Items where Division is "11 Department of Materials and Earth Sciences > Earth Science > Engineering Geology" and Year is [pin missing: value2]
Up a level |
- TU Darmstadt (17)
- 11 Department of Materials and Earth Sciences (17)
- Earth Science (17)
- Engineering Geology (17)
- Earth Science (17)
- 11 Department of Materials and Earth Sciences (17)
Article
Ahlers, Steffen ; Henk, Andreas ; Hergert, Tobias ; Reiter, Karsten ; Müller, Birgit ; Röckel, Luisa ; Heidbach, Oliver ; Morawietz, Sophia ; Scheck-Wenderoth, Magdalena ; Anikiev, Denis (2021)
3D crustal stress state of Germany according to a data-calibrated geomechanical model.
In: Solid Earth, 2021, 12 (8)
doi: 10.26083/tuprints-00019651
Article, Secondary publication, Publisher's Version
Morawietz, Sophia ; Heidbach, Oliver ; Reiter, Karsten ; Ziegler, Moritz ; Rajabi, Mojtaba ; Zimmermann, Günter ; Müller, Birgit ; Tingay, Mark (2024)
An open-access stress magnitude database for Germany and adjacent regions.
In: Geothermal Energy : Science – Society – Technology, 2020, 8 (1)
doi: 10.26083/tuprints-00024037
Article, Secondary publication, Publisher's Version
Reiter, Karsten ; Heidbach, Oliver ; Ziegler, Moritz O. (2024)
Impact of faults on the remote stress state.
In: Solid Earth, 2024, 15 (2)
doi: 10.26083/tuprints-00027296
Article, Secondary publication, Publisher's Version
Rudolf, Michael ; Rosenau, Matthias ; Oncken, Onno (2023)
The Spectrum of Slip Behaviors of a Granular Fault Gouge Analogue Governed by Rate and State Friction.
In: Geochemistry, Geophysics, Geosystems, 2021, 22 (12)
doi: 10.26083/tuprints-00020990
Article, Secondary publication, Publisher's Version
Treffeisen, Torben ; Henk, Andreas (2021)
Elastic and Frictional Properties of Fault Zones in Reservoir-Scale Hydro-Mechanical Models - A Sensitivity Study.
In: Energies, 2021, 13 (18)
doi: 10.26083/tuprints-00018656
Article, Secondary publication, Publisher's Version
Treffeisen, Torben ; Henk, Andreas (2023)
Faults as Volumetric Weak Zones in Reservoir-Scale Hydro-Mechanical Finite Element Models — A Comparison Based on Grid Geometry, Mesh Resolution and Fault Dip.
In: Energies, 2020, 13 (10)
doi: 10.26083/tuprints-00016987
Article, Secondary publication, Publisher's Version
Zain-Ul-Abedin, Muhammad ; Henk, Andreas (2021)
Building 1D and 3D Mechanical Earth Models for Underground Gas Storage - A Case Study from the Molasse Basin, Southern Germany.
In: Energies, 2020, 13 (21)
doi: 10.26083/tuprints-00018659
Article, Secondary publication, Publisher's Version
Ziegler, Moritz O. ; Seithel, Robin ; Niederhuber, Thomas ; Heidbach, Oliver ; Kohl, Thomas ; Müller, Birgit ; Rajabi, Mojtaba ; Reiter, Karsten ; Röckel, Luisa (2024)
Stress state at faults: the influence of rock stiffness contrast, stress orientation, and ratio.
In: Solid Earth, 2024, 15 (8)
doi: 10.26083/tuprints-00028031
Article, Secondary publication, Publisher's Version
Ph.D. Thesis
Ahlers, Steffen (2023)
Geomechanical-numerical modeling of the crustal stress state of Germany.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023029
Ph.D. Thesis, Primary publication, Publisher's Version
Aruffo, Chiara Maria (2015)
Geomechanical characterization of the CO2CRC Otway Project site, Australia.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Fischer, Karsten (2013)
Geomechanical reservoir modeling – workflow and case study from the North German Basin.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Gottron, Dominik (2022)
Concepts for upscaling hydromechanical properties of fractured rock masses - a comparison of classification schemes, discrete fracture network and synthetic rock mass models.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022459
Ph.D. Thesis, Primary publication, Publisher's Version
Guerra, Clairet (2019)
Stress and fracture prediction using geomechanical reservoir models - A case study from the Lower Magdalena Valley Basin, Colombia.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Haug, Constantin (2019)
Numerical modelling of production-induced stress changes and seismicity in fault-compartmentalized reservoirs of the North German Basin.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Laux, Dennis (2017)
Terrestrisches Laserscanning zur Quantifizierung von Trennflächenparametern für statistisch signifikante Discrete-Fracture-Network-Modelle.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication
Treffeisen, Torben (2021)
Fault Representation in Reservoir-Scale Hydro-Mechanical Finite Element Models.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00017419
Ph.D. Thesis, Primary publication, Publisher's Version
Zain-Ul-Abedin, Muhammad (2022)
Coupled Thermal-Hydraulic-Mechanical (THM) modelling of underground gas storage – A case study from the Molasse Basin, South Germany.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022537
Ph.D. Thesis, Primary publication, Publisher's Version