engine flows.
Technische Universität
Ph.D. Thesis, Primary publication

D

Dietzsch, Felix (2018)
Tracking and analysis of flamelet structures in turbulent non-premixed combustion.
Technische Universität
Ph.D. Thesis, Primary publication

Dressler, Louis ; Nicolai, Hendrik ; Agrebi, Senda ; Ries, Florian ; Sadiki, Amsini (2022)
Computation of Entropy Production in Stratified Flames Based on Chemistry Tabulation and an Eulerian Transported Probability Density Function Approach.
In: Entropy, 2022, 24 (5)
doi: 10.26083/tuprints-00022558
Article, Secondary publication, Publisher's Version

F

Ferraro, Federica ; Gierth, Sandro ; Salenbauch, Steffen ; Han, Wang ; Hasse, Christian (2022)
Large eddy simulation of the Delft Adelaide Flame III using a quadrature-based method of moments.
European Combustion Meeting 2021. Naples, Italy and virtual (14.-15.04.2021)
doi: 10.26083/tuprints-00022572
Conference or Workshop Item, Secondary publication, Postprint

Frommater, Stefan (2018)
Phenomenological modelling of particulate emissions in direct injection spark ignition engines for driving cycle simulations.
Technische Universität
Ph.D. Thesis, Primary publication

G

Gierth, Sandro (2022)
Advanced flamelet tabulation strategies for Large Eddy Simulations of single- and multi-phase turbulent jet flames.
Technische Universität
doi: 10.26083/tuprints-00021122
Ph.D. Thesis, Primary publication, Publisher's Version

Gierth, Sandro ; Hartl, Sandra ; Pollack, Martin ; Hasse, Christian ; Hofmann, Uwe ; Zikoridse, Gennadi ; Rautenberg, Helge ; Will, Frank ; Hahn, Christoph ; Kureti, Sven (2022)
Urea Conversion for Low‐Temperature Selective Catalytic Reduction in a Swirled Diesel Exhaust Gas Configuration.
In: Chemical Engineering & Technology, 2022, 45 (4)
doi: 10.26083/tuprints-00021538
Article, Secondary publication, Publisher's Version

H

Haspel, Philip Michael (2023)
Comparison of turbulent reactive spray characteristics of different renewable fuels using Large Eddy Simulation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024726
Ph.D. Thesis, Primary publication, Publisher's Version

Heinrich, Arne ; Kuenne, Guido ; Ganter, Sebastian ; Hasse, Christian ; Janicka, Johannes (2023)
Investigation of the Turbulent Near Wall Flame Behavior for a Sidewall Quenching Burner by Means of a Large Eddy Simulation and Tabulated Chemistry.
In: Fluids, 2018, 3 (3)
doi: 10.26083/tuprints-00016710
Article, Secondary publication, Publisher's Version

L

Luo, Yujuan (2023)
Modeling and simulation of near-wall combustion of renewable fuels.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023365
Ph.D. Thesis, Primary publication, Publisher's Version

M

Meier, Vinzent (2023)
Modellierung und Berechnung der Strömungsvorgänge im Luftspalt einer permanentmagneterregten Synchronmaschine.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024381
Ph.D. Thesis, Primary publication, Publisher's Version

P

Pati, Andrea (2022)
Numerical investigation of the in-cylinder flow-spray-wall interactions in direct injection engines.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022861
Ph.D. Thesis, Primary publication, Publisher's Version

R

Ries, Florian (2019)
Numerical Modeling and Prediction of Irreversibilities in Sub- and Supercritical Turbulent Near-Wall Flows.
Technische Universität
Ph.D. Thesis, Primary publication

S

Schmitz, Robert ; Sirignano, Mariano ; Hasse, Christian ; Ferraro, Federica (2022)
Numerical Investigation on the Effect of the Oxymethylene Ether-3 (OME3) Blending Ratio in Premixed Sooting Ethylene Flames.
In: Frontiers in Mechanical Engineering, 2022, 7
doi: 10.26083/tuprints-00020796
Article, Secondary publication, Publisher's Version

V

von Koerber, Valerie (2020)
Untersuchung der dieselmotorischen Wirkkette in Hochdruckeinspritzkammern und Verbrennungsmotoren.
Technische Universität
doi: 10.25534/tuprints-00011811
Ph.D. Thesis, Primary publication

Ç

Çokuslu, Ömer H. ; Hasse, Christian ; Geigle, Klaus-Peter ; Ferraro, Federica (2022)
Soot Prediction in a Model Aero-Engine Combustor using a Quadrature-based Method of Moments.
Enabling Sustainability Through Aerospace Technology. San Diego, USA and virtual (03.-07.01.2022)
doi: 10.26083/tuprints-00022571
Conference or Workshop Item, Secondary publication, Postprint