Items where Division is "16 Department of Mechanical Engineering > Institut für Produktionstechnik und Umformmaschinen (PtU) > Process chains and forming units" and Year is [pin missing: value2]
 | Up a level |
- TU Darmstadt (18)
- 16 Department of Mechanical Engineering (18)
- Institute for Production Engineering and Forming Machines (PtU) (18)
- Process chains and forming units (18)
- Institute for Production Engineering and Forming Machines (PtU) (18)
- 16 Department of Mechanical Engineering (18)
A
Al-Baradoni, Nassr ; Groche, Peter (2025)
Sensor-integrated structures in mechanical engineering: challenges and opportunities for mechanical joining processes.
In: Production Engineering : Research and Development, 2022, 16 (2-3)
doi: 10.26083/tuprints-00028546
Article, Secondary publication, Publisher's Version
Al-Baradoni, Nassr Mohammed Mosleh (2024)
Image-based and structure-integrated sensor for multiaxial measurement of structure deformations.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028657
Ph.D. Thesis, Primary publication, Publisher's Version
B
Breunig, Alexander Stefan (2024)
Tiefziehen mit kardanischem Niederhalter.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00028845
Ph.D. Thesis, Primary publication, Publisher's Version
G
Günzel, Janosch (2023)
Mehrstufige Umformung hochfester Aluminiumlegierungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026361
Ph.D. Thesis, Primary publication, Publisher's Version
K
Kubik, Christian ; Becker, Marco ; Molitor, Dirk-Alexander ; Groche, Peter (2025)
Towards a systematical approach for wear detection in sheet metal forming using machine learning.
In: Production Engineering : Research and Development, 2023, 17 (1)
doi: 10.26083/tuprints-00028480
Article, Secondary publication, Publisher's Version
M
Molitor, Dirk Alexander (2024)
KI-gestützte Regelung von unsicherheitsbehafteten Umformprozessen auf redundanten Mehrpunkt-Servopressen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00027854
Ph.D. Thesis, Primary publication, Publisher's Version
Molitor, Dirk Alexander ; Kubik, Christian ; Hetfleisch, Ruben Helmut ; Groche, Peter (2025)
Workpiece image-based tool wear classification in blanking processes using deep convolutional neural networks.
In: Production Engineering : Research and Development, 2022, 16 (4)
doi: 10.26083/tuprints-00028554
Article, Secondary publication, Publisher's Version
S
Suckow, Timon ; Völkers, Stephan ; Bütev Öcal, Ezgi ; Grass, Markus ; Böhm, Stefan ; Groche, Peter (2022)
Effect of Shortened Post Weld Heat Treatment on the Laser Welded AA7075 Alloy.
In: Metals, 2022, 12 (3)
doi: 10.26083/tuprints-00021489
Article, Secondary publication, Publisher's Version
Drucken
Impressum