Items where Division is "16 Department of Mechanical Engineering > Fluid Mechanics and Aerodynamics (SLA) > Dynamics of drops and sprays" and Year is [pin missing: value2]
Up a level |
- TU Darmstadt (18)
- 16 Department of Mechanical Engineering (18)
- Fluid Mechanics and Aerodynamics (SLA) (18)
- Dynamics of drops and sprays (18)
- MRV (2)
- Dynamics of drops and sprays (18)
- Fluid Mechanics and Aerodynamics (SLA) (18)
- 16 Department of Mechanical Engineering (18)
2024
Gajević Joksimović, Marija (2024)
From Single Drop to Spray Cooling: Influence of Lubricant Addition on Heat Transfer.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026647
Ph.D. Thesis, Primary publication, Publisher's Version
Maliha, Malki ; Stumpf, Bastian ; Beyer, Felix ; Kühnert, Marius ; Kubach, Heiko ; Roisman, Ilia ; Hussong, Jeanette ; Koch, Thomas (2024)
Optical investigation on the interaction between a fuel-spray and an oil wetted wall with the focus on secondary droplets.
In: International Journal of Engine Research, 2022, 24 (4)
doi: 10.26083/tuprints-00023666
Article, Secondary publication, Publisher's Version
Schmidt, Johannes Benedikt (2024)
Transitional Boiling Phenomena in Single Drop Impact and Spray Cooling.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027886
Ph.D. Thesis, Primary publication, Publisher's Version
2023
Apell, Niklas (2023)
Supersonic Close-coupled Atomization: Experimental Insights.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024473
Ph.D. Thesis, Primary publication, Publisher's Version
2022
Gloerfeld, Mark Gideon (2022)
Hydrodynamics of Supercooled Drops Encountering Solidification at Various Moments of Impact.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022996
Ph.D. Thesis, Primary publication, Publisher's Version
2020
Tenzer, Fabian Michael (2020)
Heat transfer during transient spray cooling: An experimental and analytical study.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00011344
Ph.D. Thesis, Primary publication
Unkelbach, Wilhelm (2020)
Implementation of a method for the inverse calculation of the heat flux during the impact of a drop chain onto a heated surface.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00014185
Bachelor Thesis, Primary publication
2019
Ade, Michael (2019)
Development of a Numerical Methodology for Water Management Simulations of Passenger Cars.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Kittel, Hannah Maria (2019)
Drop Impact onto a Wall Wetted by a Thin Film of Another Liquid.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Kuhnhenn, Maximilian (2019)
Rotary Atomizer: Investigation of the Internal and External Liquid Flow and Atomization.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Rettenmaier, Daniel (2019)
Numerical Simulation of Shear Driven Wetting.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Seiler, Patrick M. (2019)
Aerodynamically driven wall-bounded drop motion and rivulet formation.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
2018
Breitenbach, Jan (2018)
Drop and spray impact onto a hot substrate: Dynamics and heat transfer.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
2017
Mantel, Regine (2017)
Über die Interaktion fast paralleler sowie kollidierender Kraftstoffsprays.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
2016
Golzke, Hendrik (2016)
Infrarotmesstechniken in der Otto-Motoren-Forschung.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
2013
Bürkle, Sebastian (2013)
Environmental Impacts on Dielectric Barrier Discharge Plasma Actuators.
Technische Universität Darmstadt
Master Thesis, Primary publication