TU Darmstadt / ULB / TUprints

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date
Number of items: 22.

Kott, Matthäus ; Echler, Daniel ; Groche, Peter (2024)
Methodological approach for the development of an operator assistance system for the press shop.
In: The International Journal of Advanced Manufacturing Technology, 2022, 119 (3-4)
doi: 10.26083/tuprints-00023457
Article, Secondary publication, Publisher's Version

Bütev Öcal, Ezgi ; Sajadifar, Seyed Vahid ; Sellner, Erik P. K. ; Vollmer, Malte ; Heidarzadeh, Akbar ; Zavašnik, Janez ; Niendorf, Thomas ; Groche, Peter (2024)
Functionally Graded AA7075 Components Produced via Hot Stamping: A Novel Process Design Inspired from Analysis of Microstructure and Mechanical Properties.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024683
Article, Secondary publication, Publisher's Version

Günzel, Janosch ; Hauß, Joachim ; Groche, Peter (2024)
Opportunities, Challenges, and Influencing Factors in the Forming of Preconditioned Semi‐Finished Products Made of EN AW‐6082 and ‐7075.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024699
Article, Secondary publication, Publisher's Version

Sajadifar, Seyed Vahid ; Suckow, Timon ; Heider, Ben ; Oechsner, Matthias ; Groche, Peter ; Niendorf, Thomas (2023)
Cooling rate as a process parameter in advanced roll forming to tailor microstructure, mechanical and corrosion properties of EN AW 7075 tubes.
In: Materials Science & Engineering Technology : Materialwissenschaft und Werkstofftechnik, 2022, 53 (12)
doi: 10.26083/tuprints-00023709
Article, Secondary publication, Publisher's Version

Recklin, Viktor ; Dietrich, Felix ; Groche, Peter (2023)
In-situ-measurement of the friction coefficient in the deep drawing process.
In: Journal of Physics: Conference Series, 2017, 896 (1)
doi: 10.26083/tuprints-00020933
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Bütev Öcal, Ezgi ; Groche, Peter (2023)
A Comparative Study on the Production of a Hat Profile by Roll Forming and Stamping.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024698
Article, Secondary publication, Publisher's Version

Sellner, Erik ; Xu, Yikai ; Groche, Peter (2023)
Extension of Process Limits in High‐Strength Aluminum Forming by Local Contact Heating.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024663
Article, Secondary publication, Publisher's Version

Schell, Lukas ; Sellner, Erik ; Massold, Michael ; Groche, Peter (2023)
Tribology in Warm and Hot Aluminum Sheet Forming: Transferability of Strip Drawing Tests to Forming Trials.
In: Advanced Engineering Materials, 2023, 25 (15)
doi: 10.26083/tuprints-00024667
Article, Secondary publication, Publisher's Version

Klinge, Lina ; Kluy, Lukas ; Spiegel, Christopher ; Siemers, Carsten ; Groche, Peter ; Coraça-Huber, Débora (2023)
Nanostructured Ti-13Nb-13Zr alloy for implant application — material scientific, technological, and biological aspects.
In: Frontiers in Bioengineering and Biotechnology, 2023, 11
doi: 10.26083/tuprints-00024504
Article, Secondary publication, Publisher's Version

Pelz, Peter F. ; Groche, Peter ; Pfetsch, Marc E. ; Schäffner, Maximilian Frederic (2023)
Mastering Uncertainty in Mechanical Engineering.
doi: 10.26083/tuprints-00023754
Book, Secondary publication, Publisher's Version

Hu, Chengliang ; Volz, Stefan ; Groche, Peter ; Moreau, Philippe ; Launhardt, Jonas ; Benabbou, N. ; Saito, S. ; Chen, H. ; Kitamura, Kazuhiko ; Dubar, Laurent (2023)
Modeling of friction in cold forging considering a wide range of tribological conditions.
ICFG - International Cold Forging Group 55th Plenary Meeting, Milan - Italy 2022. Mailand, Italien (11.09.2022-14.09.2022)
doi: 10.26083/tuprints-00023238
Conference or Workshop Item, Secondary publication, Publisher's Version

Martin, Daniel M. ; Bäcker, Frederic ; Deusinger, Björn ; Kubik, Christian ; Gehringer, Philipp ; Schröder, Joana ; Groche, Peter (2022)
Design Guidelines for interlocked stator cores made of CoFe sheets.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021476
Article, Secondary publication, Publisher's Version

Günzel, Janosch ; Hauß, Joachim ; Gaedigk, Christoph ; Bergmann, Jacqueline ; Groche, Peter (2022)
Development of a process chain for multi-stage sheet metal forming of high-strength aluminium alloys.
In: IOP Conference Series: Materials Science and Engineering, 2022, 1238
doi: 10.26083/tuprints-00021475
Article, Secondary publication, Publisher's Version

Wu, Yutian ; Recklin, Viktor ; Groche, Peter (2022)
Strain Induced Surface Change in Sheet Metal Forming: Numerical Prediction, Influence on Friction and Tool Wear.
In: Journal of Manufacturing and Materials Processing, 2022, 5 (2)
doi: 10.26083/tuprints-00019588
Article, Secondary publication, Publisher's Version

Suckow, Timon ; Völkers, Stephan ; Bütev Öcal, Ezgi ; Grass, Markus ; Böhm, Stefan ; Groche, Peter (2022)
Effect of Shortened Post Weld Heat Treatment on the Laser Welded AA7075 Alloy.
In: Metals, 2022, 12 (3)
doi: 10.26083/tuprints-00021489
Article, Secondary publication, Publisher's Version

Hoppe, Florian ; Knoll, Maximilian ; Götz, Benedict ; Schaeffner, Maximilian ; Groche, Peter (2022)
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process.
In: Applied Mechanics and Materials, 885
doi: 10.26083/tuprints-00020444
Article, Secondary publication, Publisher's Version

Al-Baradoni, Nassr ; Groche, Peter (2021)
Sensor Integrated Load-Bearing Structures: Measuring Axis Extension with DIC-Based Transducers.
In: Sensors, 2021, 21 (12)
doi: 10.26083/tuprints-00019383
Article, Secondary publication, Publisher's Version

Niessen, Benedikt ; Schumacher, Eugen ; Lueg-Althoff, Jörn ; Bellmann, Jörg ; Böhme, Marcus ; Böhm, Stefan ; Tekkaya, A. Erman ; Beyer, Eckhard ; Leyens, Christoph ; Wagner, Martin Franz-Xaver ; Groche, Peter (2021)
Interface Formation during Collision Welding of Aluminum.
In: Metals, 2020, 10 (9)
doi: 10.26083/tuprints-00018646
Article, Secondary publication, Publisher's Version

Mann, Arne ; Germann, Thiemo ; Ruiter, Mats ; Groche, Peter (2020)
The challenge of upscaling paraffin wax actuators.
In: Materials & Design, 2020, 190
doi: 10.25534/tuprints-00011600
Article, Secondary publication

Mann, Arne ; Bürgel, Christoph ; Groche, Peter (2019)
A Modeling Strategy for Predicting the Properties of Paraffin Wax Actuators.
In: Actuators, 2018, 7 (4)
Article, Secondary publication

Kramer, Philipp ; Groche, Peter (2019)
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
In: Lubricants, 2019, (2)
Article, Secondary publication

Recklin, Viktor ; Dietrich, Florian ; Groche, Peter (2018)
Influence of Test Stand and Contact Size Sensitivity on the Friction Coefficient in Sheet Metal Forming.
In: Lubricants, 2018, 6 (2)
Article, Secondary publication

This list was generated on Fri Mar 29 00:01:54 2024 CET.