2024

Franceschi, Alessandro ; Jaeger, Fabian ; Hoche, Holger ; Oechsner, Matthias ; Groche, Peter (2024)
Calibration of the residual stresses with an active die during the ejection phase of cold extrusion.
In: International Journal of Material Forming, 2021, 14 (2)
doi: 10.26083/tuprints-00024004
Article, Secondary publication, Publisher's Version

Gazenbiller, Eugen ; Arya, Visheet ; Reitz, Rüdiger ; Oechsner, Matthias ; Zheludkevich, Mikhail L. ; Höche, Daniel (2024)
Mechanistic insights into chemical corrosion of AA1050 in ethanol‐blended fuels with water contamination via phase field modeling.
In: Materials and Corrosion = Werkstoffe und Korrosion, 2024, 75 (9)
doi: 10.26083/tuprints-00028270
Article, Secondary publication, Publisher's Version

Hofmann, Marius ; Faß, Markus ; Eberhard, Andrea ; Klein, Macus ; Baumgartner, Jörg ; Oechsner, Matthias ; Melz, Tobias (2024)
Method of accumulation of preload loss of bolted joints due to rotational self-loosening caused by cyclic, transversal excitation.
In: Engineering Failure Analysis, 2024, 162
doi: 10.26083/tuprints-00028114
Article, Secondary publication, Publisher's Version

Filipovic, Jurica ; Beck, Katharina ; Kontermann, Christian ; Galetz, Mathias ; Oechsner, Matthias (2024)
Mechanical Characterization Potentials of Aluminide Diffusion Coatings on Molybdenum Substrates.
In: Advanced Engineering Materials, 2024, 26 (17)
doi: 10.26083/tuprints-00028290
Article, Secondary publication, Publisher's Version

Hoche, Holger ; Ulrich, Thomas ; Kaestner, Peter ; Oechsner, Matthias (2024)
Empowering PVD for corrosion protection : TiMgGdN coatings with game‐changing corrosion performance: A genuine competitor to electroplated chromium.
In: Vakuum in Forschung und Praxis, 2024, 36 (2)
doi: 10.26083/tuprints-00027122
Article, Secondary publication, Publisher's Version

Blug, Andreas ; Conrad, Fabian ; Bertz, Alexander ; Kontermann, Christian ; Carl, Daniel ; Oechsner, Matthias (2024)
Application of high‐performance DIC for a comprehensive evaluation of biaxial fatigue crack growth experiments.
In: Strain : An International Journal for Experimental Mechanics, 2023, 59 (6)
doi: 10.26083/tuprints-00027173
Article, Secondary publication, Publisher's Version

Sajadifar, Seyed Vahid ; Baumgartner, Jörg ; Krochmal, Marcel ; Maciolek, Andreas ; Klein, Marcus ; Rößer, Moritz ; Graß, Markus ; Fröck, Hannes ; Fehlbier, Martin ; Kessler, Olaf ; Böhm, Stefan ; Oechsner, Matthias ; Melz, Tobias ; Niendorf, Thomas (2024)
On the Monotonic and Cyclic Behavior of an Al‐Mg‐Zn‐Cu‐Si Compositionally Complex Alloy.
In: Advanced Engineering Materials, 2023, 25 (21)
doi: 10.26083/tuprints-00027253
Article, Secondary publication, Publisher's Version

Kempf, Andreas ; Klein, Marcus ; Oechsner, Matthias (2024)
Ermittlung der Grenzflächenpressung von Bauteilwerkstoffen in Schraubenverbindungen an Ringproben bei erhöhter Temperatur bis 300 °C.
In: Forschung im Ingenieurwesen = Engineering Research, 2020, 84 (4)
doi: 10.26083/tuprints-00023916
Article, Secondary publication, Publisher's Version

Jaeger, Fabian ; Franceschi, Alessandro ; Hoche, Holger ; Groche, Peter ; Oechsner, Matthias (2024)
Statistical analysis of the reproducibility of residual stress measurements in cold extruded parts.
In: Archive of Applied Mechanics, 2021, 91 (8)
doi: 10.26083/tuprints-00023468
Article, Secondary publication, Publisher's Version

Kraemer, Fabian ; Stähler, Michael ; Klein, Marcus ; Oechsner, Matthias (2024)
Einfluss von Schmierstoffsystemen auf die Ermüdungsbeanspruchbarkeit von Schraubenverbindungen.
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 2023, 54 (8)
doi: 10.26083/tuprints-00024664
Article, Secondary publication, Publisher's Version

Chandra, Caroline Karina ; Sommer, Niklas ; Heider, Ben ; Hatzky, Marcel ; Reitz, Rüdiger ; Böhm, Stefan ; Oechsner, Matthias (2024)
Influence of Friction Stir Weld Parameters on the Corrosion Susceptibility of EN AW‐7075 Weld Seam and Heat‐Affected Zone.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024701
Article, Secondary publication, Publisher's Version

2023

Sajadifar, Seyed Vahid ; Suckow, Timon ; Heider, Ben ; Oechsner, Matthias ; Groche, Peter ; Niendorf, Thomas (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version

Moeini, Ghazal ; Sajadifar, Seyed Vahid ; Engler, Tom ; Heider, Ben ; Niendorf, Thomas ; Oechsner, Matthias ; Böhm, Stefan (2023)
Effect of Friction Stir Processing on Microstructural, Mechanical, and Corrosion Properties of Al-Si12 Additive Manufactured Components.
In: Metals, 2020, 10 (1)
doi: 10.26083/tuprints-00016122
Article, Secondary publication, Publisher's Version

Megahed, Sandra ; Krämer, Karl Michael ; Kontermann, Christian ; Heinze, Christoph ; Udoh, Annett ; Weihe, Stefan ; Oechsner, Matthias (2023)
Micro-Twinning in IN738LC Manufactured with Laser Powder Bed Fusion.
In: Materials, 2023, 16 (17)
doi: 10.26083/tuprints-00024497
Article, Secondary publication, Publisher's Version

2022

Schönherr, Josef Arthur ; Duarte, Larissa ; Madia, Mauro ; Zerbst, Uwe ; Geilen, Max Benedikt ; Klein, Marcus ; Oechsner, Matthias (2022)
Robust Determination of Fatigue Crack Propagation Thresholds from Crack Growth Data.
In: Materials, 2022, 15 (14)
doi: 10.26083/tuprints-00021867
Article, Secondary publication, Publisher's Version

Musekamp, Jens ; Reiber, Thorsten ; Hoche, Holger Claus ; Oechsner, Matthias ; Weigold, Matthias ; Abele, Eberhard (2022)
Influence of LPBF-Surface Characteristics on Fatigue Properties of Scalmalloy®.
In: Metals, 2022, 11 (12)
doi: 10.26083/tuprints-00020284
Article, Secondary publication, Publisher's Version

Vu, Hoang Minh ; Meiniger, Steffen ; Ringel, Björn ; Hoche, Holger Claus ; Oechsner, Matthias ; Weigold, Matthias ; Schmitt, Matthias ; Schlick, Georg (2022)
Investigation of Material Properties of Wall Structures from Stainless Steel 316L Manufactured by Laser Powder Bed Fusion.
In: Metals, 2022, 12 (2)
doi: 10.26083/tuprints-00021025
Article, Secondary publication, Publisher's Version

Kraemer, Fabian ; Stähler, Michael ; Klein, Marcus ; Oechsner, Matthias (2022)
Influence of Lubrication Systems on the Fatigue Strength of Bolted Joints.
In: Applied Sciences, 2022, 12 (6)
doi: 10.26083/tuprints-00021108
Article, Secondary publication, Publisher's Version

Leininger, Dominik Sebastian ; Geilen, Max Benedikt ; Klein, Marcus ; Oechsner, Matthias (2022)
A New Method for the Calculation of Characteristics of Disc Springs with Trapezoidal Cross-Sections and Rounded Edges.
In: Materials, 2022, 15 (5)
doi: 10.26083/tuprints-00021466
Article, Secondary publication, Publisher's Version

2021

Zentgraf, Florian ; Johe, Pascal ; Hoche, Holger ; Göckel, Bernd ; Becker, S. ; Oechsner, Matthias ; Dreizler, Andreas (2021)
Assessment of the impact of multiple mild-steam decontaminations on the protection performance of disposable KN95 filtering facepiece respirators.
In: Infection Prevention in Practice, 2021, 3 (2)
doi: 10.26083/tuprints-00019343
Article, Secondary publication, Publisher's Version

Engler, Christopher Tom ; Sarmiento Klapper, Helmuth ; Oechsner, Matthias (2021)
On the Influence of the Microstructure upon the Fatigue and Corrosion Fatigue Behavior of UNS N07718.
In: Metals, 2021, 11 (1)
doi: 10.26083/tuprints-00019311
Article, Secondary publication, Publisher's Version

Geilen, Max Benedikt ; Schönherr, Josef Arthur ; Klein, Marcus ; Leininger, Dominik Sebastian ; Giertler, Alexander ; Krupp, Ulrich ; Oechsner, Matthias (2021)
On the Influence of Control Type and Strain Rate on the Lifetime of 50CrMo4.
In: Metals, 2020, 10 (11)
doi: 10.26083/tuprints-00019270
Article, Secondary publication, Publisher's Version

2020

Geilen, Max Benedikt ; Klein, Marcus ; Oechsner, Matthias (2020)
A Novel Algorithm for the Determination of Walker Damage in Loaded Disc Springs.
In: Materials, 2020, 13 (7)
doi: 10.25534/tuprints-00013507
Article, Secondary publication, Publisher's Version